Publications associées à Influence of the wetting angle on capillary forces in pressure infiltration

Publications associées (32)

Surface segregation in high-entropy alloys from alchemical machine learning

Michele Ceriotti, Sandip De, Guillaume André Jean Fraux, Arslan Mazitov, Nataliya Lopanitsyna

High-entropy alloys (HEAs), containing several metallic elements in near-equimolar proportions, have long been of interest for their unique mechanical properties. More recently, they have emerged as a promising platform for the development of novel heterog ...

Iop Publishing Ltd2024

Stability of a liquid layer draining around a horizontal cylinder: Interplay of capillary and gravity forces

François Gallaire, Shahab Eghbali, Simeon Vladimirov Djambov

We study the drainage of a viscous liquid film coating the outside of a solid horizontal cylinder, where gravity acts vertically. We focus on the limit of large Ohnesorge numbers Oh, where inertia is negligible compared to viscous effects. We first study t ...

Amer Physical Soc2024

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Helena Luisa Teixido Pedarros

Nowadays, Liquid Composite Molding techniques are often used to manufacture high quality fiber reinforced composite parts at a relatively low cost. These involve an infiltration process, in which a liquid resin is forced to ingress into a dry fibrous porou ...

EPFL2023

Thermoplastic Toughening of a Semiaromatic Polyamide with an Amino-telechelic Polyethylene

John Christopher Plummer, Holger Frauenrath, Michael Alan Giffin

Semiaromatic polyamides are used for metal replacementin advancedengineering applications to reduce weight and improve efficiency,but their range of application is limited by their inherent lack ofductility and toughness. Here, we combined semiaromatic pol ...

AMER CHEMICAL SOC2023

The influence of the gas on the dynamics of cavitation bubbles

Davide Bernardo Preso

Cavitation bubbles, extensively investigated in fluid mechanics, present enduring challenges in hydraulic machinery, while holding considerable potential for practical applications in biomedicine and sonochemistry. Despite more than a century of research, ...

EPFL2023

Effect of wettability and textile architecture on fluid displacement and pore formation during infiltration of carbon fibrous preforms

Véronique Michaud, Baris Çaglar, Helena Luisa Teixido Pedarros

We seek to address how air entrapment mechanisms during infiltration are influenced by the wetting characteristics of the fluid and the pore network formed by the reinforcement. To this end, we evaluated the behavior of two model fluids with different surf ...

Elsevier Sci Ltd2023

Columnlike free-interface flows: symmetry breaking and linear instability

Shahab Eghbali

This thesis is dedicated to the analysis of a subclass of interfacial flows, columnlike free-interface flows, from two view angles: (i) the symmetry breaking under geometry-induced or external forces, (ii) their stability against infinitesimal disturbances ...

EPFL2023

Measurement and modelling of dynamic fluid saturation in carbon reinforcements

Véronique Michaud, Baris Çaglar, Guillaume Clément Broggi, Helena Luisa Teixido Pedarros

We propose a methodology to monitor the progressive saturation of a non-translucent unidirectional carbon fabric stack through its thickness by means of X-ray radiography and extract the dynamic saturation curves using image analysis. Four constant flow ra ...

2023

Effects of surface rigidity and metallicity on dielectric properties and ion interactions at aqueous hydrophobic interfaces

Philip Robin Loche

Using classical molecular dynamics simulations, we investigate the dielectric properties at interfaces of water with graphene, graphite, hexane, and water vapor. For graphite, we compare metallic and nonmetallic versions. At the vapor-liquid water and hexa ...

AIP Publishing2022

Swelling and shrinkage of partially saturated gas shales: from laboratory tests to an effective stress framework

Jinwoo Kim

Gas shale swelling during hydraulic stimulation is one of the major challenges in unconventional gas development. It is hypothesized that the large volumetric strain upon water imbibition is a consequence of dramatic changes in capillary pressure and disjo ...

EPFL2022

From coating flow patterns to porous body wake dynamics via multiscale models

Pier Giuseppe Ledda

Multiscale phenomena are involved in countless problems in fluid mechanics. Coating flows are known to exhibit a broad variety of patterns, such as wine tears in a glass and dripping of fresh paint applied on a wall. Coating flows are typically modeled und ...

EPFL2022

Subharmonic parametric instability in nearly brimful circular cylinders: a weakly nonlinear analysis

François Gallaire, Francesco Viola, Alessandro Bongarzone

In labscale Faraday experiments, meniscus waves respond harmonically to small-amplitude forcing without threshold, hence potentially cloaking the instability onset of parametric waves. Their suppression can be achieved by imposing a contact line pinned at ...

Cambridge University Press2022

Controlling superconductivity of CeIrIn5 microstructures by substrate selection

Philip Johannes Walter Moll, Matthias Carsten Putzke, Chunyu Guo, Maarten Ruud van Delft, Joshua Alan Wolfe Straquadine

Superconductor/metal interfaces are usually fabricated in heterostructures that join these dissimilar materials. A conceptually different approach has recently exploited the strain sensitivity of heavy-fermion superconductors, selectively transforming regi ...

AIP Publishing2022

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part II: Experimental verification of modelling approaches by infiltration of Si-Zr alloy into idealized microchannels

Ludger Weber, Caroline Hain, Manoj Kondibhau Naikade

In this work, the mechanisms leading to the pore closure in reactive melt infiltration (RMI) of carbon by pure silicon and a near eutectic Si-8 at-pct Zr alloy at 1500 and 1700 degrees C under vacuum were studied. Various geometrical configurations of micr ...

ELSEVIER SCI LTD2022

Spectroscopy and dynamics at liquid water interfaces

Bruno Credidio

This thesis is a detailed description of three experimental investigations on aqueous interfaces. All projects made use of the microjet technology or the more recently developed flat-jet technique which enables the implementation of liquid water in vacuum ...

EPFL2022

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Simulating Infiltration as a Sequence of Pinning and De-pinning Processes

Andreas Mortensen, William Craig Carter

The infiltration of a non-wetting liquid, such as molten metal, into a porous solid, such as a ceramic preform, is influenced by the wetting angle of the liquid on the solid. The link between local wetting and the minimum pressure required for initiation o ...

2021

Optimization of composition and structure of cemented carbide cutting tools

Samy Adjam

WC-Co cemented carbides are composites, which combine a hard phase consisting of WC grains and a metallic ductile phase as a binder. Their excellent mechanical properties, combining high hardness, toughness and refractory properties, make them excellent ma ...

EPFL2021

Systematic investigations of uranium carbide composites oxidation from micro- to nano-scale: Application to waste disposal

Nhât-Tân Vuong

The production of radioisotope beams at the ISOLDE (Isotope Separator OnLine DEvice) facility at CERN is achieved by irradiating target materials (e.g. uranium carbides and metal foils) with protons. The materials are usually operated at temperatures above ...

EPFL2021

Nanoparticle-Induced Disorder at Complex Liquid-Liquid Interfaces: Effects of Curvature and Compositional Synergy on Functional Surfaces

Francesco Stellacci, Youwei Ma

The self-assembly of surfactant monolayers at interfaces plays a sweeping role in tasks ranging from household cleaning to the regulation of the respiratory system. The synergy between different nanoscale species at an interface can yield assemblies with e ...

AMER CHEMICAL SOC2021