Publications associées à Effect of concurrent precipitation on the texture evolution during continuous heating of multi directionally forged solution treated Al-Cu-Mg alloy

Publications associées (31)

Fabrication of fluid-compatible trilayer cantilevers with integrated piezoelectric actuators

Luis Guillermo Villanueva Torrijo, Georg Fantner, Damien Maillard, Nahid Hosseini, Mustafa Kangül, Matthias Neuenschwander

Microcantilevers are popular transducers thanks to their simple design and a high sensitivity. In many applications, the cantilevers need to be actuated, either to induce a controlled deflection or to excite the resonance. This can be achieved with integra ...

2025

Shaped Laser Pulses for Microsecond Time-Resolved Cryo-EM: Outrunning Crystallization during Flash Melting

Marcel Drabbels, Ulrich Lorenz, Constantin Richard Krüger, Nathan Junior Mowry

Water vitrifies if cooled at rates above 3 × 105 K/s. In contrast, when the resulting amorphous ice is flash heated, crystallization occurs even at a more than 10 times higher heating rate, as we have recently shown. This may present an issue for microseco ...

2024

Flash Melting Amorphous Ice

Marcel Drabbels, Ulrich Lorenz, Gabriele Bongiovanni, Constantin Richard Krüger, Nathan Junior Mowry

Water can be vitrified if it is cooled at high rates, which makes it possible to outrun crystallization in so-called no man’s land, a range of deeply supercooled temperatures where water crystallizes rapidly. Here, we study the reverse process in pure wate ...

2024

Decomposition method to evaluate district heating/cooling network potential at urban scale

Ana Catarina Gouveia Braz, François Maréchal, Luc Girardin, Bingqian Liu

In this work, a tool to design district heating networks (DHN) is presented and applied to the city of Lausanne as a case study. The evaluation of the buildings’ heat/cooling demand is performed using a Geographic Information System (GIS) database, built f ...

Associazione Italiana Di Ingegneria Chimica2024

Experiments and gyrokinetic simulations of TCV plasmas with negative triangularity in view of DTT operations

Olivier Sauter, Stefano Coda, Alberto Mariani, Justin Richard Ball, Matteo Vallar, Filippo Bagnato

Negative triangularity (NT) scenarios in TCV have been compared to positive triangularity (PT) scenarios using the same plasma shapes foreseen for divertor tokamak test tokamak operations. The experiments provided a NT/PT L-mode pair and a PT H-mode with d ...

Iop Publishing Ltd2024

Models implemented in the methodological approach to design the initial STEP first wall contour

Kevin Henricus Annemarie Verhaegh, Davide Galassi, Filippo Bagnato, Dario Vaccaro

The official Spherical Tokamak for Energy Production mission aims to demonstrate the ability to generate net electricity from fusion with the STEP Prototype Power plant. One of the key technological and engineering challenges in fusion power plants is mana ...

Elsevier Science Sa2024

Helium plasma operations on ASDEX Upgrade and JET in support of the non-nuclear phases of ITER

Benoît Labit

For its initial operational phase, ITER has until recently considered using non-nuclear hydrogen (H) or helium (He) plasmas to keep nuclear activation at low levels. To this end, the Tokamak Exploitation Task Force of the EUROfusion Consortium carried out ...

IOP Publishing Ltd2024

A Method of Moments Estimator for Interacting Particle Systems and their Mean Field Limit

Andrea Zanoni

We study the problem of learning unknown parameters in stochastic interacting particle systems with polynomial drift, interaction, and diffusion functions from the path of one single particle in the system. Our estimator is obtained by solving a linear sys ...

Siam Publications2024

Disruption avoidance and investigation of the H-Mode density limit in ASDEX Upgrade

Federico Alberto Alfredo Felici, Alessandro Pau

In recent years a strong effort has been made to investigate disruption avoidance schemes in order to aid the development of integrated operational scenarios for ITER. Within the EUROfusion programme the disruptive H-mode density limit (HDL) has been studi ...

Iop Publishing Ltd2024

Power to the People: On the Role of Districts in Decentralized Energy Systems

François Maréchal, Jonas Schnidrig, Cédric Terrier, Arthur Antoine Chuat

Highlights Integration of decentralized models with a centralized national energy system framework. Strategic reduction in photovoltaic (PV) installation requirements and system cost through decentralized approaches. Optimization of self-consumption to min ...

MDPI2024

Multi-machine benchmark of the self-consistent 1D scrape-off layer model DIV1D from stagnation point to target with SOLPS-ITER

Holger Reimerdes

This paper extends a 1D dynamic physics-based model of the scrape-off layer (SOL) plasma, DIV1D, to include the core SOL and possibly a second target. The extended model is benchmarked on 1D mapped SOLPS-ITER simulations to find input settings for DIV1D th ...

Iop Publishing Ltd2024

Influence of Ventilation on Formation and Growth of 1-20 nm Particles via Ozone-Human Chemistry

Dusan Licina, Shen Yang, Marouane Merizak, Meixia Zhang

Ozone reaction with human surfaces is an important source of ultrafine particles indoors. However, 1-20 nm particles generated from ozone-human chemistry, which mark the first step of particle formation and growth, remain understudied. Ventilation and indo ...

Amer Chemical Soc2024

Effects of Hyporheic Exchange and Settlement on the Particle Size Distribution of Colloids

David Andrew Barry, Qihao Jiang

Colloid particle size plays an important role in contaminant adsorption and clogging in the hyporheic zone, but it remains unclear how the particle size changes during the transport of colloids. This study investigated the variation of the particle size of ...

Springer2024

Low-virtuality splitting in the Standard Model

Filippo Nardi

When the available collision energy is much above the mass of the particles involved, scattering amplitudes feature kinematic configurations that are enhanced by the much lower virtuality of some intermediate particle. Such configurations generally factori ...

Springer Nature2024

Performance of energy piles foundation in hot-dominated climate: A case study in Dubai

Lyesse Laloui, Elena Ravera, Sofie Elaine ten Bosch

Energy piles represent an innovative technology that can help provide sustainable geothermal heating or cooling energy for thermal conditioning purposes. In hot-dominated climates, the interest is to inject heat in the ground and extract energy for space-c ...

Pergamon-Elsevier Science Ltd2024

Nanoscale thermal control of a single living cell enabled by diamond heater-thermometer

Aleksandra Radenovic, Evgenii Glushkov

We report a new approach to controllable thermal stimulation of a single living cell and its compartments. The technique is based on the use of a single polycrystalline diamond particle containing silicon-vacancy (SiV) color centers. Due to the presence of ...

Nature Portfolio2023

DeepValve: Development and experimental testing of a Reinforcement Learning control framework for occupant-centric heating in offices

Dolaana Khovalyg, Amirreza Heidari

Space heating controls in offices usually follow static schedules detached from actual occupancy, which results in energy waste by unnecessarily heating vacant offices. The uniqueness of stochastic occupancy profile and thermal response time of each office ...

2023

Impact of Standard versus Tracked-based User Behavior into Energy Simulations of Open-Space Offices

Dolaana Khovalyg, Verena Marie Barthelmes, Arnab Chatterjee

This simulation-based study aimed to contribute to gaining knowledge on how much the deviation between occupant-related input by the national standard and by insitu measurements might impact predictions of heating/cooling needs in offices. Analysis was per ...

2023

Renewable Energy Integration and Waste Heat Recovery for the Production of Sustainable Jet Fuel and Decarbonization of Industrial Heating Applications

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The process synthesis and optimization methods used in this work include simulation of biomass gasification, hydrogen and synthetic natural gas production, and jet fuel production via a Fisher Tropsch unit. An energy integration approach, carried out by th ...

American Institute of Chemical Engineering2023

Temperature and relative humidity in 10 min time resolution measured in the interstitial inlet of the Swiss container during MOSAiC 2019/2020

Julia Schmale, Benjamin Jérémy Laurent Heutte

This dataset contains the temperature and relative humidity in a bypass to the interstitial inlet, measured during the MOSAiC expedition from October 2019 to September 2020. The measurements were performed in the bypass of the interstitial inlet of the Swi ...

Zenodo2023