Recherche

Afficher tous les résultats pour

Accueil

Personne

Ludger Weber

Cette personne a quitté l’EPFL

À propos
Confidentialité
Mentions légales

Graph Chatbot

Publications associées (62)

Page 2 sur 4

Direct measurement of drainage curves in infiltration of SiC particle preforms: influence of interfacial reactivity

Andreas Mortensen, Ludger Weber, Maryam Bahraini Hasani

We present dynamic measurement of drainage curves in two systems having relevance to metal matrix composite processing, namely SiC/Al and SiC/Al-12.2at%Si. Data show that liquid/solid chemical reactions that cause a lowering of the contact angle do indeed ...

Springer US2008

Surface Modification of Diamonds in Diamond/Al-matrix Composites

Ludger Weber, Reza Tavangar Hamzehkolaei

Fe- or Mn-powders were mixed with the diamonds and the mixtures were heat treated under different gas atmospheres like hydrogen or argon gas and at varying temperatures in order to roughen the surface of the diamond particles. Subsequently the reaction lay ...

Trans Tech Publications2009

Thermal boundary conductance between refractory metal carbides and diamond

Ludger Weber, Christian Monachon

The thermal boundary conductance (TBC) between thin films of Cr, Mo, Nb and W and diamond substrates has been measured using time domain thermoreflectance before and after a high-vacuum heat treatment at 800 degrees C for 2 h. While no signs of carbide for ...

Elsevier2014

Damage evolution in Saffil alumina short-fibre reinforced aluminium during tensile testing

Andreas Mortensen, Ludger Weber, Reza Tavangar Hamzehkolaei

The evolution of microstructural damage during tensile deformation of pure aluminium reinforced with 10 vol.% alumina short fibres is studied by monitoring the evolution of density and Young's modulus as a function of tensile strain. It is found that Young ...

2005

Infiltration of tin bronze into alumina particle beds: influence of alloy chemistry on drainage curves

Andreas Mortensen, Ludger Weber, Alain Léger

The wetting of angular alumina particle preforms by Cu-Sn alloys is investigated by means of pressure infiltration experiments conducted at 1150 A degrees C, using a system enabling dynamic and precise measurements of the metal volume injected into the pre ...

Springer Verlag2014

Influence of sample processing parameters on thermal boundary conductance value in an Al/AlN system

Ludger Weber, Mohamad Hojeij, Christian Monachon

The influence of sample processing parameters on the thermal boundary conductance (TBC) between aluminum and aluminum nitride has been investigated by transient thermoreflectance. An evaporated Al layer on the polished substrate yielded a TBC at ambient of ...

American Institute of Physics2011

Ductility of Saffil(TM) short fibre reinforced metals

Andreas Mortensen, Ludger Weber, Reza Tavangar Hamzehkolaei

It is proposed that a critical combination of matrix strain hardening exponent and fibre volume fraction must be exceeded to confer attractive tensile ductility to short-fibre reinforced metal. © 2005 Acta Materialia Inc. Published by Elsevier Ltd. Al ...

2005

Damage accumulation during cyclic loading of a continuous alumina fibre reinforced aluminium composite

Andreas Mortensen, Ludger Weber, Benedikt Moser

Fibres fracture gradually during the fatigue cycling of continuous alumina fibre reinforced aluminium. The number of fibre breaks increases linearly with the logarithmic cycle number, depends on the maximum stress and the stress ratio, and agrees with publ ...

2005

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/ graphite preforms

Ludger Weber, Caroline Hain, Manoj Kondibhau Naikade, Annapaola Parrilli

Porous carbonaceous preforms, made from graphite and silicon carbide (SiC) powders, with varying graphite powder mass fractions and particle sizes, were infiltrated at 1500 degrees C and 1700 degrees C by Si-8 at. pct Zr alloy to produce dense Si-Zr-SiC co ...

ELSEVIER SCI LTD2023

Dissipateur thermique constitue d'un materiau composite diamant-cuivre renfermant du bore

Ludger Weber

A heat sink that is particularly suitable for semiconductor components is made from a diamond-containing composite material. In addition to a diamond fraction amounting to 40-90% by volume, the composite material also contains 7 to 59% by volume copper or ...

2005

Rigidity of diamond reinforced metals featuring high particle contents

Ludger Weber, Reza Tavangar Hamzehkolaei

Diamond/metal composites with diamond contents between 57 and 72 vol% have been produced by gas pressure assisted liquid metal infiltration using Ag-3 wt% Si and Al-2 wt% Cu as matrix. The experimental data cover a range of Young's moduli from 300 to 425 G ...

2009

Mechanical behaviour of diamond reinforced metals

Ludger Weber, Reza Tavangar Hamzehkolaei

Diamond reinforced metals with a diamond content of 55-60 vol.% were made by gas driven liquid metal infiltration. They were characterized with regard to their stiffness, strength and fracture toughness as a function of diamond particle size and matrix all ...

2009

Influence of the thickness of a nanometric copper interlayer on Au/dielectric thermal boundary conductance

Ludger Weber, Maïté Blank

The influence of the thickness of a thin (1.5-30 nm) copper layer on the thermal boundary conductance (TBC) at the interface between gold and silicon, sapphire and diamond, respectively, was studied using Time Domain Thermoreflectance. Overall, a monotonic ...

2018

Influence of interfacial structural disorder and/or chemical interdiffusion on thermal boundary conductance for Ti/Si and Au/Si couples

Ludger Weber, Maïté Blank

This work aims at experimentally assessing the effect of structural disorder and/or chemical interdiffusion on thermal boundary conductance (TBC) at metal/dielectric interfaces. To this end, the TBC of Au/Si and Ti/Si interfaces was measured by time domain ...

2019

Solid solubility of germanium in silver

Ludger Weber, Hamed Kazemi

The solid solubility of germanium in silver has been measured in the temperature range of 520 K to 913 K via measurements of density and of electrical conductivity of two near-eutectic Ag-Ge alloys. The atomic fraction of germanium in solid solution varied ...

Elsevier2012

Effects of partial crystallization in Pt-Si-B-based bulk metallic glasses on glass transition and crystallization of the remaining amorphous matrix

Ludger Weber, Hamed Kazemi, Cyrill Werner Cattin

The influence of partial crystallization on the evolution of the characteristic temperatures, i.e. of the glass transition and the onset of crystallization, the density, and the mechanical properties of the bulk metallic glass Pt(49.95)Si(6)AB(24)Ge(3)Cu(1 ...

Elsevier2017

Thermal conductivity of aluminum matrix composites reinforced with mixtures of diamond and SiC particles

Ludger Weber, Martin Rhême

Aluminum matrix composites reinforced with mixtures of diamond and SiC particles of equal size were produced by gas pressure assisted liquid metal infiltration. Replacing SiC gradually by diamond particles results in a steady increase of thermal conductivi ...

2008

Tensile flow stress of ceramic particle-reinforced metal in the presence of particle cracking

Andreas Mortensen, Ludger Weber, Andreas Rossoll, Randoald Müller

A simplified model is proposed to quantity the effect of damage in the form of particle cracking on the elastic and plastic behaviour of particle-reinforced metal matrix composites under uniaxial tensile loading: cracked particles are simply replaced, in a ...

2008

Effect of hydrostatic pressure on flow and deformation in highly reinforced particulate composites

Andreas Mortensen, Ludger Weber

Infiltrated particle reinforced composites combine a dense matrix with particles that are in mutual contact and can therefore transfer compressive stress directly from one particle to the next. As a result, these composites may combine characteristics of t ...

Elsevier2016

Thermal boundary conductance of transition metals on diamond

Ludger Weber, Christian Monachon

An experimental process that was used to obtain a direct measurement of Thermal Boundary Conductance (TBC) between a diamond substrate and several transition metals, deposited by sputtering, is described. Using Time-Domain ThermoReflectance (TDTR), the cri ...

2012