Simon HolzerHi, I am Simon Holzer. I received my B.Sc. and M.Sc. degrees in mechanical engineering with a focus on microtechnology from the Swiss Federal Institute of Technology Zurich (ETHZ) in 2020 and 2022, respectively. I am currently working towards Ph.D. in the Integrated Actuators Laboratory (LAI) at EPFL in Neuchâtel, Switzerland. My research interests lie in the field of soft robotics, artificial muscles, and biomechanics.
Andres Osorio SalazarExpertise
Robotics, advanced actuator design, soft actuators, sensor design, embedded systems, human-machine interface architecture, electronic-less control, mechanism design, additive and traditional manufacturing, industrial automation, process control, and fluid robotics.
Current Work
Smart Footwear for Diabetic Foot Care and Ulcer PreventionEvery 20 seconds, a person with diabetes has to face an amputation somewhere in the world. The main risk factor is high plantar pressure combined with foot nephropat
Bokeon KwakExpertise
Bio-inspired robotics, Edible Robotics, Soft Robotics
Stefana ParaschoEnseignement et PhD Doctorant·es actuel·les Jingwen Wang, Gabriel Vallat, Maxence Grangeot, Eleni Maria Skevaki, Wenqian Yang, Megi Sinani Cours Capitalizing on Uncertainty AR-809 Digital design and making: A critical introduction AR-503 Le cours présente des méthodes de conception et de fabrication numériques en combinant des compétences techniques avec des connaissances théoriques et une réflexion critique. Les sujets incluent: la programmation pour la conception, la fabr
Daryl Yee Wei LiangIncoming Assistant Professor of Electrical and Microengineering (March 2023)
Junrui ChenJunrui Chen was born in 1995 in Jinhua, China.
He achieved his BSc. in mechanism and its automation from Beihang University(BUAA), Beijing in 2017. Meanwhile, he also gets a second degree in Business administration and management. He graduated with MSc. at Karlsruhe Institute of Technology (KIT), Germany in 2021, majored in medical technology (IBT, Instituts für Biomedizinische Technik) and Biomems technology (IMT, Institute of Microstructure Technology).
In March 2022 he joined Integrated Circuits Laboratory (ICLAB) at EPFL and is currently pursuing his Ph.D. in Microsystems and Microelectronics under the supervision of Prof. Sandro Carrara. His current research field is based on silicon memristive nanowire, which is a cross-discipline project supported by expertise in Microstructure technology, promoted by a solid background in Machinery and Electronics, and supplemented by programming skills.
Ali MeimandiExpertise
Research interests:Analog and digital circuit designBiomedical circuits and systems
Ali Meimandi received B.Sc degree in electrical engineering from Amirkabir University of Technology(Tehran Polytechnic), Tehran, Iran, and M.Sc. degree in electronic engineering from Politecnico di Milano, Milan, Italy, in 2018 and 2022, respectively. He is a Research Assistant and doctoral candidate in the BioCMOS Interfaces(BCI) Laboratory at école Polytechnique Fédérale de Lausanne, Lausanne, Switzerland.His res
Pasquale ScarlinoI obtained my master's degree in Physics at the University of Salento, Lecce (Italy) in February 2011. During 2006-2011, I have also been a student of Scuola Superiore ISUFI (SSI). SSI is one of six schools of excellence established in Italy to develop the intellectual capital in technological and social sciences. I conducted an external Master thesis project during an 8 months internship in the Quantum Transport Group at TU Delft, under the supervision of Prof. L.M.K. Vandersypen. There, I implemented the Quantum Point Contact Radio-Frequency Reflectometry technique, which allows increasing the single-shot electron spin readout bandwidth and is currently routinely used in the group.I obtained my Ph.D. degree in February 2016, in the Spin Qubits group of Prof. L.M.K. Vandersypen at the Kavli Institute of Nanoscience-Qutech (TU Delft). During my Ph.D. I have been leading the Si/SiGe spin qubits project, collaborating with the M. Eriksson Group at Wisconsin University. In parallel, I have been working on other different projects, in particular with GaAs depletion quantum dots, high impedance superconducting resonators, and surface acoustic wave resonators. I have been working as a Postdoc fellow in the group of Prof. A. Wallraff (Quantum Device Lab) at ETH Zurich. My main project, in collaboration with the group of Prof. K. Ensslin and Prof. T. Ihn, consisted in integrating semiconductor and superconductor technologies. Realizing a well-controlled interface between the semiconductor and superconductor-based quantum information technologies may allow harnessing the best of both device architectures, for example by providing an interface between strongly coupled charge state and high coherence spin states. Furthermore, it enables the possibility to explore light/matter hybridization in a class of solid-state systems and regimes that are new in the context of quantum optics.From June 2019 till September 2020, I have been a Senior Researcher at Microsoft Station Q Copenhagen and at the Center for Quantum Devices in Copenhagen, focusing on developing semiconductor-superconducting hybrid hardware for topologically protected quantum computation.Since October 2020, I am a tenure track Assistant Professor of Physics in the School of Basic Sciences at the EPFL where I founded the Hybrid Quantum Circuit (HQC) laboratory.
Francesca RodinoExpertise
Electrochemical BiosensorsSensors and Biosensors interfaces | front-end electronicsBiomedical circuits and systems
RechercheOther Tavakolidakhrabadi, A., Domange, T., Nalm, C., Rodino, F., Meimandi, A., Bessire, C., & Carrara, S. (2024). A Novel Microfluidic System for Capacitive Detection via Magnetophoretic Separation of Malaria-Infected Red Blood Cells. IEEE Sensors Letters. DOI: 10.1109/LSENS.2024.3451238Barbruni, G. L., Rodino, F., Ros, P. M., Demarchi, D., Ghezzi, D., & Carrara, S. (2024). A
Junsoo KimExpertise
Artificial Muscles, Electrostatic Actuators, Wearable Robotics, Humanoid Robotics
Andrew James SontaExpertise
Human-building interaction, building energy, occupant behavior, sustainable design and planning, walkability, network analysis, machine learning, urban informatics, social systems.
Andrew Sonta is a tenure track assistant professor of sustainable civil engineering at EPFL. He directs the ETHOS Lab: Engineering and Technology for Human Oriented Sustainability. ETHOS is an interdisciplinary research group focused on using data-driven and computational tools to create interventions in the built envir
Suong NguyenEnseignement et PhD Doctorant·es actuel·les Shubhanga Ballal, Yuji Watanabe Cours Modern methods in polymer chemistry and sustainability ChE-431
Du WenEducation PhD | Doctor of Philosophy, Mechanical Engineering 2020 – 2023 The University of Tokyo MEng | Master of Engineering, Power Engineering and Engineering Thermophysics 2016 – 2019 Xi’an Jiaotong University Bsc | Bachelor of Engineering 2012 – 2016 Xi’an Jiaotong University
Zheru QiuBefore joining LPQM, I graduated from University of Science and Technology of China with a bachelor's degree. In USTC, I actively worked in Prof. Zheng-tian Lu's research group and I mainly participated in the atomic magnetometer project led by Prof. Dong Sheng.
Francisco Xavier Felix Martin Del CampoEnseignement et PhD Cours Material flow analysis and resource management ENV-501 Ce cours permet de maîtriser les bases des processus de production et consommation de matières et d'énergie. Les étudiants développent une analyse de flux de matières, l'appliquent à la gestion des ressources, aux activités économiques ainsi qu'à l'élaboration de politiques publiques.
Emily Caroline Bezerra AlexandreExpertise
Printed electronics, flexible sensors, sustainable electronics, additive manufacturing
Emily Bezerra obtained her BSc. degree in Science and Technology from the Federal University of Rio Grande do Norte (UFRN), Brazil, in 2019, followed by a second BSc. degree in Materials Engineering from the same institution in 2020. In 2022, she received a master´s degree in Materials Science and Engineering from the King Abdullah University of Science and Technology (KAUST), Saudi Arabia. As part of her maste
Armando Matthieu WalterMission
Innover, créer et transmettre. Trois terme qui représente mes objectifs en tant qu'ingénieur au Centre pour Muscle Artificiels
Travail en cours
Responsable de la fabrication et prototypage des implants cardiaque
Originaire de Neuchâtel, Armando Walter a suivi un cursus en microtechnologie et électronique à la HE-Arc. Il a ensuite obtenu un Master en ingénierie biomédicale à l’Université de Berne. Animé par la volonté de mettre ses compétences au service de la santé et de l’innovation médicale, il or
Wenchao YueExpertise
Robotics, Medical Mechatronics, Medical Reconfigurable Robots, Soft Machine, Piezo Actuators/Sensors
Brief Biography Wenchao Yue is a Ph.D. candidate in Electronic Engineering at The Chinese University of Hong Kong (CUHK). He has received the PhD International Mobility for Partnerships and Collaborations Award (PhD IMPAC Award) 2024, the IEEE ROBIO Best Paper Finalist Award 2024, the Overseas Research Attachment Programme (ORAP Award) 2025, and the Professor Charles K. Kao Student Creativity (PCKK
