Pedro Correa FernandezPedro Correa Fernández is a Doctoral Candidate in Architecture at Columbia GSAPP. Before joining GSAPP, he was an adjunct professor at the Architecture School of Universidad Católica de Chile where he taught seminars and lectures on architecture history and related epistemological, aesthetic, and political issues. His current work examines the mediations between technical knowledge, artisanal crafts, and global industrial capitalism in early nineteenth-century Latin America.Pedro holds an architecture degre
Farhad Rachidi-HaeriFarhad Rachidi (IEEE Fellow, EMP Fellow, Electromagnetics Academy Fellow) was born in Geneva in 1962. He received the M.S. degree in electrical engineering and the Ph.D. degree from the Swiss Federal Institute of Technology, Lausanne, in 1986 and 1991 respectively.
He worked at the Power Systems Laboratory of the same institute until 1996 and had several short stays at the University of Florida and the NASA Kennedy Space Center. In 1997, he joined the Lightning Research Laboratory of the University of Toronto in Canada and from April 1998 until September 1999, he was with Montena EMC in Switzerland. He is currently a titular professor and the head of the EMC Laboratory at the Swiss Federal Institute of Technology, Lausanne, Switzerland.
His research interests concern electromagnetic compatibility, lightning electromagnetics and electromagnetic field interactions with transmission lines.
Dr. Rachidi is currently a member of the Advisory Board of the IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY and the President of the Swiss National Committee of the International Union of Radio Science.
He has received numerous awards including the 2005 IEEE EMC Technical Achievement Award, the 2005 CIGRE Technical Committee Award, the 2006 Blondel Medal from the French Association of Electrical Engineering, Electronics, Information Technology and Communication (SEE), the 2016 Berger Award from the International Conference on Lightning Protection, the 2016 Best Paper Award of the IEEE Transactions on EMC, and the 2017 Motohisa Kanda Award for the most cited paper of the IEEE Transactions on EMC (2012-2016).
In 2014, he was conferred the title of Honorary Professor of the Xi’an Jiaotong University in China.
He served as the Vice-Chair of the European COST Action on the Physics of Lightning Flash and its Effects from 2005 to 2009, the Chairman of the 2008 European Electromagnetics International Symposium, the President of the International Conference on Lightning Protection from 2008 to 2014, the Editor-in-Chief of the Open Atmospheric Science Journal (2010-2012) and the Editor-in-Chief of the IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY from 2013 to 2015. He is a Fellow of the IEEE and of the SUMMA Foundation, and a member of the Swiss Academy of Sciences.
He is the author or coauthor of over 200 scientific papers published in peer-reviewed journals and over 400 papers presented at international conferences.
Emre TelatarEnseignement et PhD Doctorant·es actuel·les Serhat Emre Coban, Adway Girish, Ryan Yuanqing Song A dirigé les thèses EPFL de Aslan Tchamkerten, Stéphane Musy, Sibi Raj Bhaskaran Pillai, Robert Konsbruck, Dinkar Vasudevan, Eren Sasoglu, Mohammad Karzand, Alla Merzakreeva, Mine Alsan, Marc Desgroseilliers, Mani Bastani Parizi, Rajai Nasser, Serj Haddad, Elie Najm, Yunus Inan, Reka Inovan, Pierre Quinton A co-dirigé les thèses EPFL de Prasenjit Dey, Etienne Perron, Ayfer Özgür Aydin Cours Information theory
Martin VetterliMartin Vetterli a été nommé Président de l'École polytechnique fédérale de Lausanne (EPFL) par le Conseil fédéral à l’issue d’un processus de sélection mené par le Conseil des EPF - qui l'a désigné à l'unanimité.
Né à Soleure le 4 octobre 1957, Martin Vetterli a suivi sa scolarité et effectué sa maturité dans le canton de Neuchâtel. Ingénieur en génie électrique de l’ETHZ (1981), diplômé de l’Université de Stanford (1982) et docteur en sciences de l’EPFL (1986), Martin Vetterli a enseigné à Columbia University comme professeur assistant puis associé. Il a ensuite été nommé professeur ordinaire au département du génie électrique et des sciences de l’informatique de l’Université de Berkeley, avant de revenir à l’EPFL en tant que professeur ordinaire à l’âge de 38 ans. Il a également enseigné à l’ETHZ et à l’Université de Stanford.
Ses activités de recherche centrées sur le génie électrique, les sciences de l’informatique et les mathématiques appliquées lui ont valu de nombreuses récompenses nationales et internationales, parmi lesquelles le Prix Latsis National, en 1996. Il est Fellow de l’Association for Computing Machinery et de l'Institute of Electrical and Electronics Engineers et membre de la National Academy of Engineering (NAE) notamment. Martin Vetterli a publié plus de 170 articles et trois ouvrages de référence.
Ses travaux sur la théorie des ondelettes, utilisées dans le traitement du signal, sont reconnus par ses pairs comme étant d’une portée majeure, et ses domaines de prédilection, comme la compression des images et vidéos ou les systèmes de communication auto-organisés, sont au cœur du développement des nouvelles technologies de l’information. En tant que directeur fondateur du Pôle de Recherche National Systèmes mobiles d’information et de communication, le professeur Vetterli est un fervent défenseur de la recherche transdisciplinaire.
Martin Vetterli connaît l’EPFL de l’intérieur. Alumnus de l’Ecole, il y enseigne depuis 1995, a été le vice-président chargé des relations internationales puis des affaires institutionnelles de l’Ecole entre 2004 à 2011, et doyen de la Faculté Informatique et Communication en 2011 et 2012. En parallèle à sa fonction de président du Conseil national de la recherche du Fonds national suisse qu’il a occupé de 2013 à 2016, il dirige le Laboratoire de Communications Audiovisuelles (LCAV) de l’EPFL depuis 1995.
Martin Vetterli a accompagné plus de 60 doctorants en Suisse et aux Etats-Unis pendant leur thèse et se fait un point d’honneur de suivre l’évolution de leur parcours au plus haut niveau, académique ou dans le monde entrepreneurial.
L’ingénieur est l’auteur d’une cinquantaine de brevets qui ont conduit à la création de plusieurs startups issues de son laboratoire, comme Dartfish ou Illusonic, ainsi qu’à des transferts de technologie par le biais de vente de brevets (Qualcomm). Il encourage activement les jeunes chercheurs à poursuivre ces efforts et commercialiser les résultats de leurs travaux.
Nicolas Jean Philippe GuexEnseignement et PhD Cours Bioinformatic Analysis of RNA-sequencing (Fall) BIO-693(a) Due to its success, this course will take place from 1st to 5th September 2025 in room AAC 0 20.It introduces the workflows and techniques that are used for the analysis of bulk and single-cell RNA-seq data. It empowers students to understand and analyze their own data. Bioinformatic Analysis of RNA-sequencing (Spring) BIO-693(b) Methods: omics in biomedical research BIOENG-519
Jean-Marie Drezet1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Fabien Sorin Sep 2002-Oct 2007
Ph.D., Department of Materials Science and Engineering, MIT, USA.
Supervisor: Prof. Yoel Fink; Thesis: Multi-material, Multifunctional Fiber Devices.
After graduating with an engineering degree and a Master of Science in Physics from the Ecole Polytechnique in Palaiseau, France, Prof. Sorin joined the department of Materials Science and Engineering at the Massachusetts Institute of Technology (MIT) in Cambridge, USA for his graduate studies. He worked as a research assistant in the Photonic Bandgap Fibers and Devices Group of Professor Yoel Fink and graduated with a PhD in 2008. His PhD thesis led to the development of a new class of fiber material and devices and he was a pioneer of the field of multi-material fibers.
Mar 2008-Oct 2010
Postdoctoral Associate and Research Scientist, Research Laboratory of Electronics, MIT.
He then joined the Research Laboratory of Electronics at MIT as a Postdoctoral Associate, and continued as a Research Scientist associate, where he conducted independent research in the emerging field of multi-material fibers and was involved and led a variety of projects in fundamental research as well as in collaborations with local start-ups.
Apr 2011 Feb 2013
Research Engineer, Saint-Gobain Recherche, Aubervilliers, France.
Surface du Verre et interface Group
In 2011, prof. Sorin returned to Europe and joined the company Saint-Gobain in the Saint-Gobain Recherche center, its biggest research center located near Paris in France. As a research engineer, he developed a new research thrust investigating new photonic materials and nanostructures for the energy and building industries. In particular, he and colleagues developed innovative processing approaches to deploy photonic nanostructures for light management over large area substrates, for applications in energy harvesting and saving, and for building materials and windows.
Mar 2013 Present
Assistant Professor tenure-track, Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland.
Head of the Photonic materials and fibre devices laboratory (FIMAP)
Since March 2013, he is in the department of Materials Science (IMX) at the Ecole Polytechnique Fédérale de Lausanne (EPFL) as an assistant professor tenure-track. He is starting a research group on photonic materials and fiber devices (FIMAP), continuing on developing innovative materials processing approaches and photonic device architectures to develop new solutions in energy harvesting, saving and storage, in sensing and monitoring, health care and smart fabrics.
Giovanni De CesareExpertise
Simulation numérique et modélisation physique d'ouvrages et aménagements hydrauliques; sédimentation des réservoirs et courants de turbidité; gestion de l'alluvionnement des retenues; mesure des écoulements par ulstrason à effet Doppler; travaux d'aménagement fluvial et revitalisation; génie biologique; écomorphologie fluviale; écoulements transitoires rapides dans les conduite sous pression; transfer de technologie et expertise en hydraulique appliquée, constructions et infrastructures hydrauliqu
