Publications associées à Improving solvent-based self-healing materials through shape memory alloys

Enabling simultaneous reprocessability and fire protection via incorporation of phosphine oxide monomer in epoxy vitrimer

The conception of epoxy thermosets with both reprocessability and flame retardancy delineates a new horizon in polymer science, offering a material solution that is not only superior in fire safety but is also environment friendly. Herein, a flame-retardan ...

Journal Mater Sci Technol2024

Flash Melting Amorphous Ice

Marcel Drabbels, Ulrich Lorenz, Constantin Richard Krüger, Gabriele Bongiovanni, Nathan Junior Mowry

Water can be vitrified if it is cooled at high rates, which makes it possible to outrun crystallization in so-called no man’s land, a range of deeply supercooled temperatures where water crystallizes rapidly. Here, we study the reverse process in pure wate ...

2024

Shaped Laser Pulses for Microsecond Time-Resolved Cryo-EM: Outrunning Crystallization during Flash Melting

Marcel Drabbels, Ulrich Lorenz, Constantin Richard Krüger, Nathan Junior Mowry

Water vitrifies if cooled at rates above 3 × 105 K/s. In contrast, when the resulting amorphous ice is flash heated, crystallization occurs even at a more than 10 times higher heating rate, as we have recently shown. This may present an issue for microseco ...

2024

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Thomas Maeder, Jürgen Brugger, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Decomposition method to evaluate district heating/cooling network potential at urban scale

Luc Girardin, François Maréchal, Raphaël Briguet, Ana Catarina Gouveia Braz, Bingqian Liu

In this work, a tool to design district heating networks (DHN) is presented and applied to the city of Lausanne as a case study. The evaluation of the buildings’ heat/cooling demand is performed using a Geographic Information System (GIS) database, built f ...

Associazione Italiana Di Ingegneria Chimica2024

Recyclable flame retardant phosphonated epoxy based thermosets enabled via a reactive approach

Véronique Michaud, Valentin Rougier

The development of reusable fire-safe polymers with a prolonged lifetime heralds the switch for a transition towards circular economy. In this framework, we report a novel phosphonated thermoset which is composed of networked phosphonate esters containing ...

ELSEVIER SCIENCE SA2023

Nanoscale thermal control of a single living cell enabled by diamond heater-thermometer

Aleksandra Radenovic, Evgenii Glushkov

We report a new approach to controllable thermal stimulation of a single living cell and its compartments. The technique is based on the use of a single polycrystalline diamond particle containing silicon-vacancy (SiV) color centers. Due to the presence of ...

Nature Portfolio2023

Strategies for energy-efficient frontal polymerisation processing and microstructural evaluation of fibre reinforced composites

Jacobus Gerardus Rudolph Staal

Liquid composite moulding methods are widely applied for manufacturing of fibre reinforced polymer (FRP) composites and consist of two main stages: impregnation of fibrous reinforcements by a liquid monomer resin and curing of this resin. This thesis work ...

EPFL2023

Laser powder bed fusion of Fe-based shape memory alloys for novel structural metamaterials and "smart" structures

Irene Ferretto

Laser powder bed fusion (LPBF) is a powder-based additive manufacturing (AM) technique, which shows great potential in the production of complex-shaped parts with unprecedented design freedom. In addition, it allows for an active manipulation of the micros ...

EPFL2023

Designing a District Energy Infrastructure-a Case-Study in Lisbon

François Maréchal, Sébastien Cajot, Nils Christian Schüler

The paper describes a case study on the design of district energy infrastructure for the green-field project of the Vale de Santo Antonio (Lisbon, Portugal). The methodology is based on a novel framework built on the sequential integration of three softwar ...

FRONTIERS MEDIA SA2022

Designing compliant mechanisms composed of shape memory alloy and actuated by induction heating

Paolo Germano, Yves Perriard, Sean Thomas, Adrien Jean-Michel Thabuis, Thomas Guillaume Martinez

Shape Memory Alloys (SMAs) are a type of smart materials that reacts mechanically to heat. Due to their complex behavior, they are often used in a simple geometry such as wires. This constrains the output displacement of the alloy to a simple linear contra ...

2021

Critical crystallization properties of an industrial-grade Zr-based metallic glass used in additive manufacturing

Jamasp Jhabvala, Roland Logé, Navid Sohrabi

The major challenge to overcome when processing metallic glasses (MGs) is to avoid crystallization. Therefore, time-temperature-transformation (TTT) diagrams are used, but they are often derived from experiments in which heating or cooling rates are limite ...

2021

Experimental behavior of iron-based shape memory alloys under cyclic loading histories

Elyas Ghafoori, Albano António De Abreu E Presa De Castro E Sousa, Diego Isidoro Heredia Rosa, Masoud Motavalli, Dimitrios Lignos, Alexander Riley Hartloper

The present paper investigates the behavior of iron-based shape memory alloys (Fe-SMAs) subjected to cyclic inelastic straining by means of uniaxial coupon experiments. The tests feature round bar coupons subjected to a broad range of uniaxial cyclic strai ...

2021

Automatic raclette machine

Hugo Calamandrei

Provided herein is A raclette cheese scraping machine comprising a support for a raclette cheese wheel, said support having a motorized rotating shaft, said shaft being insertable into a raclette cheese wheel and being capable of driving said cheese wheel ...

2021

Experimental analysis of a thermoactive underground railway station

Lyesse Laloui, Azad Koliji, Tohid Kazerani, Alessio Ferrari, Jacopo Zannin

Little is known about the real energy potential of thermoactive underground infrastructures, such as railway stations, that can act as a heating/cooling provider for the built environment. This study presents the results of thermomechanical full-scale in s ...

2021

Optimization of composition and structure of cemented carbide cutting tools

Samy Adjam

WC-Co cemented carbides are composites, which combine a hard phase consisting of WC grains and a metallic ductile phase as a binder. Their excellent mechanical properties, combining high hardness, toughness and refractory properties, make them excellent ma ...

EPFL2021

In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials

Danick Briand, Sébastien Lani, Olivier Rémy Henry Chandran, Rubaiyet Iftekharul Haque, Ryan Mitchell van Dommelen

In-situ laser sintering can be used to locally sinter conductive inks in an uninterrupted process, enabling the embedding of printed electronics within 3D printed structures. In this work we apply a laser sintering method to create highly conductive silver ...

2021

3D spacers enhance flow kinetics in resin transfer molding with woven fabrics

Véronique Michaud, Damiano Salvatori, Baris Çaglar

Impregnation time in Resin Transfer Molding (RTM) is directly proportional to resin viscosity and inversely proportional to fabric permeability, limiting the use of high-viscosity resins with conventional reinforcements. In this study, we show how to reduc ...

2019

Behavior of iron-based Shape Memory Alloys under Cyclic Loading Histories

Albano António De Abreu E Presa De Castro E Sousa, Diego Isidoro Heredia Rosa, Masoud Motavalli, Dimitrios Lignos, Alexander Riley Hartloper

Shape memory alloys (SMAs) have gained considerable attention in a broad range of engineering applications. In particular, iron-based SMAs (Fe-SMAs) have been recently developed and used as a cost-effect method for prestressed-strengthening of civil struct ...

2019

Long-term performance and life cycle assessment of energy piles in three different climatic conditions

Lyesse Laloui, Alessio Ferrari, Melis Sütman, Gianluca Speranza

The main purpose behind the use of energy piles is to enable the exploitation of geothermal energy for meeting the heating/cooling demands of buildings in an efficient and environment-friendly manner. However, the long-term performance of energy piles in d ...

Pergamon-Elsevier Science Ltd2020