Manuel Guizar SicairosEnseignement et PhD Doctorant·es actuel·les Aknur Karabay, Pengju Sheng, Wenxuan Fang Cours Physical Optics and Advanced Imaging PHYS-715
Ana Conde RubioI received my degree in Physics in 2012 by the University of Zaragoza after doing my last year in Southampton (UK), where I had my first contact with nanotechnology. I moved then to study the Master of Nanoscience and Nanotechnology at University of Barcelona. During my master’s project in the Group of Magnetic Nanomaterials entitled Sputtering and characterization of granular AuFe as Nanoimprint Lithography nanoparticle precursors I worked in sputtering deposition, transport measurements to analyze magnetoresistance, magnetization analysis with SQUID, absorbance measurements in the UV-visible range and microstructure analysis by TEM, SEM, MFM and QNM. After finishing my master, I had the opportunity to continue in the group to pursue my PhD under the supervision of Prof. X. Batlle and Prof. A. Labarta. During this stage, my research activities were mainly focused on the simulation, design, fabrication and characterization of plasmonic nanostructures. In particular, I worked intensively with thermal nanoimprint and electron beam lithography in the Clean Room at IMB-CNM, where I performed all the nanofabrication part in collaboration with Prof. Francesc Pérez-Murano’s group, and FDTD Solutions from Lumerical© for the simulation part. Thanks to my FPI contract, I had the opportunity to do a 3-month stay at Prof. Giessen’s group in University of Stuttgart. In the last months of my thesis, I had the pleasure of collaborating with Dr. Agustín Mihi (ICMAB) for the optical characterization.
Currently I am a Postdoctoral Scientist at Prof. Jürgen Brugger’s group (Microsystems Laboratory 1) at École Polytechnique Fédérale de Lausanne (EPFL) working in Thermal Scanning Probe Lithography (t-SPL) for the fabrication of 2D material-based devices. I also contribute with studies in self-assembly where we use capillary assisted particle assembly to create nanogaps and arrays of plasmonic nanoparticles with sensing purposes.
Berke ErbasEducation PhD | Microsystems and Microelectronics 2021 – 2025 EPFL MSc | Microengineering 2019 – 2021 EPFL BSc | Mechanical engineering 2015 – 2019 Istanbul Technical University
Didem DedeEducation BSc in Metallurgical and Materials Engineering | Middle East Technical University, Ankara 2016 – 2016 09/2011 MSc in Materials Science | Bilkent University, Ankara 2018 – 2018 03/2016
Mitali BanerjeeEnseignement et PhD Doctorant·es actuel·les Punam Barman, Emily Hajigeorgiou, Mario Di Luca, Nanyu Yao, Kilian Krötzsch A dirigé les thèses EPFL de Jin Jiang, Zekang Zhou, Jha Rounak Cours Quantum mechanics I PHYS-207 L'objectif de ce cours est de familiariser l'étudiant.e avec les concepts, les méthodes et les conséquences de la physique quantique. Quantum transport in mesoscopic systems PHYS-462 Ce cours vise à présenter les comportements de transport des systèmes de tail
Anat SiddharthExpertise
Nonlinear Optics, Integrated Photonics, Frequency Comb, Nonreciprocity
Research Interest Nonlinear Optics, Integrated Photonics, Frequency Comb, Nonreciprocity
Ata Jedari GolparvarAn Electronics Engineer passionate about everything in-between wearable computing to embedded systems and circuit design. I am a Ph.D. candidate in Microsystems and Microelectronics program of Swiss Federal Institute of Technology Lausanne (EPFL), Switzerland, and working there as a researcher in Integrated Circuits Laboratory (IClab), in its Bio/CMOS Interfaces division, as well as an R&D engineer at Senbiosys focused more on analog IC design and investigation of a miniaturized, non-invasive, point-of-care device to in vivo monitor of transcutaneous glucose concentration.Previously, during my master's studies at Sabanci University, Istanbul, Turkey between 2017 and 2019, where I was a teaching and research assistant, I turned more toward device level by joining Micro/Nano Devices and Systems lab (SU-MEMS) and specialized in wearable/flexible electronics and their applications in point-of-care devices as well as semiconductor device fabrication. Prior to grad school, I spent almost two years working as an embedded system developer in Nanopardaz, a company dedicated to designing electronic control boards for household appliances, where my responsibly mainly included software development for various embedded systems and design of electronic circuits and multilayer PCBs. I obtained my bachelor's in electronics at Azad University of Tabriz, Iran between 2012 and 2016 with specializing mostly in embedded systems and system-level circuit design.
Francesco ArmillottaExpertise
Physique de la matière condensée, Physique des surfaces
Je suis actuellement post-doctorant dans le groupe Laboratoire des Nanostructures de Surfaces (LSN), intéressé par les propriétés catalytiques des (sub) nanostructures confinées en surface.
Enseignement et PhD Cours Physique du solide PHYS-337 Ce cours donne une introduction à la Physique du solide, notamment à la structure cristalline, aux vibrations duréseau, aux propriétés électroniques, de transport thermique et électrique
Gian Luca BarbruniGian Luca Barbruni achieved his BSc and his MSc in Biomedical Engineering with specialisation in Biomedical Instrumentation at the Politecnico di Torino in 2017 and 2019, respectively.During his master thesis, supervised by Prof. Danilo Demarchi from Politecnico di Torino and titled “Body Dust: Feasibility study on signal transmission for sub-100μm-size active wireless biosensors”, he spent a semester of research at Integrated Circuit Laboratory (ICLAB) of Neuchâtel under the supervision of Prof. Sandro Carrara from École Polytechnique Fédérale de Lausanne (EPFL), Switzerland. He discusses about the feasibility on creating an UltraSound (US) communication circuit to wirelessly transmit outside the body diagnostic information from multiplexed biosensors chip built on the top layer of a drinkable CMOS “Body Dust” cube. The results of the feasibility study have been published showing promising results with sub-10 µW of power consumption and a total chip area of 43 x 44 µm2.He was a Research Assistant at the Department of Electronic Engineering (DET) of Politecnico di Torino.Actually he is conducting his PhD focusing on design and fabrication of analog and digital circuits for ultra-miniaturized CMOS for vision prosthesis, directed by Prof. Diego Ghezzi at Medtronic Chair in Neuroengineering in Geneva and co-directed by Prof. Sandro Carrara at ICLAB in Neuchâtel.
