Publications associées à Design and Optimization of a Low Power and Fast Response Viscometer Used for Determination of the Natural Gas Wobbe Index

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Thomas Maeder, Jürgen Brugger, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Frequency response of fiber reinforced DEAs

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Stefania Maria Aliki Konstantinidi, Markus Koenigsdorff

Dielectric Elastomer Actuators (DEAs) have emerged as versatile and promising devices for a multitude of applications, including soft robotics, haptic interfaces, and artificial muscles. DEAs are an interesting soft actuator technology due to their high en ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Multi-gas processing and transport system

François Maréchal

A gas processing and transport system comprising a natural gas pipeline (1), a plurality of gas conditioning stations (4) connected to the natural gas pipeline between an upstream main natural gas supply and a downstream consumer end, the gas processing st ...

2024

Design and Evaluation of Modular Gas and Wind Sensing Nodes for Static and Mobile Deployments

Alcherio Martinoli, Emmanuel Droz, Wanting Jin

Static and mobile sensor nodes can be employed in gas monitoring tasks to detect gas leaks in an early stage and localize gas sources. Due to the intermittent nature of gas plumes and the slow dynamics of commonly used gas sensors, measuring gas concentrat ...

2024

Optically responsive dry cholesteric liquid crystal marbles

Dry liquid crystal marbles are structures that consist of cholesteric liquid crystal (CLC) droplets prepared by the mixture of chiral-doped thermotropic LCs encapsulated by cellulose nanocrystals (CNCs) that have been dried under ambient conditions. The ch ...

Academic Press Inc Elsevier Science2024

Characterization of a flexible a-Si:H detector for in vivo dosimetry in therapeutic x-ray beams

Sylvain Dunand, Nicolas Würsch, Jonathan Emanuel Thomet, Luca Massimiliano Antognini, Matthew James Large

BackgroundThe increasing use of complex and high dose-rate treatments in radiation therapy necessitates advanced detectors to provide accurate dosimetry. Rather than relying on pre-treatment quality assurance (QA) measurements alone, many countries are now ...

Wiley2024

Data-Driven Control Synthesis using Koopman Operator: A Robust Approach

Alireza Karimi, Mert Eyuboglu, Nathan Russell Powell

This paper proposes a data-driven control design method for nonlinear systems that builds upon the Koopman operator framework. In particular, the Koopman operator is used to lift the nonlinear dynamics to a higher-dimensional space where the so-called obse ...

2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos, Réginald Germanier

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

Associazione Italiana Di Ingegneria Chimica2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Humidity-insensitive optical fibers for distributed sensing applications

Luc Thévenaz, Tiago Filipe Pimentel Das Neves

Humidity is a critical environmental factor in various applications, and its temperature dependence must be considered when developing thermo-hygrometer fiber sensors. The optical fibers that constitute the sensor must have a temperature reference, which s ...

2023

MALTA-Cz: a radiation hard full-size monolithic CMOS sensor with small electrodes on high-resistivity Czochralski substrate

Edoardo Charbon, Ashish Sharma, Francesco Piro

Depleted Monolithic Active Pixel Sensor (DMAPS) sensors developed in the Tower Semiconductor 180 nm CMOS imaging process have been designed in the context of the ATLAS ITk upgrade Phase-II at the HL-LHC and for future collider experiments. The "MALTA-Czoch ...

Iop Publishing Ltd2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

Printed ecoresorbable temperature sensors for environmental monitoring

Danick Briand, James Alec Pierce Bourely, Nicolas Francis Fumeaux, Melissa Kossairi

Electronic waste has become a pressing issue, necessitating sustainable solutions for the disposal of electronic devices. While the development of environmentally degradable electronics has gained attention, the fabrication of stable and performant sensors ...

2023

Heat pumping and renewable energy integration for decarbonizing brewery industry and district heating

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The energy integration of brewery plants and urban agglomerations has many benefits in terms of rational energy use and reduced environmental impact, especially during scenarios of uncertain supply chain and volatile market prices. In fact, the diversifica ...

Elsevier2023

Achieving Optimal Performance With Data-Driven Frequency-Based Control Synthesis Methods

Alireza Karimi, Philippe Louis Schuchert

Frequency Response Function (FRF)-based control synthesis methods for Linear Time-Invariant (LTI) systems have been widely used in control theory and industry. Recently, there has been renewed interest in these methods, employing numerical optimization too ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

Hybridisation Scenarios of Solid Oxide Fuel Cells, Batteries, and Internal Combustion Engines for Waterborne Transportation

François Maréchal, Daniel Alexander Florez Orrego

The shipping industry was responsible for about 3% of global greenhouse gas (GHG) emissions in 2018. In this context, the International Maritime Organisation (IMO) has established stringent targets to reduce GHG emissions by at least 50% by 2050 compared t ...

Universidad de Las Palmas de Gran Canaria2023

Comparative Exergy and Economic Assessment of Fossil and Biomass-Based Routes for Ammonia Production

François Maréchal, Daniel Alexander Florez Orrego

Due to the increasing concerns about the marked dependence on fossil resources and their intrinsic economic uncertainty, as well as motivated by more stringent environmental regulations, the pursuit of alternative energy resources for the synthetic fertili ...

Silesian University of Technology2023

A systemic study for enhanced waste heat recovery and renewable energy integration towards decarbonizing the aluminium industry

François Maréchal, Daniel Alexander Florez Orrego, Réginald Germanier

The aluminium remelting industry relies on natural gas to transform recycled aluminium into aluminium feedstock, entailing significant atmospheric emissions. Hydric resources are also affected as they are used as sinks of waste heat from the casting proces ...

2023