Oleg MalanyukEnseignement et PhD Cours Physics III PHYS-200 Physique de fluides et introduction de électromagnétisme
Simon Pierre Henri VincentEnseignement et PhD Cours Physique générale : électromagnétisme PHYS-201(a) Le cours traite des concepts de l'électromagnétisme et des ondes électromagnétiques.
Christian KöchliEnseignement et PhD Doctorant·es actuel·les Maël Dagon A co-dirigé les thèses EPFL de Sebastiano Merzaghi, Chafic Abu Antoun, Florian Louis Copt, Sofia Lydia Ntella Cours Actionneurs et systèmes électromagnétiques I MICRO-313 Le cours aborde les principales méthodes pour l'analyse de systèmes électromécaniques. Une étude des grandeurs physiques magnétiques est suivie par la conversion de l'énergie électrique en énergie mécanique. L'aimant permanent est étudié de manière macroscopique. L'as
Fabio AvinoEducation PhD in Physics | Turbulence at the boundary of toroidal plasmas with open and closed magnetic flux surfaces 2011 – 2015 EPFL Master in Physics | Rifrattometria su Plasmi di Interesse Termonucleare 2008 – 2010 La Sapienza Bachelor in Physics | Fluorescenza X portatile per l'analisi dei beni culturali 2005 – 2008 La Sapienza Professionals experiences Physicist - Senior Fellow 2017–2020 CERNScientist 2016–2017 EPFL
Teaching & PhD P
Karim AchouriEnseignement et PhD Doctorant·es actuel·les Mahmoud Abouelatta, Hossein Allahverdizadeh, Mustafa Yücel Cours Applied Electromagnetics for Metamaterial Design MICRO-449 This course provides the students with the appropriate electromagnetics foundation to understand, model and design metamaterials, especially two-dimensional electromagnetic and optical structures such as metasurfaces. This course covers concepts that apply to both the microwave and optical regimes. Ingénierie optique (pour
Parmenion MavrikakisExpertise
Computational electromagnetics, integral equations, finite element analysis, metasurfaces, photonics, plasmonics and microwaves.
Current Work
Developing a C++ code for the modeling of light scattering in layered media with the surface integral equation method.
I am a PhD student in the Electrical Engineering Department (EDEE) at École Polytechnique Fédérale de Lausanne (EPFL), affiliated with the Nanophotonics and Metrology Laboratory (NAM), part of the Microengineering Department (IEM) at EPFL. M
Pasquale ScarlinoI obtained my master's degree in Physics at the University of Salento, Lecce (Italy) in February 2011. During 2006-2011, I have also been a student of Scuola Superiore ISUFI (SSI). SSI is one of six schools of excellence established in Italy to develop the intellectual capital in technological and social sciences. I conducted an external Master thesis project during an 8 months internship in the Quantum Transport Group at TU Delft, under the supervision of Prof. L.M.K. Vandersypen. There, I implemented the Quantum Point Contact Radio-Frequency Reflectometry technique, which allows increasing the single-shot electron spin readout bandwidth and is currently routinely used in the group.I obtained my Ph.D. degree in February 2016, in the Spin Qubits group of Prof. L.M.K. Vandersypen at the Kavli Institute of Nanoscience-Qutech (TU Delft). During my Ph.D. I have been leading the Si/SiGe spin qubits project, collaborating with the M. Eriksson Group at Wisconsin University. In parallel, I have been working on other different projects, in particular with GaAs depletion quantum dots, high impedance superconducting resonators, and surface acoustic wave resonators. I have been working as a Postdoc fellow in the group of Prof. A. Wallraff (Quantum Device Lab) at ETH Zurich. My main project, in collaboration with the group of Prof. K. Ensslin and Prof. T. Ihn, consisted in integrating semiconductor and superconductor technologies. Realizing a well-controlled interface between the semiconductor and superconductor-based quantum information technologies may allow harnessing the best of both device architectures, for example by providing an interface between strongly coupled charge state and high coherence spin states. Furthermore, it enables the possibility to explore light/matter hybridization in a class of solid-state systems and regimes that are new in the context of quantum optics.From June 2019 till September 2020, I have been a Senior Researcher at Microsoft Station Q Copenhagen and at the Center for Quantum Devices in Copenhagen, focusing on developing semiconductor-superconducting hybrid hardware for topologically protected quantum computation.Since October 2020, I am a tenure track Assistant Professor of Physics in the School of Basic Sciences at the EPFL where I founded the Hybrid Quantum Circuit (HQC) laboratory.
Frédéric MilaEnseignement et PhD Doctorant·es actuel·les Afonso Dos Santos Rufino, Mohamed Zakaria Jouini, Tianyue Huang A dirigé les thèses EPFL de Thomas Gloor, François Vernay, Cédric Weber, Julien Dorier, Julien Sudan, Tamás András Tóth, Tommaso Coletta, Frédéric Alexis Michaud, Jérôme Dufour, Natalia Chepiga, Laurent Pagnier, Francisco Hyunkyu Kim, Melvyn Sandy Tyloo, Samuel Gozel, Jeanne Colbois, Ivo Aguiar Maceira, Mithilesh Nayak, Samuel Louis Nyckees, Keita Omiya A co-dirigé les thèses EPFL de Alex Kruchkov,
Gregor JotzuEnseignement et PhD Doctorant·es actuel·les Malo Pierre Yves Herve, Louis Gobber, Chiara Missaglia, Kewei Zhou, Fares Hasan Cours Probability and statistics for materials science MSE-213 Établit les concepts de l'analyse statistique, théorie des probabilités et l'analyse des données. Cela inclut les tests statistiques standard, l'analyse des corrélations et la conception expérimentale. Il introduit des méthodes statistiques informatiques pour analyser de grands ensembles de données. Quan
Jean-Marie Drezet1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) Afficher plus