Publications associées à Characterization of Austenitic Stainless Steels with Regard to Environmentally Assisted Fatigue in Simulated Light Water Reactor Conditions

Publications associées (22)

Influence of sulphur content on the hot deformation behaviour and constitutive description of Cu-DHP alloy

The effect of sulphur content on the hot working behaviour of Cu-DHP alloy was investigated by hot compression testing. It was revealed that sulphur increases the flow stress, as critically discussed based on the constitutive analysis, leading to reliable ...

TAYLOR & FRANCIS LTD2025

Effects of beam shaping on copper-steel interfaces in multi-material laser beam powder bed fusion

Seyed Amirmohammad Jamili

Multi-material laser beam powder bed fusion (PBF-LB) is a promising approach to meet industrial demands for multifunctional components, due to its enhanced freedom of design. Copper and stainless steel are interesting materials to be combined due to the hi ...

Elsevier Science Sa2024

The Effect of Rivers on Energy Balance at the Neighborhood Scale. A comparative analysis of four Rhodanian sites in France and Switzerland

Emmanuel Rey, Sergi Aguacil Moreno, Martine Laprise, Sara Sonia Formery Regazzoni

This research aims to compare the greenhouse gas (GHG) emissions of new neighbourhood projects near the Rhône River in France and Switzerland. The study considers the influence of the river on energy demand and resilience to climate change of 12 project-ba ...

Wrocław University of Science and Technology Publishing House2024

On the slip burst amplitude cutoff in dislocation-rich microcrystals

Andreas Mortensen, Luciano Borasi

The plastic deformation of small-scale face-centered cubic metals exhibits intermittent slip burst events that appear on stress-strain curves as sudden strain jumps and/or load drops. These events are generally attributed to the avalanche-like cooperative ...

Pergamon-Elsevier Science Ltd2023

Atlas Narratives of Anthropogenic Transformations across the Vietnamese Mekong Delta's Urban-Rural Territories: Water Ecosystems as Subject for the Social Ecological Transition

Sylvie Tram Nguyen

Well beyond the impact of climate change, anthropogenic modifications of the Vietnam Mekong Delta's ecosystems have resulted in environmental degradation and subsequent loss in ecosystems. The environmental impacts include but are not limited to accelerate ...

EPFL2023

High throughput synthesis enabled exploration of CoCrFeNi-based high entropy alloys

William Curtin, Xiao Zhou

To accelerate the exploration, screening, and discovery of structural high-entropy alloys with targeted properties, the newly developed High-Throughput Hot-Isostatic-Pressing based Micro-Synthesis Approach (HT-HIP-MSA) is employed to efficiently synthesize ...

JOURNAL MATER SCI TECHNOL2022

An investigation on reorientation and textural evolution in a martensitic NiTi rolled sheet using EBSD

Roland Logé, Cyril Cayron, Junfeng Xiao

Variant reorientation is a ubiquitous phenomenon in shape memory alloys and has a great influence on their texture and mechanical response. In the present study, a martensitic NiTi rolled sheet is investigated by the electron backscattering diffraction (EB ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Deformation twinning mechanism in magnesium at the microscale: strain rate, temperature and orientation effects

Nicolò Maria Della Ventura

The project aims to validate some recent theoretical developments on the deformation twinning nucleation mechanism in HCP metals through small-scale mechanic experiments. To this end, a systematic investigation of the mechanical response of pure magnesium ...

EPFL2022

Effect of Solute-Solute Interactions on Strengthening of Random Alloys from Dilute to High Entropy Alloys (vol 200, pg 659, 2020)

William Curtin, Shankha Nag

PERGAMON-ELSEVIER SCIENCE LTD2021

Additive Manufacturing of Bulk Metallic Glasses-Process, Challenges and Properties: A Review

Roland Logé, Jamasp Jhabvala, Navid Sohrabi

Bulk Metallic Glasses (BMG) are metallic alloys that have the ability to solidify in an amorphous state. BMGs show enhanced properties, for instance, high hardness, strength, and excellent corrosion and wear resistance. BMGs produced by conventional method ...

MDPI2021

Concrete compressive strength: From material characterization to a structural value

Aurelio Muttoni, Miguel Fernández Ruiz, Qianhui Yu, Francesco Rafael Alberto Moccia

The compressive resistance of concrete in new structures is usually characterized on the basis of tests performed on concrete cylinders or cubes under relatively rapid loading conditions. Although efficient for material characterization, these tests do not ...

ERNST & SOHN2021

Solute-dislocation interactions and creep-enhanced Cu precipitation in a novel ferritic-martensitic steel

Roland Logé, Cyril Cayron

G115 steel has gained a growing interesting recently for its use in next-generation ultra-supercritical power plant applications. Due to the high densities of dislocations and lath martensite boundaries in G115 steel, interactions between solutes and dislo ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Intrinsic fracture behavior of Mg-Y alloys

William Curtin, Eleanor Yi Kei Mak

Pure magnesium (Mg) is an attractive metal for structural applications due to its low density, but also has low ductility and low fracture toughness. Dilute alloying of Mg with rare earth elements in small amounts improves the ductility, but the effects of ...

2020

Multiaxial fatigue analysis of high-strength steel welded joints using generalized local approaches

Martin Antonio René Garcia

The objective of this thesis is to improve methods for predicting the fatigue life, multiaxial or not, of mild- and more particularly high-strength steels using local approaches that have the capacity to be applicable to almost any cases, hence the term ge ...

EPFL2020

Neutron Diffraction and Diffraction Contrast Imaging for Mapping the TRIP Effect under Load Path Change

Helena Van Swygenhoven

The transformation induced plasticity (TRIP) effect is investigated during a load path change using a cruciform sample. The transformation properties are followed by in-situ neutron diffraction derived from the central area of the cruciform sample. Additio ...

MDPI2020

Experimental and theoretical investigation of crystallography and variant selection during massive transformation in Zr alloy

Cyril Cayron

Massive transformation, as a non-conventional solid-state phase transformation mode, is scarcely observed in metals with hexagonal closed packed (HCP) structure, especially in Zr and its alloys. In this study, however, we report the massive transformation ...

TAYLOR & FRANCIS LTD2019

In situ characterization of work hardening and springback in grade 2 alpha-titanium under tensile load

Helena Van Swygenhoven

Plastic effects during sheet metal forming can lead to undesirable distortions in formed components. Here, the three-stage work hardening and plastic strain recovery ("springback") in a cold-rolled, alpha-phase commercially pure titanium is examined. Inter ...

2019

In situ characterization of a high work hardening Ti-6Al-4V prepared by electron beam melting

Helena Van Swygenhoven, Nicola Casati, Karl Alan Sofinowski

A multi-phase Ti-6Al-4V prepared by electron beam melting and thermal post treatments has been shown to exhibit increased strength and ductility over standard wrought or hot isostatic pressed Ti-6-Al-4V. The mechanical improvements are due to a prolonged, ...

2019

Designing high ductility in magnesium alloys

William Curtin, Binglun Yin, Rasool Ahmad

The thermally activated pyramidal-to-basal (PB) transition of (c + a) dislocations, transforming glissile pyramidal dissociated core structures into sessile basal dissociated ones, lies at the origin of low ductility in pure magnesium (Mg). Solute-accelera ...

PERGAMON-ELSEVIER SCIENCE LTD2019

Early Stages of Precipitation In Aluminum Alloys by First-Principles and Machine-Learning Atomistic Simulations

Daniele Giofré

Age hardening induced by the formation of (semi)-coherent precipitate phases is crucial for the processing and final properties of the widely used Al-6000 alloys despite the early stages of precipitation are still far from being fully understood. This cruc ...

EPFL2018