Publications associées à Computational Study on the Electrical Behavior of Silicon Nanowire Memristive Biosensors

A modular multiple frequency inductive link to wirelessly power multiple miniaturized implants

Sandro Carrara, Diego Ghezzi, Gian Luca Barbruni

A modular multiple frequency coils inductive link system to wirelessly provide power for at least a medical implant at an output of a receiving coil, whereby the receiving coil is configured to be implanted in an organism. The modular multiple frequency co ...

2024

A Front-End CMOS Interface Circuit With High Voltage Charge Pump and Oscillator for Capacitive Micromachined Ultrasonic Transducers

Sandro Carrara, Zhengwen Jiang, Gian Luca Barbruni, Yihe Zhao

Label-free biosensors, combined with miniaturized micro-electromechanical sensory platforms, offer an attractive solution for real-time and facile monitoring of biomolecules due to their high sensitivity and selectivity without the need for specifically la ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

AC loss and electrical resistance of the RW3 diffusion-bonded joint

Vincenzo D'Auria

For the European DEMO fusion reactor, several options of the Toroidal Field (TF) coil design were proposed. The winding of the TF coil option 1 is based on React&Wind (RW), Nb3Sn, graded conductors in order to optimize the amount of superconductor accordin ...

2023

On Energy Control of Modular Multilevel Converters

Milan Utvic

Owing to the advancements in the area of power electronics, efficient and flexible ac to dc conversion is made possible, bringing back into focus the idea of the dc power transmission at various voltage levels. Several technical and economical factors advo ...

EPFL2023

Experimental study of stability, quench propagation and detection methods on 15 kA sub-scale HTS fusion conductors in SULTAN

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy, Ortensia Dicuonzo

High-temperature superconductors (HTSs) enable exclusive operating conditions for fusion magnets, boosting their performance up to 20 T generated magnetic fields in the temperature range from 4 K to 20 K. One of the main technological issues of HTS conduct ...

2023

Understanding and mitigating resistive losses in fired passivating contacts: role of the interfaces and optimization of the thermal budget

Christophe Ballif, Aïcha Hessler-Wyser, Franz-Josef Haug, Luca Massimiliano Antognini, Julien Hurni, Ezgi Genç, Sofia Libraro, Audrey Marie Isabelle Morisset

This work presents a study of p-type passivating contacts based on SiCx formed via a rapid thermal processing (RTP) step, using conditions compatible with the firing used to sinter screen-printed metallization pastes in industry. The contributions of the t ...

Elsevier2023

Deep defects in InGaN LEDs: modeling the impact on the electrical characteristics

Jean-François Carlin, Nicolas Grandjean, Camille Haller

Deep defects have a fundamental role in determining the electro-optical characteristics and in the efficiency of InGaN light-emitting diodes (LEDs). However, modeling their effect on the electrical characteristics of the LED is not straightforward. ...

SPIE-INT SOC OPTICAL ENGINEERING2022

Modeling the electrical characteristic of InGaN/GaN blue-violet LED structure under electrical stress

Jean-François Carlin, Nicolas Grandjean, Camille Haller

The role of deep defects and their physical origin in InGaN/GaN LED are still widely investigated and debated, in particular their impact on the electrical and optical characteristics and on the reliability of the device. In this paper we evaluate the elec ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Diffusion-Bonding Between Strands and Modeling of Splices of Nb3Sn Rutherford Cables

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy

Particle accelerators foresee the use of Nb3Sn in the next generation of dipole magnets. A common design strategy is to grade the coil, i.e., to optimize the quantity of superconductor in the turns with respect to the magnetic field intensity. As a consequ ...

IEEE Institute of Electrical and Electronics Engineers2022

Inductive Power Transfer System for Auxiliary Power Supply in Medium Voltage Converters

Drazen Dujic, Xiaotong Du, Chengmin Li

Inductive power transfer technology is an attractive solution for medium voltage applications by eliminating the need for high voltage cables or wired connections in general. This paper introduces an inductive power transfer system which has multiple indep ...

2022

New Technologies to Enhance the Figures-of-Merit of GaN Power Devices

Luca Nela

Gallium Nitride (GaN) has enabled groundbreaking developments in the field of optoelectronics and radio frequency communication. More recently, GaN devices for power conversion applications have demonstrated excellent potential. Thanks to Gallium Nitride w ...

EPFL2022

Preliminary Design of a High Current R&W TF Coil Conductor for the EU DEMO

Pierluigi Bruzzone, Kamil Sedlák, Federica Demattè

Paschen failures in ITER, W7-X and JT60 superconducting coils at the acceptance tests have shown that it is highly desirable to lower the coil discharge voltage (U-d) of the DEMO Toroidal Field (TF) coils. Another benefit of lowering the U-d might be the r ...

IEEE Institute of Electrical and Electronics Engineers2022

Electron Emission Regimes of Planar Nano Vacuum Emitters

Marco Turchetti, Alberto Nardi, Yujia Yang

Recent advancements in nanofabrication have enabled the creation of vacuum electronic devices with nanoscale free-space gaps. These nanoelectronic devices promise the benefits of cold-field emission and transport through free space, such as high nonlineari ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Surface Susceptibilities as Characteristic Models of Reflective Metasurfaces

Karim Achouri, Shourya Dutta Gupta, Ville Tuovi Tiukuvaara

While metasurfaces (MSs) are constructed from deeply subwavelength unit cells, they are generally electrically large and full-wave simulations of the complete structure are computationally expensive. Thus, to reduce this high computational cost, nonuniform ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Intergrade Joints for Nb3Sn cables of high magnetic field magnets

Vincenzo D'Auria

The objective of this thesis is the development of high-field and high-current joints between Nb3Sn cables for superconducting coils. The main fields of application are high energy physics (HEP) and thermonuclear fusion. In this thesis, the focus is on Win ...

EPFL2022

High frequency IGCT operation for DC transformer

Gabriele Ulissi

In spite of the dominance of ac technology for the vast majority of power transmission and distribution since the late 19th century, the past decades have seen an increase in use of dc electrical power. In particular, this has been the case both in high vo ...

EPFL2022

Some Results of the EU Project FASTGRID

Manuel Bauer

The EU FASTGRID project aimed at improving the REBCO conductor in order to enhance its economical attractiveness for the Superconducting Fault Current Limiter (SFCL). Two approaches were simultaneously investigated: i) the reduction of the tape length thro ...

IEEE Institute of Electrical and Electronics Engineers2022

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Thermodynamics of organic electrochemical transistors

Hsin Tseng, Matteo Cucchi

Though models describing the operating mechanism of organic electrochemical transistors (OECTs) have been developed, these models are unable to accurately reproduce OECT electrical characteristics. Here, the authors report a thermodynamic-based framework t ...

Nature Portfolio2022

Electrical Model of a Wireless mW-Power and Mbps-Data Transfer System Over a Single Pair of Coils

Alexandre Schmid, David Palomeque Mangut

This paper proposes a system to transfer both mW-power and Mbps-data over an inductive link using a single pair of coils. The system is able to handle a wide range of loads by implementing a load adapter block that divides the operation into two phases: a ...

IEEE2022