Publications associées à Design of a Two-Phase Gravity-Driven Micro-Scale Thermosyphon Cooling System for High-Performance Computing Data Centers

Publications associées (18)

Thermal Rectification in Telescopic Nanowires: Impact of Thermal Boundary Resistance

A thermal diode, which, by analogy to its electrical counterpart, rectifies heat current, is the building block for thermal circuits. To realize a thermal diode, we demonstrate thermal rectification in a GaAs telescopic nanowire system using the thermal br ...

2025

Heat transfer in the entrance region of annular laminar flow with constant and different heat flux on two walls

Yasemen Kuddusi

Heat transfer differs in the regions where the flow is developed and developing thermally. These regions can be differentiated by using the thermal entry length. Many researchers have presented correlations to determine the thermal entry length for natural ...

WILEY-V C H VERLAG GMBH2025

A review of thermal management of batteries with a focus on immersion cooling

Weiyu Tang

The performance, cycle life and safety of batteries are strongly influenced by temperature. However, fast charging and discharging can significantly increase heat generation, causing the battery temperature to rise rapidly. Therefore, it is essential to em ...

2025

Small-scale turbopumps for waste heat recovery applications based on an organic Rankine cycle, modeling, analytical and experimental investigations

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

The organic Rankine cycle (ORC) system is considered a promising technology to exploit thermodynamic potential of waste heat. The weight and size of standard pumps can penalize the benefits of installing an ORC system on vehicles. Small-scale ORC applicati ...

EUS Editorial Universidad de Sevilla2024

Self-catalysed frontal polymerisation enables fast and low-energy processing of fibre reinforced polymer composites

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal

Frontal polymerisation has the potential to bring unprecedented reductions in energy demand and process time to produce fibre reinforced polymer composites. Production of epoxy-based fibre reinforced polymer parts with high fibre volume content, commonly e ...

2024

Geodesic Convolutional Neural Network Characterization of Macro-Porous Latent Thermal Energy Storage

Pascal Fua, Sophia Haussener, Pierre Bruno Baqué, Nithin Mallya, Pierre Mathieu Yvernay

High-temperature latent heat thermal energy storage with metallic alloy phase change materials (PCMs) utilize the high latent heat and high thermal conductivity to gain a competitive edge over existing sensible and latent storage technologies. Novel macrop ...

2023

Ultra-Compact Microscale Heat Exchanger for Advanced Thermal Management in Data Centers

John Richard Thome, Filippo Cataldo

This study is focused on the experimental characterization of two-phase heat transfer performance and pressure drops within an ultracompact heat exchanger (UCHE) suitable for electronics cooling applications. In this specific work, the UCHE prototype is an ...

ASME2022

Microchannel cooling for the LHCb VELO Upgrade I

Alessandro Mapelli

The LHCb VELO Upgrade I, currently being installed for the 2022 start of LHC Run 3, uses silicon microchannel coolers with internally circulating bi-phase CO2 for thermal control of hybrid pixel modules operating in vacuum. This is the largest scale applic ...

ELSEVIER2022

Evaluation Criterion of Proton Exchange Membrane (ECPEM) fuel cells considering inserted porous media inside the gas flow channel

Jan Van Herle, Hossein Pourrahmani

The focus of this study is to evaluate the effects of porous media inside the gas flow channel of Proton Exchange Membrane Fuel Cells (PEMFC) on four different output parameters of voltage, power density, pressure drop, and Nusselt number (Nu) considering ...

PERGAMON-ELSEVIER SCIENCE LTD2022

In-situ measurements of the U-value of a ventilated wall assembly

Dolaana Khovalyg, Mohammad Rahiminejad

The walls in a building envelope have the largest contact area with the exterior environment, and, therefore, a considerable portion of the thermal energy can be lost through the walls compared to the other parts of the building envelope. For energy-saving ...

2021

Parallel convection and E × B drifts in the TCV snowflake divertor and their effects on target heat-fluxes

Basil Duval, Davide Galassi, Holger Reimerdes, Joaquim Loizu Cisquella, Cedric Kar-Wai Tsui, Mirko Wensing, Roberto Maurizio

Parallel convection and E × B drifts act together to redistribute heat between the strike-points mechanisms is enhanced near the secondary X-point and is shown to dominate over heat in the low field side snowflake minus (LFS SF−). The cumulative heat conve ...

IOP Publishing Ltd2021

System for co2 capture from internal combustion engine

François Maréchal, Shivom Sharma

System (2) for CO2 capture from a combustion engine (1) comprising an exhaust gas flow circuit (6) having an inlet end fluidly connected to an exhaust of the combustion engine, a heat exchanger circuit (12), a primary exhaust gas heat exchanger (H1) for tr ...

2020

Thermal optimization of shell and tube heat exchanger using porous baffles

Hossein Pourrahmani

In this study, total heat transfer rate and pressure drop along a shell and tube heat exchanger (STHX) with 6 porous baffles are numerically investigated. To study the impacts of segmental porous baffles, three values for the permeability (10(-9) m(2), 10( ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Scale limitations of gas bearing supported turbocompressors for vapor compression cycles

Jürg Alexander Schiffmann

An analysis of single-stage centrifugal compressors supported on dynamic, gas lubricated bearings for driving vapor compression cycles suggests that the maximum feasible compressor power is limited, primarily by the bearing load capacity, in the range from ...

2020

Implementation of Passive Two-Phase Cooling to an Entire Server Rack

John Richard Thome, Filippo Cataldo

As data centers grow exponentially in size and number worldwide, it appears evident that more efficient and reliable cooling solutions are needed to reduce energy consumption and noise level significantly. Thermosyphon-based systems have been proven to res ...

IEEE2020

Shape optimization of segmental porous baffles for enhanced thermo-hydraulic performance of shell-and-tube heat exchanger

Hossein Pourrahmani

This study presents the development and evaluation of a novel shell-and-tube heat exchanger (STHX) design with segmental porous baffles. Computational fluid dynamics (CFD) in combination with machine learning tools are utilized to investigate the thermo-hy ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Combined desiccant-ejector cooling system assisted by Organic Rankine Cycle for zero-power cooling and dehumidification

Dolaana Khovalyg, Amirreza Heidari

This study presents a novel set-up for desiccant-based cooling and dehumidification systems. In this cycle, a solid desiccant and conventional combined cooling and power (CCP) systems, based on the ejector refrigeration cycle (ERC) and the organic Rankine ...

IOP Publishing2019

Reliability of daylight and energy demand evaluations for decision making at the conceptual design stage of neighborhood design

Marilyne Andersen, Luisa Pastore, Minu Agarwal

When conducting building performance simulation (BPS) at the early design stage, potential impact on design decisions is the greatest. However, the reliability of evaluations resulting from early design stage BPS models may suffer given that building attri ...

2019