Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Compression member

Publications associées (30)

Experimental and analytical investigation of shear-reinforced concrete and dowel action

Marko Pejatovic

Codes of practice can be overly conservative, particularly for the shear resistance of reinforced concrete beams with shear reinforcement when large loads act close to supports. This thesis addresses the topic by proposing a refined design approach based o ...

EPFL2024

An adaptive phase field approach to 3D internal crack growth in rocks

Tao Xu, Michael Heap, Alexandra Roma Larisa Kushnir

Modeling the 3D internal crack under compression entails complex fracture mechanics (mode I-II-III fracture), resulting in substantial computational costs and challenges in characterizing fracture morphology characterization for Phase Field Method (PFM) si ...

2024

Non-destructive Prediction of the Buckling Load of Cylindrical Shells

Emilio José Lozano Vazquez

The current research focuses on the prediction of the maximum axial compression load a cylindrical shell is able to bear. This maximum axial compression load is the value at which a cylindrical shell loses stability and abruptly buckles. After the buckling ...

EPFL2022

Web buckling mechanism of pultruded GFRP bridge deck profiles subjected to concentrated load

Congzhe Wang

The web's local buckling is a major failure type of pultruded glass fiber-reinforced polymer (GFRP) bridge deck subjected to concentrated wheel loads. Three kinds of external actions-that is, in-plane shear force, local compressive force and bending moment ...

ELSEVIER SCIENCE INC2021

Minimal mass design of active tensegrity structures

Yafeng Wang

Tensegrity structures have been widely utilized as lightweight structures due to their high stiffness-to-mass and strength-to-mass ratios. Minimal mass design of tensegrity structures subject to external loads and specific constraints (e.g., member yieldin ...

ELSEVIER SCI LTD2021

Soft functional fibers for mechanical sensing and actuation

Andreas Leber

The measurement and generation of mechanical deformations is a key functionality in health monitoring, human-machine interaction, and soft robotics. However, current methods typically rely on small and hard transducers, which result in poor performance, cu ...

EPFL2021

Topology design of general tensegrity with rigid bodies

Yafeng Wang

This study presents a general approach to the topology design of tensegrities with rigid bodies. To the best of the authors' knowledge, all existing topology design methods of tensegrities focus on tensegrities that only consist of members carrying axial f ...

2020

Experimental Evaluation and Numerical Modeling of Wide-Flange Steel Columns Subjected to Constant and Variable Axial Load Coupled with Lateral Drift Demands

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady

This paper presents results from an experimental evaluation on the pre- and post-buckling behavior of 12 steel wide-flange cantilever columns under axial load and lateral drift demands. The influence of several loading and geometric parameters, including t ...

2020

Fiber-based hysteretic model for simulating strength and stiffness deterioration of steel hollow structural section columns under cyclic loading

Dimitrios Lignos

An efficient component model has been developed that captures strength and stiffness deterioration of steel hollow structural section (HSS) columns. The proposed model consists of two fiber-based segments at a member's ends along with an elastic segment in ...

2020

Proposed Updates to the ASCE 41 Nonlinear Modeling Parameters for Wide-Flange Steel Columns in Support of Performance-Based Seismic Engineering

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady, Alexander Riley Hartloper

Nonlinear static and dynamic analyses are utilized by engineers for performance-based seismic risk evaluation of new and existing structures. In this context, nonlinear component modeling criteria are typically based on ASCE 41 guidelines. Experiments on w ...

2019

On Establishing Buckling Knockdowns for Imperfection-Sensitive Shell Structures

Emmanuel Georges Albert Virot

This paper investigates issues that have arisen in recent efforts to revise long-standing knockdown factors for elastic shell buckling, which are widely regarded as being overly conservative for well-constructed shells. In particular, this paper focuses on ...

ASME2018

A mechanical model for failures in shear of members without transverse reinforcement based on development of a critical shear crack

Aurelio Muttoni, Miguel Fernández Ruiz, Francesco Cavagnis

In this paper, a mechanical model consistent with the main assumptions of the Critical Shear Crack Theory (CSCT) is proposed for shear design of slender concrete members without shear reinforcement. To that aim, the shear force that can be transferred thro ...

2018

Simulating Local Buckling-Induced Softening in Steel Members Using an Equivalent Nonlocal Material Model in Displacement-Based Fiber Elements

Dimitrios Lignos

Fiber-based elements are commonly used to simulate steel beam-columns because of their ability to capture P-M interactions and spread of plasticity. However, when mechanisms such as local buckling result in effective softening at the fiber scale, conventio ...

2018

Shear in reinforced concrete without transverse reinforcement : from refined experimental measurements to mechanical models

Francesco Cavagnis

Since the first applications of structural concrete, the shear behaviour of one-way slabs without transverse reinforcement has been largely investigated. Nevertheless, currently in the scientific community there is no general agreement on the mechanisms of ...

EPFL2017

Stability of extended beam-to-girder shear tab connections under gravity induced shear force

Dimitrios Lignos

Extended shear tab connections are widely used to connect beams to the webs of girders. In the full-depth configuration of extended beam-to-girder shear tabs, the shear plate is typically fillet welded to the web, as well as to the top and bottom flanges o ...

Structural Stability Research Council2017

Full-Scale Cyclic Testing of Deep Slender Wide-Flange Steel Beam-Columns under Unidirectional and Bidirectional Lateral Drift Demands

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady

Deep and slender wide-flange steel beam-columns are commonly used in steel special moment frames (SMFs) in North America. These sections provide large moment-of-inertia required to satisfy the design code’s drift limits while keeping the column steel weigh ...

International Association of Earthquake Engineering2017

Updates to the ASCE-41-13 Provisions for the Nonlinear Modeling of Steel Wide-Flange Columns for Performance-based Earthquake Engineering

Dimitrios Lignos, Alexander Riley Hartloper

Performance-based earthquake engineering requires numerical models that are able to reliably predict the expected component behavior of buildings under seismic excitations. The nonlinear modeling guidelines provided in ASCE-41-13 have historically been use ...

2017

Experimental Investigation of the Hysteretic Behavior of Wide-Flange Steel Columns under High Axial Load and Lateral Drift Demands

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady

This paper discusses the findings from a large-scale experimental program that characterized the hysteretic behavior of typical steel wide-flange columns in steel moment-resisting frames (MRFs). The test specimens were tested in a cantilever configuration ...

2016

Temperature effects on material properties and structural response of polymer matrix composites

Wei Sun

Structural components used in civil engineering applications are often subjected to compressive loads. Unlike the tensile strength of fiber-reinforced polymer (FRP) materials, their compressive strength is resin-dominated, exhibiting lower values and more ...

EPFL2015

Structural performance of complex core systems for FRP-balsa composite sandwich bridge decks

Michael Osei-Antwi

Based on current fiber-reinforced polymer (FRP) composite construction principles, FRP decks fall into two categories: pultruded decks and sandwich decks. Sandwich decks comprise face sheets and either honeycombs or foams reinforced with internal FRP webs ...

EPFL2014