Publications associées à Radiation damage in ferritic/martensitic steels for fusion reactors: a simulation point of view

DEMO toroidal field coil fast discharge unit integration studies

The Fast Discharge Units (FDUs) of the Superconducting (SC) Toroidal Field (TF) coils in the European demonstration fusion power plant DEMO warrant the machine integrity over its full lifetime against severe failure events, such as SC coil quenches or any ...

Elsevier Science Sa2024

Overview of fast particle experiments in the first MAST Upgrade experimental campaigns

Matteo Vallar

MAST-U is equipped with on-axis and off-axis neutral beam injectors (NBI), and these external sources of super-Alfv & eacute;nic deuterium fast-ions provide opportunities for studying a wide range of phenomena relevant to the physics of alpha-particles in ...

IOP Publishing Ltd2024

Global fluid simulations of plasma turbulence in stellarators

António João Caeiro Heitor Coelho

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

EPFL2024

Divertor turbulence characterisation using Gas Puff Imaging in the TCV tokamak

Curdin Tobias Wüthrich

The performance of magnetic confinement fusion devices, such as tokamaks, is strongly correlated to the phenomena that occur in the boundary region of the plasma core that faces the wall of the device. The dominant cross-field transport mechanisms from the ...

EPFL2024

Re-design of EU DEMO with a low aspect ratio

Hartmut Zohm

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

2024

High brightness neutron source optimized for very high pulsed magnetic field experiments

Mina Akhyani

Conducting neutron scattering experiments in the presence of high pulsed magnetic fields, namely above 40 T, provides valuable information about the magnetic structures of materials. However, these experiments are challenging and time-consuming because the ...

EPFL2024

Nonlinear simulation of plasma turbulence using a gyrokinetic moment-based approach

Antoine Cyril David Hoffmann

Plasma turbulence plays a fundamental role in determining the performances of magnetic confinement fusion devices, such as tokamaks. Advances in computer science, combined with the development of efficient physical models, have significantly improved our u ...

EPFL2024

Long plasma duration operation analyses with an international multi-machine (tokamaks and stellarators) database

Stefano Coda, Jeffrey Huang

Combined high-fusion performance and long-pulse operation is one of the key integration challenges for fusion energy development in magnetic devices. Addressing these challenges requires an integrated vision of physics and engineering aspects with the purp ...

IOP Publishing Ltd2024

Models implemented in the methodological approach to design the initial STEP first wall contour

Kevin Henricus Annemarie Verhaegh, Dario Vaccaro, Filippo Bagnato, Davide Galassi

The official Spherical Tokamak for Energy Production mission aims to demonstrate the ability to generate net electricity from fusion with the STEP Prototype Power plant. One of the key technological and engineering challenges in fusion power plants is mana ...

Elsevier Science Sa2024

Error field detection and correction studies towards ITER operation

Olivier Sauter, Leonardo Pigatto, Bernhard Sieglin

In magnetic fusion devices, error field (EF) sources, spurious magnetic field perturbations, need to be identified and corrected for safe and stable (disruption-free) tokamak operation. Within Work Package Tokamak Exploitation RT04, a series of studies hav ...

IOP Publishing Ltd2024

Demonstration of a sparse sensor placement technique to the limited diagnostic set in a fusion power plant

Lorenzo Martinelli, Artur Perek

DEMO will have a limited diagnostic set for optimization of reactor performance, and limited diagnostic coverage due to challenging reactor conditions. This poses challenges for control, especially for detachment control which is planned to be performed wi ...

Elsevier Science Sa2024

First-principle based predictions of the effects of negative triangularity on DTT scenarios

Olivier Sauter, Gabriele Merlo, Alberto Mariani

Plasmas with negative triangularity (NT) shape have been recently shown to be able to achieve H-mode levels of confinement in L-mode, avoiding detrimental edge localised modes. Therefore, this plasma geometry is now studied as a possible viable option for ...

IOP Publishing Ltd2024

Innovative dud detection based on JET DT experience

Olivier Sauter, Alessandro Pau

DT operations at JET gave a unique and invaluable opportunity to design, develop and test real -time controllers that will be applied in future burning plasma devices, as ITER and SPARC. Among them, the dud detector [L. Piron et al. 2019 Fusion Eng. Design ...

Elsevier Science Sa2024

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

Rainer Wesche, Frédéric Michel, Roberto Guarino

The magnet feeders are part of the critical systems of a fusion reactor since they represent the interface between the in-cryostat components at 4.5 K and the room-temperature cryogenic plant and power supply. The European DEMO tokamak foresees 16 toroidal ...

2024

Experimental study and interpretative modelling of the Power Exhaust in Configurations with Multiple X-Points in TCV

Sophie Danielle Angelica Gorno

Nuclear fusion presents a promising clean energy source to mitigate future energy crises, with magnetic confinement fusion well-positioned to provide a baseload scenario to power future reactors. The unmitigated power exhaust of such reactors threatens its ...

EPFL2024

Scenario optimization for the tokamak ramp-down phase in RAPTOR: A. Analysis and model validation on ASDEX Upgrade

Olivier Sauter, Federico Alberto Alfredo Felici, Anna Teplukhina, Simon Van Mulders, Cassandre Ekta Contré, Bernhard Sieglin

We discuss how the combination of experimental observations and rapid modeling has enabled to improve understanding of the tokamak ramp-down phase in ASDEX Upgrade. A series of dedicated experiments has been performed, to disentangle the effect of individu ...

Iop Publishing Ltd2024

Modeling friction and wear using an adaptive discrete-continuum coupling

Manon Eugénie Voisin--Leprince

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

Gyrokinetic simulations of turbulence in magnetic fusion plasmas using a delta-f PIC scheme with evolving background

Moahan Murugappan

Using the GKEngine code which simulates an electrostatic plasma with adiabatic electron response under a sheared-slab geometry, an attempt at developing a hybrid approach between the delta-f and full-f schemes to describe plasma profiles exhibiting high fl ...

EPFL2024

Single-Photon Avalanche Diode Image Sensors for Harsh Radiation Environments

Ming-Lo Wu

The space industry has experienced substantial growth in recent years, leading to rapid advancements in space exploration and space-based technologies. Consequently, the study of electronics and sensor performance in extreme environments has become crucial ...

EPFL2024

Tangentially viewing phase contrast imaging for turbulence measurements in toroidal fusion devices

Stefano Coda

Phase contrast imaging (PCI) is an established and powerful technique for measuring density fluctuations in plasmas and has been successfully applied to several fusion devices. Rooted in a concept first developed for microscopy, PCI belongs to the category ...

2024