Ian SmithPhD Université de Cambridge, 1982 Interêts 1 Contrôle actif de la forme des structures pour améliorer leur aptitude au service et leur déploiement 2 Structures biomimétiques (apprentissage, auto-diagnostic, auto-réparation) 3 Gestion de l'infrastructure par l'identification structurale 4 Applications avancées de l'informatique Plus de détails, voir https://www.epfl.ch/labs/imac/fr/recherche/smith_ian_fr/ Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Xurong LiExpertise
Photonic integrated circuits, terahertz optoelectronics, terahertz imaging systems
Xurong Li received B.S. degree from Peking University in 2016. He obtained M.S. and Ph.D. degrees from University of California, Los Angeles (UCLA) in Prof. Mona Jarrahi's group in 2018 and 2022, respectively, working on terahertz optoelectronics and systems. He continued as a postdoc scholar in the same group from January 2023 to May 2024. Xurong joined the Laboratory of Photonics and Quantum Measurements (LPQM) in
Claudio BruschiniClaudio Bruschini holds an MSc in high energy physics from the University of Genova and a PhD in Applied Sciences from the Vrije Universiteit Brussel (VUB). He started his career with INFN (Italy, 1993), in the WA92 CERN collaboration (particle physics), and then moved to CERN as a Fellow in the European GP-MIMD2 project, attached to the NA48 collaboration (particle physics, parallel programming, 1994-1995). He then started his close collaboration with EPFL, first in the DeTeC (Demining Technology Center) project (sensors for landmine detection/humanitarian demining, 1996-1997). After DeTeC's end, he started the first of a series of fruitful collaborations with the Vrije Universiteit Brussel (VUB) on humanitarian demining related R&D (1998). This was followed by the EUDEM survey project (The European Union in Humanitarian Demining, 1998), the EUDEM2 three year EC sponsored support measure (www.eudem.info, 2001-2004), and the DELVE support action (www.delve.vub.ac.be, 2007). In parallel he started working within the EPFL's AQUA group (Advanced Quantum Architectures, Edoardo Charbon), on topics as diverse as ultrasonic sensors for in-air application, optical 3D and high speed 2D sensing, sensor networks, or tracking/motion capture systems, in particular for the preparation of research projects. This culminated in the European MEGAFRAME (www.megaframe.eu, FP6, 2006-2010, SPAD arrays and related in-pixel time stamping electronics in deep submicron CMOS technology) and SPADnet (www.spadnet.eu, FP7, 2010-2014, networked SPAD arrays for Positron Emission Tomography) projects, coordinated by EPFL-AQUA. As from 2009 he also worked with Dario Floreano on the management of the CURVACE Curved Artificial Compound Eyes FP7 project (www.curvace.org), coordinated by EPFL-LIS. He was also active with CHUV (Lausanne University Hospital) within EndoTOFPET-US (endoscopic PET) as well as on a CTI project devoted to the development of a new hand-held standalone tool for tracer-guided medical procedures. In 2014 he had also the pleasure of joining the EPFL ICLAB of Christian Enz during its ramp-up phase, collaborating on device related topics (SNF GigaRadMOST) and biomedical R&D (NanoTera WiseSkin). Claudio is now fully with EPFL’s Advanced Quantum Architecture (AQUA). He has also been active as independent scientific consultant, under the label CBR Scientific Consulting, on the preparation of (European) R&D project proposals and the execution of individual studies, and worked in 2006 for a local start-up as operations manager and R&D advisor.... but this is another story. An unauthorized early biography is available at http://lami.epfl.ch/team/claudiob/... Mario PaoloneMario Paolone received the M.Sc. (with honors) and the Ph.D. degree in electrical engineering from the University of Bologna, Italy, in 1998 and 2002, respectively. In 2005, he was appointed assistant professor in power systems at the University of Bologna where he was with the Power Systems laboratory until 2011. In 2010, he received the Associate Professor eligibility from the Politecnico di Milano, Italy. Since 2011 he joined the Swiss Federal Institute of Technology, Lausanne, Switzerland, where he is now Full Professor, Chair of the Distributed Electrical Systems laboratory and Head of the Swiss Competence Center for Energy Research (SCCER) FURIES (Future Swiss Electrical infrastructure). He was co-chairperson of the technical programme committees of the 9th edition of the International Conference of Power Systems Transients (IPST 2009) and of the 2016 Power Systems Computation Conference (PSCC 2016). He was chair of the technical programme committee of the 2018 Power Systems Computation Conference (PSCC 2018). In 2013, he was the recipient of the IEEE EMC Society Technical Achievement Award. He was co-author of several papers that received the following awards: best IEEE Transactions on EMC paper award for the year 2017, in 2014 best paper award at the 13th International Conference on Probabilistic Methods Applied to Power Systems, Durham, UK, in 2013 Basil Papadias best paper award at the 2013 IEEE PowerTech, Grenoble, France, in 2008 best paper award at the International Universities Power Engineering Conference (UPEC). He was the founder Editor-in-Chief of the Elsevier journal Sustainable Energy, Grids and Networks and was Associate Editor of the IEEE Transactions on Industrial Informatics. His research interests are in power systems with particular reference to real-time monitoring and operation, power system protections, power systems dynamics and power system transients. Mario Paolone is author or coauthor of over 300 scientific papers published in reviewed journals and international conferences.
Guido HaefeliEnseignement et PhD Doctorant·es actuel·les Federico Ronchetti, Gauri Napoletano A co-dirigé les thèses EPFL de Axel Kuonen, Olivier Göran Girard, Carina Trippl Cours Particle detection PHYS-440 Introduction des différentes interactions des particules dans la matière. Différentes techniques de détection comme scintillateurs, détecteurs à gas, silicium, et détecteurs pour identification de particules.
Olivier SchneiderAprès une thèse en physique des particules à l'Université de Lausanne, soutenue en 1989, Olivier Schneider rejoint le LBL, Lawrence Berkeley Laboratory (Californie), pour travailler sur l'expérience CDF au Tevatron de Fermilab (Illinois), d'abord au bénéfice d'une bourse de chercher débutant du Fonds National Suisse pour la Recherche Scientifique, puis comme post-doc au LBL. Il participe à la construction et à la mise en service du premier détecteur de vertex au silicium fontionnant avec succès auprès d'un collisionneur hadronique, détecteur qui a permis la découverte du sixième quark, appelé "top". Dès 1994, il revient en Europe et participe à l'expérience ALEPH au grand collisionneur électron-positon du CERN (Genève), comme boursier puis comme titulaire d'un poste de chercheur au CERN. Il se spécialise en physique des saveurs lourdes. En 1998, il est nommé professeur associé à l'Université de Lausanne, puis professeur extraordinaire à l'EPFL en 2003, et enfin professeur ordinaire à l'EPFL en 2010. Ayant participé depuis 1997 à la préparation de l'expérience LHCb au collisionneur LHC du CERN, entrée en fonction à fin 2009, il en analyse maintenant les données. Il contribue aussi depuis 2001 à l'exploitation des données enregistrées par l'expérience Belle au laboratoire KEK (Tsukuba, Japon). Ces deux expériences étudient principalement les désintégrations de hadrons contenant un quark b, ainsi que la violation de CP, c'est-à-dire le non-respect de la symétrie entre matière et antimatière.
Kamiar AminianExpertise
Biomechanics of human movement Wearable Technology / Inertial sensors Gait Analysis / Physical Activity Monitoring Physical activity Patterns Sport Performance Orthopedics / Rehabilitation engineering Fall Prevention in Elderly Motor function in Parkinson disease Physical behavior in chronic pain
Expertise
Biomechanics of human movement Wearable Technology / Inertial sensors Gait Analysis / Physical Activity Monitoring Physical activity Patterns Sport Performance Orthopedics / Rehabilitation engin
Jack Richard GreenwoodExpertise
Superconducting magnets for fusion energy (LTS and HTS).Superconducting magnet technology prototyping and testing.High-field measurements on superconductors with currents up to 100 kA.Critical currents in superconducting materials: flux pinning, Josephson junctions, and percolation theory. Beyond (p,q) models.Superconductors under strain.
Current Work
I joined the Swiss Plasma Centre's Superconductivity Group (SPC-SG) in 2023. The group is part of EPFL and it is physically located at the Paul Sche
Roger HerschRoger D. Hersch is professor of Computer Science and head of the Peripheral Systems Laboratory at EPFL. He received his engineering degree from ETHZ in 1975, worked in industry from 1975 to 1980, and obtained his PhD degree from EPFL in 1985. He directed the widely known
Visible Human Web Server project
, which offers a number of services for the visualization of human anatomy.
His current research focuses on color reproduction, spectral color prediction models, moiré imaging, and visual document security. Recent achievements include the PhotoProtect technology, which incorporates text as chromatic differences in order to protect identity photographs (Swiss driving license), microstructure imaging, which is used by railways companies (SNCF, RENFE) and festival organizers (Paleo) to print tickets at home and the band moire imaging technology for the protection of security documents.
Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
Anja SkrivervikEnseignement et PhD Doctorant·es actuel·les Erik Ralf Algarp, Amir Mohsen Ahmadi Najafabadi, Behnaz Bakhtiari, Jiajun Li, Ahmet Bilir A dirigé les thèses EPFL de Christophe Caloz, Tomasz Grzegorczyk, Olivier Patrick Staub, Francisco Jesus Nunez, Katarina Blagovic, Julien Perruisseau-Carrier, Juliane Iten Chaves Simoes, Gabriela Quintero Diaz De Leon, Francesco Merli, Maddalena Violetti, Nuno Pires, Mohsen Koohestani, Jovanche Trajkovikj, Hamed Hasani, Anton Evgeniev Ivanov, Miroslav Veljovic, Danelys Rodr
Simon Nessim HeneinSimon Henein obtient son diplôme d’ingénieur en microtechnique de l’Ecole Polytechnique Fédérale de Lausanne (EPFL) en 1996, puis le titre de docteur ès sciences techniques de cette même institution en 2000. En 2001 il publie un livre intitulé « Conception des guidages flexibles » qui devient une référence dans le monde de la conception micromécanique. Ce livre sera traduit en anglais et complété dans un ouvrage collectif intitulé "The art of flexure mechanism design" publié en 2017.Simon Henein s’engage ensuite professionnellement au Centre Suisse d’Electronique et Microtechnique (CSEM) où il conçoit et développe des mécanismes dédiés à des applications robotiques, spatiales, astrophysique, biomédicales et horlogères, ainsi qu’à l’Institut Paul Scherrer où il développe des instruments pour le synchrotron suisse SLS. Depuis le 1er novembre 2012, il est professeur associé en microtechnique à l’EPFL et directeur du Laboratoire de conception micromécanique et horlogère (Instant-Lab). De 2020 à 2021 il effectue un congé de recherche en tant que professeur invité au Centre d'études théâtrales de l'Université de Lausanne (faculté des lettres).
Florent CosandierRecherchePublications M. A. Roa et al., ‘Autonomous Precise Assembly of Segmented Mirror Tiles for a Space Telescope’, in 2024 IEEE Aerospace Conference, Big Sky, MT, USA: IEEE, Mar. 2024.F. Cosandier, M. Nijenhuis, J. Huser, and S. Henein, ‘Design of a Flexure-Based Constant-Velocity Joint Optimized for High Axial Loads’, 21st European Space Mechanisms and Tribology Symposium, Lausanne, Switzerland, Sept 2025.P. Flückiger, F. Cosandier, H. Schneegans, and S. Henein, ‘Design of a Flexure-Based Flywheel for
Drazen DujicDrazen Dujic is an Associate Professor and Head of the Power Electronics Laboratory at EPFL. He received the Dipl.Ing. and MSc degrees from the University of Novi Sad, Serbia in 2002 and 2005, respectively, and the PhD degree from Liverpool John Moores University, UK in 2008. From 2003 to 2006, he was a Research Assistant with the Faculty of Technical Sciences at University of Novi Sad. From 2006 to 2009, he was a Research Associate with Liverpool John Moores University. After that he moved to industry and joined ABB Switzerland Ltd, where from 2009 to 2013, he was Scientist and then Principal Scientist with ABB Corporate Research Center in Baden-Dättwil, and from 2013 to 2014 he was R&D Platform Manager with ABB Medium Voltage Drives in Turgi. He joined EPFL in 2014 as Tenure Track Assistant Professor and was promoted to Associate Professor in 2021. His research interests include the areas of design and control of advanced high power electronic systems and high-performance drives, predominantly for the medium voltage applications related to electrical energy generation, conversion and storage. He has authored or coauthored more than 150 scientific publications and has filed 16 patents. In 2018 he received EPE Outstanding Service Award from European Power Electronics and Drives Association and in 2014 the Isao Takahashi Power Electronics Award for Outstanding Achievement in Power Electronics. He is Senior Member of IEEE, and serves as Associate Editor for IEEE Transactions on Power Electronics, IEEE Transactions on Industrial Electronics and IET Electric Power Applications. He is Chairman of the Swiss IEEE Power Electronics Society (PELS) Chapter and IEEE PELS R8 Chair.
Patrick ThiranPatrick Thiran is a full professor in network and systems theory at the School of Computer and Communication Sciences at EPFL. He holds an electrical engineering degree from the Université Catholique de Louvain, Louvain-la-Neuve, Belgium, an M.Sc. degree in electrical engineering from the University of California at Berkeley, USA, and he received the PhD degree from EPFL, in 1996. He became an adjunct professor in 1998, an assistant professor in 2002, an associate professor in 2006 and a full professor in 2011. He was with Sprint Advanced Technology Labs in Burlingame, California, in 2000-01.
His research interests are in communication and social networks, performance analysis and stochastic models. He is currently active in the analysis and design of wireless and PLC networks (scaling laws, medium access control), in network monitoring (network tomography, multi-layer networks), and data-driven network science. He also contributed to network calculus and to the theory of locally coupled neural networks and self-organizing maps.
He served as an associate editor for the IEEE Transactions on Circuits and Systems in 1997-99 and for the IEEE/ACM Transactions on Networking in 2006-10. He is currently on the editorial board of the IEEE Journal on Selected Areas in Communication. He is/was on the program committee of different conferences in networking, including ACM Sigcomm, Sigmetrics, IMC, CoNext and IEEE Infocom. He was TPC chair of AMC IMC 2011 and CoNext 2012. He is a Fellow of the Belgian American Educational Foundation and of the IEEE. He received the 1996 EPFL Doctoral Prize and the 2008 Crédit Suisse Teaching Award.
Jean-Marie Drezet1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 