Publications associées à Feedback and rotational stabilization of resistive wall modes in ITER

Progress in the development of the ITER baseline scenario in TCV

Olivier Sauter, Stefano Coda, Alexander Karpushov, Yann Camenen, Benoît Labit, Antoine Pierre Emmanuel Alexis Merle, Olivier Claude Martin Février, Simon Van Mulders, Filippo Bagnato, Alessandro Pau, Matteo Vallar, Cassandre Ekta Contré, Stefano Marchioni, Oleg Krutkin, Reinart Andreas J. Coosemans

Under the auspices of EUROfusion, the ITER baseline (IBL) scenario has been jointly investigated on AUG and TCV in the past years and this paper reports on the developments on TCV. It is found that the performance of TCV IBL is mainly limited by (neoclassi ...

2024

Global fluid simulations of plasma turbulence in stellarators

António João Caeiro Heitor Coelho

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

EPFL2024

Re-design of EU DEMO with a low aspect ratio

Hartmut Zohm

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

2024

The effect of plasma shaping on high density H-mode SOL profiles and fluctuations in TCV

Holger Reimerdes, Benoît Labit, Christian Gabriel Theiler, Cedric Kar-Wai Tsui, Umar Sheikh, Nicola Vianello, Sophie Danielle Angelica Gorno, Claudia Colandrea, Adriano Stagni, Guang-Yu Sun, Luke Simons, Yi Wang

The impact of plasma shaping on the properties of high density H-mode scrape-off layer (SOL) profiles and transport at the outer midplane has been investigated on Tokamaka configuration variable. The experimental dataset has been acquired by evolving the u ...

IOP Publishing Ltd2024

Global fluid simulation of plasma turbulence in stellarators with the GBS code

Joaquim Loizu Cisquella, Paolo Ricci, António João Caeiro Heitor Coelho

The implementation of three-dimensional magnetic fields, such as the ones of stellarators, in the GBS code (Ricci et al 2012 Plasma Phys. Control. Fusion54 124047; Giacomin et al 2022 J. Comput. Phys.464 111294) is presented, and simulation results are dis ...

IOP Publishing Ltd2024

Experimental study and interpretative modelling of the Power Exhaust in Configurations with Multiple X-Points in TCV

Sophie Danielle Angelica Gorno

Nuclear fusion presents a promising clean energy source to mitigate future energy crises, with magnetic confinement fusion well-positioned to provide a baseload scenario to power future reactors. The unmitigated power exhaust of such reactors threatens its ...

EPFL2024

Scenario optimization for the tokamak ramp-down phase in RAPTOR. Part B: safe termination of DEMO plasmas

Olivier Sauter, Emiliano Fable, Federico Alberto Alfredo Felici, Anna Teplukhina, Simon Van Mulders, Cassandre Ekta Contré

An optimized plasma current ramp-down strategy is critical for safe and fast termination of plasma discharges in a tokamak demonstration fusion reactor (DEMO), both in planned and emergency scenarios, avoiding plasma disruptions and excessive heat loads to ...

Iop Publishing Ltd2024

Nonlinear simulation of plasma turbulence using a gyrokinetic moment-based approach

Antoine Cyril David Hoffmann

Plasma turbulence plays a fundamental role in determining the performances of magnetic confinement fusion devices, such as tokamaks. Advances in computer science, combined with the development of efficient physical models, have significantly improved our u ...

EPFL2024

Interpretative 3D MHD modelling of deuterium SPI into a JET H-mode plasma

Umar Sheikh, Mengdi Kong, Cristian Sommariva, Haomin Sun

The pre-thermal quench (pre-TQ) dynamics of a pure deuterium ( D 2 ) shattered pellet injection (SPI) into a 3 MA / 7 MJ JET H-mode plasma is studied via 3D non-linear MHD modelling with the JOREK code. The interpretative modelling captures the overall evo ...

IOP Publishing Ltd2024

Gyrokinetic simulations of turbulence in magnetic fusion plasmas using a delta-f PIC scheme with evolving background

Moahan Murugappan

Using the GKEngine code which simulates an electrostatic plasma with adiabatic electron response under a sheared-slab geometry, an attempt at developing a hybrid approach between the delta-f and full-f schemes to describe plasma profiles exhibiting high fl ...

EPFL2024

Modelling of energetic particle drive and damping effects on TAEs in AUG experiment with ECCD

Alexander Karpushov, Giovanni Tardini

The impact of electron cyclotron current drive (ECCD)-driven current on toroidicity-induced Alfven eigenmodes (TAEs) in experiments on the AUG tokamak is investigated numerically. The dynamical evolution of the plasma profiles and equilibria are modelled w ...

IOP Publishing Ltd2024

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Mengdi Kong

The heat flux mitigation during the thermal quench (TQ) by the shattered pellet injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma parameters, and is ult ...

IOP Publishing Ltd2024

Gyrokinetic turbulence modeling of a high performance scenario in JT-60SA

Stephan Brunner, Stefano Coda, Aylwin Iantchenko

Local gyrokinetic simulations are used to model turbulent transport for the first time in a representative high-performance plasma discharge projected for the new JT-60SA tokamak. The discharge features a double-null separatrix, 41 MW of combined neutral b ...

IOP Publishing Ltd2024

Study of impurity C transport and plasma rotation in negative triangularity on the TCV tokamak

Basil Duval, Olivier Sauter, Stefano Coda, Alexander Karpushov, Laurie Porte, Benoît Labit, Antoine Pierre Emmanuel Alexis Merle, Justin Richard Ball, Filippo Bagnato, Alessandro Pau, Dmytry Mykytchuk

Carbon impurity transport is studied in the TCV tokamak using a charge exchange recombination diagnostic. TCVs flexible shaping capabilities were exploited to extend previous impurity transport studies to negative triangularity (delta < 0). A practical way ...

Iop Publishing Ltd2024

Occam's razor on the mechanism of resistive-wall-mode-induced beta limits in diverted tokamaks

Jonathan Graves, Daniele Brunetti

External kink modes, believed to be the drive of the 0-limiting resistive wall mode, are strongly stabilized by the presence of a separatrix. We thus propose a novel mechanism explaining the appearance of long-wavelength global instabilities in free bounda ...

2023

Full-discharge simulation and optimization with the RAPTOR code, from present tokamaks to ITER and DEMO

Simon Van Mulders

Tokamak devices aim to magnetically confine a hydrogen plasma at sufficiently high pressure to achieve net energy production from nuclear fusion of light isotopes. Predictive modeling and optimization is crucial for reliable operation of tokamak reactors, ...

EPFL2023

Studies on EU-DEMO 3D coils requirements and conceptual design for error field correction and plasma control

Pierluigi Bruzzone, Hartmut Zohm, Leonardo Pigatto

This work presents the initial studies on the requirements for the design of 3D coils on EU-DEMO. The use of 3D coils in present machines includes two main purposes: the first one is the Error Field Correction (EFC). The EFC aims at minimizing the intrinsi ...

Elsevier Science Sa2023

Numerical tools for burning plasmas

Laurent Villard, Alberto Bottino, Jonathan Graves, Ben McMillan, Emmanuel Lanti, Emanuele Poli, Xiao Wang, Baruch Rofman

The software stack under development within a European coordinated effort on tools for burning plasma modelling is presented. The project is organised as a Task (TSVV Task 10) under the new E-TASC initiative (Litaudon et al 2022 Plasma Phys. Control. Fusio ...

IOP Publishing Ltd2023

High power mm-wave loss measurements of ITER ex-vessel waveguide components at the FALCON test facility at the Swiss Plasma Center

René Chavan, Timothy Goodman, Avelino Mas Sanchez, Anastasia Xydou, Humberto Torreblanca Quiroz

Many future fusion devices will rely heavily, if not solely, on electron cyclotron (EC) heating subsystems to provide bulk heating, instability control (neoclassical tearing mode (NTM) stabilization), and thermal instability control. Efficient use of the i ...

E D P SCIENCES2023

The JET hybrid scenario in Deuterium, Tritium and Deuterium-Tritium

Mikhail Maslov, Javier García Hernández, Matteo Fontana, Haomin Sun

The JET hybrid scenario has been developed from low plasma current carbon wall discharges to the record-breaking Deuterium-Tritium plasmas obtained in 2021 with the ITER-like Be/W wall. The development started in pure Deuterium with refinement of the plasm ...

IOP Publishing Ltd2023