Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Polyimide

Publications associées (23)

Characterization of a flexible a-Si:H detector for in vivo dosimetry in therapeutic x-ray beams

Nicolas Würsch, Jonathan Emanuel Thomet, Luca Massimiliano Antognini, Sylvain Dunand

BackgroundThe increasing use of complex and high dose-rate treatments in radiation therapy necessitates advanced detectors to provide accurate dosimetry. Rather than relying on pre-treatment quality assurance (QA) measurements alone, many countries are now ...

Wiley2024

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Jz -Yuan Juo

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

EPFL2023

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

Véronique Michaud, Baris Çaglar, Vincent Werlen, Colin Gomez

In this study, three novel thermoplastic impregnation processes were analyzed towards automotive applications. The first process is thermoplastic compression resin transfer molding in which a glass fiber mat is impregnated in through thickness by a thermop ...

ELSEVIER SCI LTD2022

A Kilometre-range Distributed Relative Humidity Fibre Sensor

Tiago Filipe Pimentel Das Neves

Fibre optics sensors have been identified as very good candidates for environmental monitoring inside the silicon detectors operated at CERN's Large Hadron Collider. The objective of this dissertation is the development of a Relative Humidity (RH) distribu ...

EPFL2022

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Lorenz Hagelüken

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Ultralow secondary electron emission and improved vacuum surface insulation of polyimide with scalable nanocomposite coating

Chao Wang, Guang-Yu Sun

Polymers with high surface electric insulation capability are greatly demanded in various electrical devices operating in vacuum ambient. Low secondary electron emission (SEE) is favorable to mitigate vacuum flashover by inhibiting the SEE avalanche across ...

ELSEVIER2022

Advanced methods for Brillouin based distributed optical fiber sensors

Simon Adrien Zaslawski

After more than thirty years of continuous research and development, the performances of conventional Brillouin based distributed optical fiber sensors (DOFS) are now peaking, as they are facing fundamental barriers that restrict the power of the light inj ...

EPFL2021

Semiaromatic polyamides with enhanced charge carrier mobility

John Christopher Plummer, Holger Frauenrath, Nicolas Candau

The control of local order in polymer semiconductors using non-covalent interactions may be used to engineer materials with interesting combinations of mechanical and optoelectronic properties. To investigate the possibility of preparing n-type polymer sem ...

ROYAL SOC CHEMISTRY2021

Soft Printable Electrode Coating for Neural Interfaces

Stéphanie Lacour, Grégoire Courtine, Elvira Pirondini, Florian Dylan Fallegger, Quentin Barraud, Arnaud Bichat, Michael Shur

The mechanical mismatch between implantable interfaces and neural tissues may be reduced by employing soft polymeric materials. Here, we report on a simple strategy to prepare and pattern a soft electrode coating of neural interfacing devices based on a sc ...

2020

Highly Loaded Mildly Edge‐Oxidized Graphene Nanosheet Dispersions for Large‐Scale Inkjet Printing of Electrochemical Sensors

Hubert Girault, Andreas Stephan Lesch, Horst Pick, Milica Jovic, Victor Costa Bassetto, Yingdi Zhu, Bhawna Nagar

Inkjet printing of electrochemical sensors using a highly loaded mildly edge‐oxidized graphene nanosheet (EOGN) ink is presented. An ink with 30 mg/mL EOGNs is formulated in a mixture of N‐methyl pyrrolidone and propylene glycol with only 30 min of sonicat ...

2020

Polyimide Coated Fiber as Optomechanical Sensor

Luc Thévenaz, Desmond Chow Ming Chia

A commercially available optical fiber coated with 8 µm-thickness polyimide is used for measuring the acoustic impedance of the surrounding liquid materials, by means of the generation and detection of forward stimulated Brillouin scattering (FSBS). ...

Optical Society of America2018

High voltage metal oxide thin film transistors to drive arrays of dielectric elastomer actuators

Alexis Pierre Henri Marette

This thesis advances the field of high-voltage thin film transistors (HVTFTs) and dielectric elastomer actuators (DEAs) by demonstrating a strategy for low-voltage addressing of an array of high voltage soft actuators suspended on a flexible substrate. Fi ...

EPFL2018

Polymer derived silicon oxycarbide ceramic monoliths: Microstructure development and associated materials properties

Demetri Psaltis, Eirini Kakkava, Nicola Casati, Giulia Panusa

Polymer derived SiOC and SiCN ceramics (PDCs) are interesting candidates for additive manufacturing techniques to develop micro sized ceramics with the highest precision. PDCs are obtained by the pyrolysis of crosslinked polymer precursors at elevated temp ...

ELSEVIER SCI LTD2018

Combining finite element analyses and mechanical models for the assessment of reinforced concrete slabs

Aurelio Muttoni, Miguel Fernández Ruiz, Raffaele Cantone

The influence of the level of deformation of the flexural reinforcement on the punching strength is well-established and mechanically founded since the pioneer works of Kinnunen and Nylander in the 1960’s. In code provisions, this influence is sometimes re ...

2018

Healing of a glass fibre reinforced composite with a disulphide containing organic-inorganic epoxy matrix

Véronique Michaud, Amaël Maximilien Cohades

We report the development of an intrinsic healing glass fibre reinforced polymer (GFRP) composite based on a disulphide-containing organic-inorganic thermoset matrix. Thermomechanical experiments showed that the newly developed matrix has a combination of ...

Elsevier2017

Mechanochemically Responsive Surfaces and Soft Tissue Adhesive Interfaces Generated via Controlled Radical Polymerization

Nariye Cavusoglu Ataman

Thin coatings applied to surfaces dramatically improve the properties of materials. Thus, they have found application in a broad variety of areas including biomedicine, nanotechnology, bioelectronics and optics, amongst others. Polymer brushes prepared via ...

EPFL2016

Influence of processing routes on morphology and low strain stiffness of polymer/nanofibrillated cellulose composites

Jan-Anders Edvin Maansson, Yves Leterrier, Pierre-Etienne Bourban, John Christopher Plummer, Sylvain Cyril Claude Galland

The morphology of polymer/nanofibrillated cellulose (NFC) composite sheets produced using different techniques and its influence on low strain stiffness were assessed by optical and transmission electron microscopy. Solvent processing led to relatively hom ...

Maney Publishing2015

Physically Based Modeling of Shear Modulus-Temperature Relationship for Thermosets

Thomas Keller, Anastasios Vassilopoulos, Wei Sun

A new physically based model for the simulation of the imaginary part of the shear modulus-temperature (G ''-T) curve of thermosets is introduced in this paper. The model is based on the modification of the G ''-T equation used for thermoplastic polymers v ...

Wiley-Blackwell2015

Temperature effects on material properties and structural response of polymer matrix composites

Wei Sun

Structural components used in civil engineering applications are often subjected to compressive loads. Unlike the tensile strength of fiber-reinforced polymer (FRP) materials, their compressive strength is resin-dominated, exhibiting lower values and more ...

EPFL2015

Surface Modification of Polyimide Thin Films for Peripheral Invasive Neural Interfaces

Silvestro Micera

Despite recognized as one key component for establishing a functional electrical connection with nerves, neural invasive peripheral interfaces are still not optimal for long-term applications in humans. An improvement in the field of biocompatible and nont ...

Asme2013