Publications associées à Redox melts formed by copper (i)/(ii) complexes as charge transfer and charge storage materials

Publications associées (38)

Electrolyte effects and stability of Zn/Li dual-ion batteries with water-in-salt electrolytes

Nikolaos Kakavas, Michael Graetzel, Ladislav Kavan, Felix Thomas Eickemeyer, Jiaqi Xu, Wenzhe Niu

Aqueous zinc-ion batteries have emerged as promising candidates for safe and cost-effective energy storage, yet their performance remains constrained by electrode stability and electrolyte composition. In this study, we investigate the electrochemical beha ...

2025

A review of thermal management of batteries with a focus on immersion cooling

Weiyu Tang

The performance, cycle life and safety of batteries are strongly influenced by temperature. However, fast charging and discharging can significantly increase heat generation, causing the battery temperature to rise rapidly. Therefore, it is essential to em ...

2025

Niobium oxide anode materials with suppressed activity toward hydrogen evolution reaction for aqueous batteries

Corsin Battaglia

The hydrogen evolution reaction is the most prominent parasitic reaction for aqueous battery chemistries. Although water-in-salt electrolytes show greatly enhanced electrochemical stability, increasing the voltage of aqueous batteries further by lowering t ...

ELSEVIER2024

Stabilization versus competing de-metalation, trans-metalation and (cyclo)-dehydrogenation of Pd porphyrins at a copper surface

Francesco Armillotta

Metal-porphyrins are studied intensively due their potential applications, deriving from the variety of electronic and chemical properties, tunable by selecting metal centers and functional groups. Metalation, de- and trans-metalation processes are fundame ...

Royal Soc Chemistry2024

Additive Fabrication of Microsupercapacitors

Amin Hodaei

Microsupercapacitors (with footprints from -mm up to -cm scale) have attracted attention for use as electrochemical energy storage devices to power wearables, IoT, and other small microsystems due to their high power density, excellent charge/discharge rev ...

EPFL2023

Development of a magnetic calcium-alginate hydrogel-sphere encapsulated with Fe-Mn-Zr ternary metal composite for heavy metal adsorption

Xinyi Huang

Heavy metal contamination has become one of the greatest global environmental problems. In this study, a magnetic calcium-alginate hydrogel-sphere encapsulated with Fe-Mn-Zr ternary-metal composite (MCHETC) was prepared through a combined co-precipitation ...

2023

Can dd excitations mediate pairing?

Francesco Barantani, Christophe Berthod

The Cu-3d states in the high-T-c cuprates are often described as a single band of 3d(x2-y2) states, with the other four 3d states having about 2 to 3 eV higher energy due to the lower-than-octahedral crystal field at the copper sites. However, excitations ...

Elsevier2023

A versatile platform for graphene nanoribbon synthesis, electronic decoupling, and spin polarized measurements

Donat Fabian Natterer, Johannes Schwenk

The on-surface synthesis of nano-graphenes has led the charge in prototyping structures with perspectives beyond silicon-based technology. Following reports of open-shell systems in graphene-nanoribbons (GNRs), a flurry of research activity was directed at ...

ROYAL SOC CHEMISTRY2023

Experimental study of stability, quench propagation and detection methods on 15 kA sub-scale HTS fusion conductors in SULTAN

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy, Ortensia Dicuonzo

High-temperature superconductors (HTSs) enable exclusive operating conditions for fusion magnets, boosting their performance up to 20 T generated magnetic fields in the temperature range from 4 K to 20 K. One of the main technological issues of HTS conduct ...

IOP Publishing Ltd2023

Redox dual-flow battery for combined electricity storage and hydrogen production

Danick Reynard

The energy transition towards a carbon-neutral and sustainable economy is one of the greatest challenges of the 21st century to combat global warming and pollution. The decarbonization process is affecting every sector of the economy (electricity, transpor ...

EPFL2022

Active sites on copper-based catalysts for electrochemical CO2 reduction selectively to C2+ products

Jie Zhang

Electrochemical CO2 reduction (eCO2RR) towards value-added chemicals, powered by renewable electricity, is a promising technology for storing the intermittent renewable energy in the form of chemical bonds. Among the various products of eCO2RR, multi-carbo ...

EPFL2022

Solar reduction of carbon dioxide on copper-tin electrocatalysts with energy conversion efficiency near 20%

Michael Graetzel, Shaik Mohammed Zakeeruddin, Yuhang Liu, Dan Ren, Jing Gao, Jun Li, Meng Xia

Solar-driven carbon dioxide reduction has witnessed a renaissance in the past decades, but the system suffers from low reaction rates. Here the authors develop a copper/tin-oxide electrocatalyst, achieving a new benchmark solar-to-CO energy conversion effi ...

Nature Portfolio2022

Radiation enhanced oxidation of proton-irradiated copper thin-films: Towards a new concept of ultra-high radiation dosimetry

Jean-Michel Sallese, Didier Bouvet, Georgi Gorine

The effects of extreme radiation levels on the electrical resistivity of metal thin films made of copper were studied by means of electrical measurements and post irradiation imaging. Different 3x3 mm(2) chips were produced by depositing 500 nm of meander ...

2019

Dual-function engineering to construct ultra-stable anodes for potassium-ion hybrid capacitors: N, O-doped porous carbon spheres

Kangning Zhao, Yanan Chen

Heteroatom doping engineering is deemed to be an adoptable strategy to boost the potassium (K) storage performance of carbonaceous materials. The inevitable issue for this strategy lies in the huge volume expansion originated from the large radius of K+. I ...

Elsevier2022

Overcritical Current Resistivity of YBCO-Coated Conductors Through Combination of PCM and Finite-Element Analysis

Bertrand Dutoit, Bertrand Dutoit, Francesco Grilli, Nicolo' Riva

Understanding the electro-thermal behavior of high-temperature superconductor (HTS) materials is a critical aspect for designing efficient and reliable applications. In order to optimize cost and performance, one needs to understand the role played by the ...

IEEE Institute of Electrical and Electronics Engineers2019

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Copper Bipyridyl Redox Mediators for High Performance Dye-Sensitized Solar Cells

Yasemin Saygili

Photovoltaic (PV) technologies attract a lot of attention as a result of the increasing energy demand and environmental concerns stemming from the conventional energy resources. Accordingly, the power conversion efficiency (PCE) values of various solar ene ...

EPFL2019

Effect of Coordination Sphere Geometry of Copper Redox Mediators on Regeneration and Recombination Behavior in Dye-Sensitized Solar Cell Applications

Ulf Anders Hagfeldt, Shaik Mohammed Zakeeruddin, Jacques-Edouard Moser, Joël Teuscher, Fabrizio Giordano, Marina Freitag, Yasemin Saygili, Marko Stojanovic

The recombination of injected electrons with oxidized redox species and regeneration behavior of copper redox mediators are investigated for four copper complexes, [Cu(dmby)2]2+/1+ (dmby = 6,6′-dimethyl-2,2′- bipyridine), [Cu(tmby)2]2+/1+ (tmby = 4,4′,6,6′ ...

2018

Defect formation and mitigation during laser powder bed fusion of copper

Carl Tore Viktor Lindström

Additive manufacturing (AM) is a group of processing technologies which has the potential to revolutionize manufacturing by allowing easy manufacturing of complex shapes and small series. One AM-method which is of high interest for processing of metals is ...

EPFL2021

Copper-Catalyzed Arylation of Remote C(sp3 )−H Bonds in Carboxamides and Sulfonamides

Qian Wang, Jieping Zhu, Zhaodong Li

Reported herein is an unprecedented copper-catalyzed arylation of remote C(sp3)-H bonds. Stirring a trifluorotoluene solution of either N fluorocarboxamides or N-fluorosulfonamides and arylboronic acids in the presence of a catalytic amount of copper(II) t ...

Wiley-VCH Verlag GmbH2018