Publications associées à A spatial queuing model for the emergency vehicle districting and location problem

Publications associées (25)

Frequency response of fiber reinforced DEAs

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi

Dielectric Elastomer Actuators (DEAs) have emerged as versatile and promising devices for a multitude of applications, including soft robotics, haptic interfaces, and artificial muscles. DEAs are an interesting soft actuator technology due to their high en ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Performance and accuracy of cross‐section tracking methods for hydromorphological habitat assessment in wadable rivers with sparse canopy conditions

Giovanni De Cesare, Paolo Perona, Robin Schroff

This article investigates the performance and accuracy of continuous Real-Time Kinematic (RTK) Global Navigation Satellite System (GNSS) position tracking for hydromorphological surveys, based on a comprehensive river restoration monitoring campaign. The a ...

2024

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Data-Driven Control Synthesis using Koopman Operator: A Robust Approach

Alireza Karimi, Nathan Russell Powell, Mert Eyuboglu

This paper proposes a data-driven control design method for nonlinear systems that builds upon the Koopman operator framework. In particular, the Koopman operator is used to lift the nonlinear dynamics to a higher-dimensional space where the so-called obse ...

2024

Photonic radar for contactless vital sign detection

Yang Liu

Vital sign detection is used across ubiquitous scenarios in medical and health settings, and contact and wearable sensors have been widely deployed. However, they are unsuitable for patients with burn wounds or infants with insufficient areas for attachmen ...

Nature Publishing Group2023

Humidity-insensitive optical fibers for distributed sensing applications

Luc Thévenaz, Tiago Filipe Pimentel Das Neves

Humidity is a critical environmental factor in various applications, and its temperature dependence must be considered when developing thermo-hygrometer fiber sensors. The optical fibers that constitute the sensor must have a temperature reference, which s ...

2023

Optimizing Sales Forecasting, Inventory, Pricing and Sourcing Decisions

Yara Kayyali El Alem

In this thesis we address various factors that contribute both theoretically and practically to mitigating supply demand mismatches. The thesis is composed of three chapters, where each chapter is an independent scientific paper. In the first paper, we dev ...

EPFL2023

Achieving Optimal Performance With Data-Driven Frequency-Based Control Synthesis Methods

Alireza Karimi, Philippe Louis Schuchert

Frequency Response Function (FRF)-based control synthesis methods for Linear Time-Invariant (LTI) systems have been widely used in control theory and industry. Recently, there has been renewed interest in these methods, employing numerical optimization too ...

Ieee-Inst Electrical Electronics Engineers Inc2023

The thermodynamic and life-cycle assessments of a novel charging station for electric vehicles in dynamic and steady-state conditions

Jan Van Herle, Hossein Pourrahmani

The current study performs the thermodynamic and life-cycle assessments (LCA) of a novel charging station in two system designs. The goal is to design an efficient charging station for electric vehicles with high efficiencies and low environmental impacts ...

Nature Portfolio2023

Dalmine: From Company Town to Hybridized Productive Habitat

Anna Karla De Almeida Milani

The establishment of company towns played a significant role in developing both urban and rural areas in Europe during the nineteenth and twentieth centuries. By combining historical and urban research, this study provides findings about the industry's pol ...

Louvain research institute for Landscape, Archi- tecture, Built environment, UCLouvain2023

van der Waals Materials for Overcoming Fundamental Limitations in Photonic Integrated Circuitry

Arslan Mazitov

With the advance of on-chip nanophotonics, there is a high demand for high-refractive-index and low-loss materials. Currently, this technology is dominated by silicon, but van der Waals (vdW) materials with a high refractive index can offer a very advanced ...

AMER CHEMICAL SOC2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

Single photon detection with amorphous silicon-based microchannel plates: A Monte Carlo model

Christophe Ballif, Nicolas Würsch, Jonathan Emanuel Thomet, Janina Christine Isabelle Löffler, Samira Alexandra Frey

Microchannel plates based on amorphous silicon have the inherent capability to overcome the existing spatial and temporal resolution limitations of single photon detectors. A Monte Carlo model-based study is presented here that serves to exploit their full ...

2022

Aging investigation of the latest standard dual power modules using improved interconnect technologies by power cycling test

Yi Zhang, Rui Wu

The latest standard "New Dual" power module has been developed for both silicon and silicon-carbide devices to meet the increasing demands in high reliability and high temperature power electronic applications. Due to the new package is just starting to re ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Spray-Assisted Formation of Micrometer-Sized Emulsions

Esther Amstad, Mathias Steinacher

Emulsion drops with defined sizes are frequently used to conduct chemical reactions on picoliter scales or as templates to form microparticles. Despite tremendous progress that has been achieved in the production of emulsions, the high throughput formation ...

AMER CHEMICAL SOC2022

Systematic extraction of a control-oriented model from perturbative experiments and SOLPS-ITER for emission front control in TCV

Olivier Claude Martin Février, Artur Perek, Mirko Wensing

Systematic extraction of locally valid dynamic models from experiments is necessary for controller design and the validation of high fidelity models. This paper describes the extraction of a dynamic model in the form of a transfer function, giving the dyna ...

IOP Publishing Ltd2022

Intensification of sub-daily rainfall extremes in a low-rise urban area

Gabriele Manoli

Short-duration extreme rainfall events are the main trigger of flash and pluvial floods in cities. Depending on the local climate zone and urban fabric that affect meteorological variables such as air temperature, humidity, and aerosol concentration, the b ...

2022

Assessment of the Bus Transit Network: A Perspective from the Daily Activity-Travel Organization of Travelers

Marc-Edouard Baptiste Grégoire Schultheiss

In a context where daily car use is a spontaneous and habitual choice for a wide majority of the population, the quality of the alternatives to individual motorized vehicles is a major factor in encouraging modal shift. The ease of access to public transpo ...

MDPI2022

All-optical switching in epsilon-near-zero asymmetric directional coupler

Jiaye Wu

We propose an all-optical switch based on an asymmetric directional coupler structure with epsilon-near-zero (ENZ) layer. The nonlinear optical properties the of ENZ layer are analyzed by hot-electron dynamics process, and the all-optical operating perform ...

Nature Portfolio2022

Model order reduction based on functional rational approximants for parametric PDEs with meromorphic structure

Davide Pradovera

Many engineering fields rely on frequency-domain dynamical systems for the mathematical modeling of physical (electrical/mechanical/etc.) structures. With the growing need for more accurate and reliable results, the computational burden incurred by frequen ...

EPFL2021