Publications associées à Broadband plasmonic-organic terahertz field sensor on a silicon-on-insulator platform

Publications associées (26)

Tuning Electronic and Optical Properties of 2D/3D Interfaces of Hybrid Perovskites through Interfacial Charge Transfer: Prediction of Higher-Efficiency Interface Solar Cells Using Hybrid-DFT Methods

The 2D/3D or 2D/quasi-2D composite mixed-dimensional construction of hybrid perovskite interfaces is gaining increasing attention due to their enhanced stability toward degradation without compromising the corresponding solar cell efficiency. Much of this ...

AMER CHEMICAL SOC2025

Buried Hole-selective Interface Engineering for High-efficiency Tin-lead Perovskite Solar Cells with Enhanced Interfacial Chemical Stability

Guixiang Li

Mixed Sn-Pb perovskites are attracting significant attention due to their narrow bandgap and consequent potential for all-perovskite tandem solar cells. However, the conventional hole transport materials can lead to band misalignment or induce degradation ...

ELSEVIER2025

Towards microwave-to-optical quantum transduction with barium titanate/strontium titanate integrated photonics

Annina Irina Riedhauser

The faithful bidirectional quantum coherent conversion of microwave (5 GHz) and optical (193.5 THz) quantum states will become essential for future quantum networks. Due to their low transition frequency, qubit states are quickly destroyed at room temperat ...

EPFL2025

Fiber-Coupled Absorption-based Quantum Sensing with Nitrogen Vacancy Ensembles in a Suspended Diamond Photonic Cavity

Darin Ali Naushad Merchant, Christophe Marcel Georges Galland, Amirali Arabmoheghi, Claudio Alejandro Jaramillo Concha, Yuchun Zhu

Low photon extraction efficiency limits the optical spin readout fidelity in emerging quantum sensing technologies in diamond. Here, we propose and fabricate integrated diamond nanoprobes based on cavity-enhanced IR absorption of embedded Nitrogen Vacancy ...

IEEE Computer Society2024

Anomalous Electroluminescence Characteristics of Perovskite Modules

Mohammad Khaja Nazeeruddin, Paul Joseph Dyson

Spatially resolved photoluminescence (PL) and electroluminescence (EL) imaging technologies play a crucial role in evaluating the performance and stability of photovoltaic devices. However, their application in perovskite devices presents unique challenges ...

2024

Electric-field poling of a silicon nitride microring resonator for linear electro-optic modulation

Camille Sophie Brès, Edgars Nitiss, Boris Zabelich, Christian André Clément Lafforgue

The centrosymmetric structure of stoichiometric silicon nitride inhibits the realization of second-order nonlinear processes in this low-loss, complementary-metal-oxide-semiconductor fabrication-compatible platform. Nevertheless, linear electro-optic modul ...

SPIE2024

All-SnO2-Based Conformal Electron Transport Layer for Efficient Perovskite Solar Cells

Likai Zheng

The fabrication of high-performance perovskite solar cells on high-haze fluorine-doped tin oxide (FTO) substrates with superior light-trapping capabilities necessitates a highly conformal electron transport layer at the bottom interface. Herein, a conforma ...

2024

Integration of Metal Meshes as Transparent Conducting Electrodes into Perovskite Solar Cells

Andreas Schueler, Jérémy Jacques Antonin Fleury, René Uwe Schneider, Jakob Heier, Chiara Ongaro

As the demand for photovoltaic technologies continues to grow, the quest for efficient and sustainable transparent conducting electrodes (TCEs) rapidly rises. Traditional solutions, such as indium tin oxide (ITO), face challenges related to indium scarcity ...

Wiley2024

Best practices in measuring absorption at the macro- and microscale

Giulia Tagliabue, Alan Richard Bowman, Fateme Kiani Shahvandi, Jiaming Ma, German Garcia Martinez

The fraction of light absorbed in a material is a key parameter for a wide range of optoelectronic and energy devices, including solar cells, light emitting diodes, and photo(electro)chemical devices. It can reveal detailed performance information and esta ...

2024

Synergistic Redox Modulation for High-Performance Nickel Oxide-Based Inverted Perovskite Solar Modules

Mohammad Khaja Nazeeruddin, Bin Ding, Xianfu Zhang

Nickel oxide (NiOx)-based inverted perovskite solar cells stand as promising candidates for advancing perovskite photovoltaics towards commercialization, leveraging their remarkable stability, scalability, and cost-effectiveness. However, the interfacial r ...

Wiley2024

Infrared-reflective ultrathin-metal-film-based transparent electrode with ultralow optical loss for high efficiency in solar cells

Michael Graetzel, Georgios Kakavelakis

In this work we study in-depth the antireflection and filtering properties of ultrathin-metal-film-based transparent electrodes (MTEs) integrated in thin-film solar cells. Based on numerical optimization of the MTE design and the experimental characterizat ...

Nature Portfolio2024

Travelling-Wave Optical Parametric Amplification in Gallium Phosphide Integrated Waveguides

Tobias Kippenberg, Johann Emmeram Riemensberger, Mikhail Churaev, Nikolai Kuznetsov, Alisa Davydova, Alberto Nardi

We demonstrate integrated optical continuous-travelling-wave parametric amplifiers that significantly surpass the amplification bandwidth of traditional Erbium-Doped Fiber Amplifiers. Using a 5.55-cm-long integrated gallium phosphide waveguide, we achieve ...

SPIE2024

UV, visible and near-infrared light generation through cascaded nonlinear processes in silicon-nitride microring resonators pumped at telecom wavelength

Tobias Kippenberg, Camille Sophie Brès, Junqiu Liu, Marco Clementi, Boris Zabelich, Samantha Sbarra

On-chip coherent light generation has wide-ranging applications in metrology, spectroscopy, quantum optics, etc. In this study, we demonstrate the generation of coherent light from a silicon-nitride microring resonator using cascaded nonlinear processes. T ...

SPIE2024

Quasi-Planar Core Based Spiro-Type Hole-Transporting Material for Dopant-Free Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Jianxing Xia

Hole-transporting material (HTMs) are crucial for obtaining the stability and high efficiency of perovskite solar cells (PSCs). However, the current state-of-the-art n-i-p PSCs relied on the use of 2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenylamine)-9,9′-spiro ...

Wiley-VCH Verlag GmbH2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024

Silicon nitride waveguide or photonic integrated circuit fabrication method

Tobias Kippenberg, Xinru Ji

Silicon nitride waveguide fabrication method including providing a substrate including a stress release trench structure, the stress release recess structure being formed in a silicon oxide layer, depositing a silicon nitride material or layer onto the sil ...

2024

Combined Vacuum Evaporation and Solution Process for High-Efficiency Large-Area Perovskite Solar Cells with Exceptional Reproducibility

Michael Graetzel

Organic-inorganic hybrid perovskites exhibit outstanding performances in perovskite solar cells (PSCs). However, the complex solution chemistry of perovskites precursors renders it difficult to prepare large-area devices in a reproducible way, which is a p ...

Wiley-V C H Verlag Gmbh2023

Single-crystalline TiO2 nanoparticles for stable and efficient perovskite modules

Mohammad Khaja Nazeeruddin, Paul Joseph Dyson, Hiroyuki Kanda, Bin Ding, Wen Luo, Yong Ding, Keith Gregory Brooks, Valentin Ianis Emmanuel Queloz, Yen-Cheng Liu

The incorporation of electron transport layers based on single-crystalline TiO2 rhombohedral nanoparticles enables the realization of stable and efficient large-area perovskite solar cell modules. ...

Nature Portfolio2022

Nanoscale Study of the Hole-Selective Passivating Contacts with High Thermal Budget Using C-AFM Tomography

Christophe Ballif, Franz-Josef Haug, Quentin Thomas Jeangros, Gizem Nogay, Philipp Friedrich Hermann Löper, Martin Ledinsky

We investigate hole-selective passivating contacts that consist of an interfacial layer of silicon oxide (SiOx) and a layer of boron-doped SiCx(p). The fabrication process of these contacts involves an annealing step at temperatures above 750 degrees C whi ...

AMER CHEMICAL SOC2021

New approaches in component design for dye-sensitized solar cells

Ulf Anders Hagfeldt, Nikolaos Vlachopoulos

The present perspective presents a number of issues related to the current direction of DSSC research, with emphasis on the transition from iodide-containing electrolyte to charge-transport media (CTMs), electrolytes or solid-state conductors based on inor ...

ROYAL SOC CHEMISTRY2021