Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Perçage

Publications associées (21)

Rising from rubble - Leveraging existing construction tools for upcycling concrete waste into slender walls

Katrin Beyer, Corentin Jean Dominique Fivet, Stefana Parascho, Maxence Grangeot, Qianqing Wang

In this paper, we present a new method for upcycling concrete rubble waste into slender walls through the lightweight digital augmentation of mainstream construction machines. By using such method, the environmental impact of concrete construction and demo ...

Springer2024

Testing of a full-scale flat slab building for gravity and lateral loads

Aurelio Muttoni

Full-scale testing of a two-storey flat slab structure is reported, undertaken in the SlabSTRESS research project; the construction and testing were planned and carried out at the ELSA laboratory of the European Commission's Joint Research Centre. The dime ...

ELSEVIER SCI LTD2021

Predrilled locking compression plate is more accurate than tension band wiring in restoring articular geometry of the ulnar greater sigmoid notch after olecranon Chevron osteotomy

Alexandre Terrier, Patrick Goetti, Frédéric Vauclair

Introduction: The olecranon Chevron osteotomy (OCO) is commonly used to approach complex intraarticular fractures of the distal humerus. Predrilled tension band wiring (TBW) has historically been used to fix OCO. However, clinical outcomes are burdened by ...

ELSEVIER SCI LTD2020

Fiber Bragg grating-based thermometer for drill bit temperature monitoring

Luc Thévenaz, Kenny Hey Tow

The temperature measurement of a drill bit during an implantology drilling process is proposed by using a fiber Bragg grating fitted inside the drill bit. Due to the rotational nature of the drilling process, a free-space fiber-optic rotary joint is used f ...

2019

Development of a novel mechanical micro-engraving method for the high-aspect-ratio microstructures of an advanced window system

Josef Andreas Schuler, André Gabriel Kostro, Jing Gong

A transparent polymer film with embedded micro mirrors is developed, and it can be attached to a window glass pane for daylighting, improving visual comfort and reducing cooling load in buildings by redirecting sunlight. Despite existing cutting-edge techn ...

2018

Compact fibre Bragg grating-based thermometer for on-line temperature monitoring of drill bits

Luc Thévenaz, Kenny Hey Tow

In this communication, a novel compact fibre Bragg grating-based thermometer for on-line temperature monitoring of drill bits is reported. Our proposed technique can potentially be used to optimize any drilling process, requiring the use of small drill bit ...

SPIE2016

Delamination monitoring using low frequency stress waves for laminated composites

Zhisheng Yang

Owing to the anisotropy of composite laminates, local responses happens at periphery of the drilled hole even under the same loads. The strain measurement is probably the most sensitive and better option to detect and quantify delamination inside composite ...

Politecnico di Milano2016

High performance dye-sensitized solar cells with inkjet printed ionic-liquid electrolyte

Michael Graetzel, Shaik Mohammed Zakeeruddin

We successfully inkjet printed an ionic liquid electrolyte in the dye-sensitized solar cell (DSSC) as a part of a new cell fabrication sequence that eliminates drilling holes in the DSSC substrates. The inkjet printing of ionic liquid electrolyte does not ...

Elsevier Science Bv2015

Cutting Force Modelling for Drilling of Fiber-Reinforced Composites

Mihai-Bogdan Lazar

Although used in a very large variety of applications, drilling is one of the most complex and least understood manufacturing processes. Most of the research on drilling was done in the field of metal cutting for mechanical parts since, in this case, high ...

EPFL2012

Selection of Optimal Cutting Conditions for Pocket Milling Using Genetic Algorithm

Paul Xirouchakis, Saurabh Aggarwal

Pocket milling is the most known machining operation in the domains of aerospace, die and mold manufacturing. In the present work, GA-OptMill, a Genetic Algorithm (GA) based optimization system for minimization of pocket milling time, is developed. A wide ...

Springer London Ltd2013

Cutting torque and tangential cutting force coefficient identification from spindle motor current

Paul Xirouchakis, Saurabh Aggarwal

This article presents an enhanced methodology for cutting torque prediction from the spindle motor current, readily available in modern machine tool controllers. This methodology includes the development of the spindle power model which takes into account ...

Springer-Verlag2012

Part Programming to Realize Chatter Free and Efficient High Speed Milling

Saurabh Aggarwal

High speed milling (HSM) is the most known machining process due to its application in various industries. In milling, a rotating cutting tool removes a large amount of material along a predefined toolpath to manufacture the final part with a desired shape ...

EPFL2012

Surgical preparation of bone-scaffold interface is critical for bone regeneration inside tissue engineering scaffold

Dominique Pioletti, Alireza Roshan Ghias

The goal of this study was to investigate if the preparation of implantation site has an impact on bone formation inside tissue engineering scaffolds. For this purpose, two different drilling techniques were used to create a hole in distal femurs of rats b ...

Wiley-Blackwell2011

Experimental analysis of drilling fiber reinforced composites

Paul Xirouchakis, Mihai-Bogdan Lazar

In comparison with metals, long-fiber reinforced composites have a layered structure, with different properties throughout their thickness. When drilling such structures, internal defects like delamination occur, caused by the drilling loads and their unev ...

2011

Biomechanical Aspects of Osteogenesis in Load-Bearing Tissue Engineering Scaffolds

Alireza Roshan Ghias

There is increasing evidence that mechanical stimulation affects the fate of tissue engineering scaffolds. In clinical situations, it is critical to accelerate bone formation inside the scaffold to reduce the recovery time and increase the chance of succes ...

EPFL2011

Measurement of acoustic attenuation in South Pole ice

Xiaoxia Bai, Mathieu Ribordy, Shirit Cohen

Using the South Pole Acoustic Test Setup (SPATS) and a retrievable transmitter deployed in holes drilled for the IceCube experiment, we have measured the attenuation of acoustic signals by South Pole ice at depths between 190 m and 500 m. Three data sets, ...

2011

Strengthening of flat slabs against punching shear using post-installed shear reinforcement

Aurelio Muttoni, Miguel Fernández Ruiz

A significant number of existing flat slabs currently require strengthening against punching shear for safety reasons (the increase of applied loads and deficiencies during design or construction) or to comply with more stringent code requirements. Availab ...

ACI Structural Journal2010

Very high-speed slotless permanent-magnet motors : theory, design and validation

Pierre-Daniel Pfister

The development of very high-speed motors has evolved fascinatingly in the last few years. Due to their speed, their low weight and their high power density, the need for such motors has recently increased for various different applications. Among them, su ...

EPFL2010

Toward a better understanding of glass gravity-feed micro-hole drilling with electrochemical discharges

Rolf Wüthrich

Spark-assisted chemical engraving (SACE) is a flexible, simple and inexpensive method for machining electrically non-conductive materials. SACE is particularly interesting because of the high drilling speed that can be achieved compared to other micromachi ...

Institute of Physics2009

New Connection System for Confined Concrete Columns and Beams. I: Experimental Study

Yu Bai

A new connection system for a concrete filled steel tube composite column and reinforced concrete beams is proposed. In this connection, the steel tube is interrupted while the reinforced concrete beams are continuous in the joint zone. Multiple lateral ho ...

2008