Publications associées à A 7.5mA 500 MHz UWB receiver based on super-regenerative principle

Publications associées (29)

A 0.14-nJ/b 200-Mb/s 2.7-3.5-GHz Quasi-Balanced FSK Transceiver With PLL-Based Modulation and Sideband Energy Detection

This paper describes a balanced frequency shift keying (FSK) modulation, namely quasi-balanced FSK (QB-FSK), for energy-efficient high-data-rate communication. Not suffering from data-pattern dependency, the proposed modulation method enables frequency mod ...

2024

Numerical and experimental investigations of a microwave interferometer for the negative ion source SPIDER

Ivo Furno, Rémy Jacquier, Riccardo Agnello

The electron density close to the extraction grids and the co-extracted electrons represent a crucial issue when operating negative ion sources for fusion reactors. An excessive electron density in the plasma expansion region can indeed inhibit the negativ ...

IOP Publishing Ltd2023

Self-powered transformer intelligent wireless temperature monitoring system based on an ultra-low acceleration piezoelectric vibration energy harvester

Xin Chen

The wireless sensor nodes used for monitoring the condition of grid equipment always be powered by disposable batteries. However, it introduces disadvantages, such as inconvenient replacement, short lifespan, and envi-ronmental pollution, significantly imp ...

Elsevier2023

Subthreshold VO2 vertical switches for large-bandwidth millimeter-wave and sub-terahertz detection

Mihai Adrian Ionescu, Fatemeh Qaderi Rahaqi, Ali Gilani, Daesung Park

n-linear impedance characteristics of VO2 offer solutions to highly sensitive radio-frequency (RF), millimeterwave (mm-wave), and terahertz (THz) detectors. We demonstrate high-speed broadband sensibility of miniaturized VO2 switches by utilizing the nonli ...

IEEE2022

A Cryo-CMOS Wideband Quadrature Receiver With Frequency Synthesizer for Scalable Multiplexed Readout of Silicon Spin Qubits

Edoardo Charbon, Andrea Ruffino, Yatao Peng

In this article, a cryo-CMOS receiver integrated with a frequency synthesizer for scalable multiplexed readout of qubits is presented, focusing on radio frequency (RF) reflectometry readout of silicon-based semiconductor spin qubits/quantum dots. The propo ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

A Maximum-Likelihood-Based Two-User Receiver for LoRa Chirp Spread-Spectrum Modulation

Andreas Peter Burg, Alexios Konstantinos Balatsoukas Stimming, Orion Afisiadis, Joachim Tobias Tapparel

Long Range (LoRa) is an emerging low-power wide-area network technology offering long-range wireless connectivity to Internet of Things (IoT) devices. For energy efficiency reasons, LoRa end nodes implement a nonslotted ALOHA multiple access scheme to tran ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Strategies, Techniques and Systems for powering low-maintenance and battery-free devices through Energy Harvesting and Wireless Power Transfer

Roberto La Rosa

The purpose of this research has a background in the market for Internet of Things (IoT)devices and wireless sensor networks. The Market Forecast predicts the connection of a trillion"things" by 2025. The global smart sensor market size trend grows from US ...

EPFL2022

Enhancing the Reliability of Dense LoRaWAN Networks With Multi-User Receivers

Andreas Peter Burg, Joachim Tobias Tapparel

LoRaWAN is a low-power wireless technology that provides long-range connectivity to battery-powered Internet of Things (IoT) devices. To minimize the energy consumption of the IoT nodes, LoRaWAN networks use for the uplink a pure non-slotted ALOHA multiple ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

An Energy-Autonomous Wireless Sensor With Simultaneous Energy Harvesting and Ambient Light Sensing

Andreas Peter Burg, Catherine Dehollain, Roberto La Rosa

Wireless sensor nodes (WSNs) are generally powered by batteries, which results in a substantial limitation to the places where the nodes can be installed, to the maximum number of deployable devices, and to the node lifetime. To meet the demand for Interne ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Physical Layer Aspects of LoRa and Full-Duplex Wireless Transceivers

Orion Afisiadis

Wireless communications are currently faced with two main challenges. The first challenge stems from the enormous number of Internet of Things (IoT) devices that transmit very small amounts of data. The second challenge is the need for ever-increasing data ...

EPFL2020

Speed detection of battery-free nodes based on RF Wireless Power Transfer

Catherine Dehollain, Roberto La Rosa

In the Internet of Things (IoT) era, Wireless Sensor Networks (WSNs) are rapidly increasing in terms of relevance and pervasiveness thanks to their notable real-time monitoring performance across several fields, including industrial, domestic, military, bi ...

IEEE2020

Advanced Techniques for Powering Wireless Sensor Nodes through Energy Harvesting and Wireless Power Transfer

Roberto La Rosa

This paper presents three different techniques for efficiently powering an energy-autonomous wireless sensor (EAWS) through both energy harvesting (EH) and RF wireless power transfer (WPT). The aim of the paper is to provide effective strategies and techni ...

IEEE2020

Advanced Monitoring Systems Based on Battery-Less Asset Tracking Modules Energized through RF Wireless Power Transfer

Catherine Dehollain, Roberto La Rosa

Asset tracking involving accurate location and transportation data is highly suited to wireless sensor networks (WSNs) featuring battery-less nodes that can be deployed in virtually any environment and require little or no maintenance. In response to the g ...

2020

High-Accuracy Calibration-Free Calorimeter for the Measurement of Low Power Losses

Elison de Nazareth Matioli, Remco Franciscus Peter van Erp, Armin Jafari, Mohammad Samizadeh Nikooytabalvandani, Reza Soleiman Zadeh Ardebili, Enea Figini

Wide-band-gap technologies enable ultra-high efficiencies in high-frequency power conversion. However, inadequate accuracies in electrical measurements could lead to spurious efficiency measurements, even above 100%. Furthermore, bandwidth limitations, par ...

2020

Analysis, modeling and design of a CMOS Super-Regenerative Receiver for implanted medical devices under square and sinusoidal quench signals

Catherine Dehollain, Naci Pekçokgüler

Medical implant devices have found widespread application in recent years. The Super-Regenerative Receiver has been one preferred architecture due to its power advantage over other architectures. We present a detailed analysis of the circuits and their equ ...

ELSEVIER SCIENCE BV2019

Tokamak plasma edge studies by microwave short-pulse reflectometry and backscattering

Pedro Andres Molina Cabrera

Moving towards an increased understanding of the dynamic processes in the edge of tokamak plasmas requires continuous innovation in diagnostic capabilities, pushing the envelope in both spatial and temporal dimenstions. Plasma density and rotation, and the ...

EPFL2019

Wireless Power Transfer and Data Communication for Implantable Autonomous Monitoring and Detection of Epilepsy In Vivo

Kerim Türe

The impact of technological advancement became significant and still has an essential role to play in the diagnosis and treatment of diseases. Nowadays, personalized medicine and therapy are on the rise as a consequence of the developed and cheaper medical ...

EPFL2019

Ultra Low Power FM-UWB Transceiver for High-Density Wireless Sensor Networks

Vladimir Kopta

The WiseSkin project aims to provide a non-invasive solution for restoration of a natural sense of touch to persons using prosthetic limbs. By embedding sensor nodes into the silicone coating of the prosthesis, which acts as a sensory skin, WiseSkin target ...

EPFL2018

A 100 kb/s, 4 GHz, 267 mu W Fully Integrated Low Power FM-UWB Transceiver with Multiple Channels

Christian Enz, Vladimir Kopta

A 4 GHz, 100 kb/s FM-UWB transceiver for short-range communications in a body area network is presented. Two receivers and a transmitter use the same RF port with a fully-integrated matching network. The first receiver provides multi-user communication cap ...

IEEE2018

Signal processing apparatus and method for transmitting and receiving coherent parallel optical signals

Tobias Kippenberg

A signal processing apparatus, being configured for transmitting and receiving coherent parallel optical signals, comprises a transmitter apparatus including a first single soliton micro-resonator device and a modulator device, wherein the first single sol ...

2018