Publications associées à A new implantable device for telemetric control of pulmonary blood flow

Inhalation of Microplastics—A Toxicological Complexity

Florian Frédéric Vincent Breider, Myriam Borgatta

Humans are chronically exposed to airborne microplastics (MPs) by inhalation. Various types of polymer particles have been detected in lung samples, which could pose a threat to human health. Inhalation toxicological studies are crucial for assessing the e ...

2024

Dynamic Behavior of Spatially Confined Sn Clusters and Its Application in Highly Efficient Sodium Storage with High Initial Coulombic Efficiency

Xu Xu, Kumar Varoon Agrawal, Lei Zhang, Kangning Zhao

Advanced battery electrodes require a cautious design of microscale particles with built-in nanoscale features to exploit the advantages of both micro- and nano-particles relative to their performance attributes. Herein, the dynamic behavior of nanosized S ...

Wiley-V C H Verlag Gmbh2024

MEMS-based Tunable Metasurface for Reflective Display Applications

Dorian Giraud Herle

In an era where portable electronic devices are indispensable for a wide range of activities, the need for displays that provide both long-lasting battery life and excellent visibility in different lighting conditions is increasingly important. Emissive di ...

EPFL2024

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

Topology Repairing of Disconnected Pulmonary Airways and Vessels: Baselines and a Dataset

Jiancheng Yang

Accurate segmentation of pulmonary airways and vessels is crucial for the diagnosis and treatment of pulmonary diseases. However, current deep learning approaches suffer from disconnectivity issues that hinder their clinical usefulness. To address this cha ...

Springer International Publishing Ag2023

A colloidal aqueous electrolyte modulated by oleic acid for durable zinc metal anode

Di Yang, Kangning Zhao, Xu Zhang

Continuous dendrites growth, as well as corrosion and side reactions of Zn metal anode seriously hinder the development of aqueous zinc ion batteries. To address these issues, oleic acid (OA) is dispersed into a 2 M ZnSO4 solution to form a novel colloidal ...

ELSEVIER SCIENCE SA2023

A fluoropolymer bifunctional solid membrane interface for improving the discharge duration in aqueous Al-air batteries

Thi Ha My Pham, Andreas Züttel, Liping Zhong, Meixia Zhang, Manhui Wei

Herein, a fluoropolymer bifunctional solid membrane interface (SMI) for an aqueous Al-air battery is proposed, which inhibits anodic self-corrosion, while concurrently reducing the accumulation of undesirable by-products. A battery using the SMI exhibits a ...

Royal Society of Chemistry2023

Predictive health assessment for lithium-ion batteries with probabilistic degradation prediction and accelerating aging detection

Florent Evariste Forest, Yunhong Che

Predictive health assessment is of vital importance for smarter battery management to ensure optimal and safe operations and thus make the most use of battery life. This paper proposes a general framework for battery aging prognostics in order to provide t ...

Elsevier Sci Ltd2023

Real-time Personalized Monitoring of Neurological Disorders on Wearable Systems

Renato Zanetti

The terminology of neurological disorders encompasses a range of serious illnesses (e.g., epilepsy, Alzheimer's disease) leading to morbidity, disability, and stigma. Epilepsy alone affects over 50 million people worldwide, and these figures are rising as ...

EPFL2023

Integrated Electronics for Deep Implants to Remotely Monitor Hemodynamics

Mustafa Besirli

The integration of technology in the medical field has greatly improved accuracy in diagnoses, thus leading to more effective treatments. Wearable and implantable medical devices offer great potential for remote patient monitoring, particularly for heart f ...

EPFL2023

Compliance-matching vascular grafts with personalization potential

Georgios Rovas

Aortic diseases are characterized by dire prognosis and inadequate diagnosis, owing to their insidious yet lethal nature. Aortopathies, namely aortic aneurysms and dissections, along with certain congenital diseases, might necessitate surgical replacement ...

EPFL2023

Multi-site, Multi-domain Airway Tree Modeling

Boyu Zhang, Jiancheng Yang, Ying Zhu, Yi Wu

Open international challenges are becoming the de facto standard for assessing computer vision and image analysis algorithms. In recent years, new methods have extended the reach of pulmonary airway segmentation that is closer to the limit of image resolut ...

Elsevier2023

Design and computational optimization of compliance-matching aortic grafts

Nikolaos Stergiopoulos, Vasiliki Bikia, Georgios Rovas

Introduction: Synthetic vascular grafts have been widely used in clinical practice for aortic replacement surgery. Despite their high rates of surgical success, they remain significantly less compliant than the native aorta, resulting in a phenomenon calle ...

FRONTIERS MEDIA SA2023

An Implantable Inductive Sensor for Direct and Continuous Monitoring of the Pulmonary Artery Cross-Sectional Area

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli

This paper presents a novel method for the measure of the cross-sectional area (CSA) of an artery to be used for the direct and continuous (24/7) monitoring of cardiac output (CO). The method is based on the inductance change of an anchoring loop mounted o ...

IEEE2022

What Makes for Automatic Reconstruction of Pulmonary Segments

Bo Du, Li Zhang, Hongwei Li, Jiancheng Yang, Jingyu Li

3D reconstruction of pulmonary segments plays an important role in surgical treatment planning of lung cancer, which facilitates preservation of pulmonary function and helps ensure low recurrence rates. However, automatic reconstruction of pulmonary segmen ...

SPRINGER INTERNATIONAL PUBLISHING AG2022

A Battery-Free Wireless Smart Sensor platform with Bluetooth Low Energy Connectivity for Smart Agriculture

Catherine Dehollain, Roberto La Rosa

Smart agriculture systems, which integrate sensors and data analysis into agricultural production processes, are increasingly proving an effective solution for reducing food production waste, yield production increase, and product quality improvement. In t ...

IEEE2022

Synergic Effect of Dendrite-Free and Zinc Gating in Lignin-Containing Cellulose Nanofibers-MXene Layer Enabling Long-Cycle-Life Zinc Metal Batteries

Kangning Zhao, Xu Zhang, Zequan Li

Uncontrollable zinc dendrite growth and parasitic reactions have greatly hindered the development of high energy and long life rechargeable aqueous zinc-ion batteries. Herein, the synergic effect of a bifunctional lignin-containing cellulose nanofiber (LCN ...

WILEY2022

An Energy-Efficient Bridge-to-Digital Converter for Implantable Pressure Monitoring Systems

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Franco Maloberti, Kerim Türe, Mustafa Besirli

This paper presents an energy-efficient, duty-cycled, and spinning excitation bridge-to-digital converter (BDC) designed for implantable pressure sensing systems. The circuit provides the measure of the pulmonary artery pressure that is particularly releva ...

2022

Redox dual-flow battery for combined electricity storage and hydrogen production

Danick Reynard

The energy transition towards a carbon-neutral and sustainable economy is one of the greatest challenges of the 21st century to combat global warming and pollution. The decarbonization process is affecting every sector of the economy (electricity, transpor ...

EPFL2022

Optimization and dynamic responses of an integrated fuel cell and battery system for an 800 kW ferry: A case study

Jan Van Herle, Martin Daniel Gay, Hossein Pourrahmani

The recent targets by different countries to stop the sales or registrations of internal combustion engines (ICE) have led to the further development of battery and fuel cell technologies to provide power for different applications. The main aim of this st ...

ELSEVIER2022