Publications associées à Preform to produce metallic foam

Publications associées (37)

Constructing multicomponent cluster expansions with machine-learning and chemical embedding

Yann Lorris Müller, Anirudh Raju Natarajan

Cluster expansions are commonly employed as surrogate models to link the electronic structure of an alloy to its finite-temperature properties. Using cluster expansions to model materials with several alloying elements is challenging due to a rapid increas ...

NATURE PORTFOLIO2025

Surface segregation in high-entropy alloys from alchemical machine learning

Michele Ceriotti, Sandip De, Guillaume André Jean Fraux, Arslan Mazitov, Nataliya Lopanitsyna

High-entropy alloys (HEAs), containing several metallic elements in near-equimolar proportions, have long been of interest for their unique mechanical properties. More recently, they have emerged as a promising platform for the development of novel heterog ...

Iop Publishing Ltd2024

Multifunctional Aluminum Pre-treatments from End-Functionalized Phosphonic Acid Self-Assembled Monolayers

Holger Frauenrath, Reuben Yeo Jueyuan, Julian Nicolas Bleich

Aluminum alloys are used in advanced engineering applications as they possess a combination of favorable properties, including high strength, lightweightness, good corrosion resistance, machineability, and recyclability. Such applications often require for ...

2024

Multiscale Porosity Microfluidics to Study Bacterial Transport in Heterogeneous Chemical Landscapes

Francesco Carrara, Jiande Zhou

Microfluidic models are proving to be powerful systems to study fundamental processes in porous media, due to their ability to replicate topologically complex environments while allowing detailed, quantitative observations at the pore scale. Yet, while por ...

Wiley2024

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/ graphite preforms

Ludger Weber, Caroline Hain, Manoj Kondibhau Naikade, Annapaola Parrilli

Porous carbonaceous preforms, made from graphite and silicon carbide (SiC) powders, with varying graphite powder mass fractions and particle sizes, were infiltrated at 1500 degrees C and 1700 degrees C by Si-8 at. pct Zr alloy to produce dense Si-Zr-SiC co ...

ELSEVIER SCI LTD2023

Analysis of accretion disc structure and stability using open code for vertical structure

Pascale Jablonka

Detailed chemical abundances of very metal-poor (VMP; [Fe/H] < -2) stars are important for better understanding the first stars, early star formation, and chemical enrichment of galaxies. Big on-going and coming high-resolution spectroscopic surveys provid ...

OXFORD UNIV PRESS2023

Tuning the reactivity of uranium towards small molecules in multimetallic complexes

Nadir Jori

One of the main goals of organometallic chemistry in the last decades was the activation of small molecule in mild reaction conditions. Even though multiple examples of catalytic cycles able to produce fine chemicals from cheap and abundant sources using t ...

EPFL2023

Modelling of metal alloys in realistic conditions with machine learning

Nataliya Lopanitsyna

Computer simulations based on statistical methods have emerged as a powerful tool for studying structure-property relationships at the atomistic level. However, to provide reliable insights into materials in realistic conditions, it is essential to accurat ...

EPFL2023

Micromechanics of oxide inclusions in ferrous alloys

Alejandra Inés Slagter

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Wear behaviour of novel copper alloy as an alternative to copper-beryllium

Roland Logé, Stefano Mischler, Anna Neus Igual Muñoz, Baptiste Thomas Jean Rouxel

Copper beryllium age hardenable alloys (Cu-Be) are widely used and appreciated for combining exceptional mechanical and electrical properties. However, the toxicity of these alloys pushes the scientific community to develop alternative alloys. Cu-Ni-Sn all ...

ELSEVIER SCIENCE SA2023

Modeling high-entropy transition metal alloys with alchemical compression

Michele Ceriotti, Sandip De, Guillaume André Jean Fraux, Nataliya Lopanitsyna

Alloys composed of several elements in roughly equimolar composition, often referred to as high-entropy alloys, have long been of interest for their thermodynamics and peculiar mechanical properties, and more recently for their potential application in cat ...

AMER PHYSICAL SOC2023

Layered metals as polarized transparent conductors

Philip Johannes Walter Moll, Matthias Carsten Putzke, Chunyu Guo

The quest to improve transparent conductors balances two key goals: increasing electrical conductivity and increasing optical transparency. To improve both simultaneously is hindered by the physical limitation that good metals with high electrical conducti ...

Nature Portfolio2023

Global, Passive Detection of Connection Tampering

Louis-Henri Manuel Jakob Merino

In-network devices around the world monitor and tamper with connections for many reasons, including intrusion prevention, combating spam or phishing, and country-level censorship. Connection tampering seeks to block access to specific domain names or keywo ...

Assoc Computing Machinery2023

Modeling the mechanics and rheology of porous and granular media: an elastoplastic continuum approach

Lars Kristoffer Uhlen Blatny

The complex mechanics of porous and granular media play a significant role in various industrial processes and natural phenomena. As an example, understanding the mechanics of how failure occurs, localizes and propagates in porous brittle solids under vari ...

EPFL2023

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part II: Experimental verification of modelling approaches by infiltration of Si-Zr alloy into idealized microchannels

Ludger Weber, Caroline Hain, Manoj Kondibhau Naikade

In this work, the mechanisms leading to the pore closure in reactive melt infiltration (RMI) of carbon by pure silicon and a near eutectic Si-8 at-pct Zr alloy at 1500 and 1700 degrees C under vacuum were studied. Various geometrical configurations of micr ...

ELSEVIER SCI LTD2022

Galvanic replacement reactions of Ga and In with Cu for the synthesis of bimetallic nanoparticles

Laia Castilla Amorós

The need for efficient and selective catalysts, capable of driving important conversions to build a more sustainable society, encourages the development of synthetic approaches towards new nanomaterials. Cu-based bimetallic nanoparticles (NPs) promise to f ...

EPFL2022

Atomic doping & coating for Electrocatalysis & Li-ion batteries

Albert Claude Jean-Pierre Daubry

Molybdenum atomic-doping on bio-waste derived nitrogen-doped conductive carbon electrocatalyst was synthesized and investigated for the dinitrogen reduction to ammonia in alkaline media. The assessment of the catalytic activity was found to be non-trivial ...

EPFL2022

Mapping Catalyst‐Solvent Interplay in Competing Carboamination/Cyclopropanation Reactions

Anne-Clémence Corminboeuf, Nicolai Cramer, Matthew Wodrich, Simone Gallarati, Lukasz Piotr Wozniak, Miyeon Chang

Group 9 metals, in particular Rh III complexes with cyclopentadienyl ligands, are competent C–H activation catalysts. Recently, a Cp*Rh III catalyzed reaction of alkenes with N -enoxyphthalimides showed divergent outcome based on the solvent, with carboami ...

2022

A Low-Temperature Annealing Method for Alloy Nanostructures and Metasurfaces: Unlocking a Novel Degree of Freedom

Olivier Martin, Christian Santschi, Hsiang-Chu Wang, Jeonghyeon Kim, Debdatta Ray

The material and exact shape of a nanostructure determine its optical response, which is especially strong for plasmonic metals. Unfortunately, only a few plasmonic metals are available, which limits the spectral range where these strong optical effects ca ...

Wiley-V C H Verlag Gmbh2022