Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Carbure de tungstène

Publications associées (31)

A new 3MW ECRH system at 105 GHz for WEST*

Timothy Goodman, Stefano Alberti, Jean-Philippe Hogge, Ioannis Pagonakis, François Jean Gaston Legrand

The aim of the WEST experiments is to master long plasma pulses (1000s) and expose ITER-like tungsten wall to deposited heat fluxes up to 10 MW/m2. To increase the margin to reach the H-Mode and to control W-impurities in the plasma, the installation of an ...

2023

Selectively Exciting and Probing Radiative Plasmon Modes on Short Gold Nanorods by Scanning Tunneling Microscope-Induced Light Emission

Olivier Martin

We study the plasmon modes of gold nanorods (as short as similar to 100 nm) on a nonmetallic conductive substrate using scanning tunneling microscope-induced light emission (STM-LE) with a nonplasmonic tungsten tip at room temperature in high vacuum (10-7 ...

AMER CHEMICAL SOC2023

Relaxation time shift of Cobalt related internal friction peak in WC-Co cemented carbide

Daniele Mari, Samy Adjam, Lucas Eric Jacques Degeneve

Cemented carbides are widely used in the cutting tools industry for their mechanical properties. They are composite materials made of hard tungsten carbide grains jointed together by a ductile cobalt binder. Due to the extreme conditions of use of the tool ...

ELSEVIER SCIENCE SA2022

FEM of stress partition during compression of WC-10 wt.% Co with realistic 3D morphology

Daniele Mari, Lucas Eric Jacques Degeneve

A Finite Element Model is developed to represent the mechanical behavior of WC-10 wt.% Co in compression tests. In this research, realistic three-dimensional model is obtained by slicing a sample by Focused Ion Beam and reconstituting it, resulting in two ...

ELSEVIER SCI LTD2022

In situ work function measurements of W, WO3 nanostructured surfaces

Francisco Sanchez

Surface nanostructuring enables the fabrication of materials with highly desirable properties. Nanostructured tungsten surfaces have potential applications in solar water splitting. Exposing a polished tungsten surface to helium plasma induces various surf ...

ELSEVIER SCIENCE SA2022

Processing and micro-mechanical characterization of multi-component transition MC carbides in iron

Andreas Mortensen, Léa Deillon, Goran Zagar, Marta Fornabaio, Lionel Michelet

We prepare multi-component transition monocarbides of chosen composition by arc-melting together a pre-alloy of the transition metals and cast iron. Based on the elements Ti, Ta, V, Nb and W, 51 different binary, ternary and quaternary compositions are pro ...

2021

Surface Oxygenate Species on TiC Reinforce Cobalt-Catalyzed Fischer-Tropsch Synthesis

Andreas Züttel, Wen Luo

Carbide-supported metal catalysts attract extensive research interests owing to the special properties of metal carbide and the interactions between metals and the carbide supports. While surface oxide species are inevitable in carbide materials, their rol ...

AMER CHEMICAL SOC2021

Systematic investigations of uranium carbide composites oxidation from micro- to nano-scale: Application to waste disposal

Nhât-Tân Vuong

The production of radioisotope beams at the ISOLDE (Isotope Separator OnLine DEvice) facility at CERN is achieved by irradiating target materials (e.g. uranium carbides and metal foils) with protons. The materials are usually operated at temperatures above ...

EPFL2021

Optimization of composition and structure of cemented carbide cutting tools

Samy Adjam

WC-Co cemented carbides are composites, which combine a hard phase consisting of WC grains and a metallic ductile phase as a binder. Their excellent mechanical properties, combining high hardness, toughness and refractory properties, make them excellent ma ...

EPFL2021

APT/TEM characterization of the element segregation in ferritic/martensitic steels after irradiation in SINQ

Lijuan Cui

Ferritic /martensitic (FM) steels are among the most important materials in various nuclear applications. As radiation-induced segregation (RIS) is one of the major factors for embrittlement of nuclear materials, thereofre it is essential to study the RIS ...

EPFL2021

Strain glass transition of cobalt phase in a cemented carbide

Daniele Mari, Thomas La Grange, Samy Adjam

Cemented carbides are hard materials used for the fabrication of cutting tools. They consist of hard micron or sub-micron carbide grains held together in a matrix of a tough metallic binder such as cobalt. The understanding and control of cobalt characteri ...

ELSEVIER SCI LTD2020

Modelling of tungsten erosion and deposition in the divertor of JET-ILW in comparison to experimental findings

Olivier Sauter, Basil Duval, Henri Weisen, Richard Pitts, Jonathan Graves, Ambrogio Fasoli, Stefano Coda, Yves Martin, Patrick Blanchard, Yann Camenen, Jan Horacek, Javier García Hernández, Duccio Testa, Marco Wischmeier, Nicola Vianello, Sun Hee Kim, Mikhail Maslov, Federico Nespoli, Alessandro Pau, David Pfefferlé, Davide Galassi, Antonio José Pereira de Figueiredo, Jonathan Marc Philippe Faustin, Liang Yao, Dalziel Joseph Wilson, Cristian Sommariva, Hamish William Patten, Samuel Lanthaler, Daniel Scott Alessi, Alberto Hernando de Castro, Julio Rodriguez

The erosion, transport and deposition of tungsten in the outer divertor of JET-ILW has been studied for an H-Mode discharge with low frequency ELMs. For this specific case with an inter-ELM electron temperature at the strike point of about 20 eV, tungsten ...

Elsevier2019

Visualization of supercritical water pseudo-boiling at Widom line crossover

Christian Ludwig, Andrea Testino

Supercritical water is a green solvent used in many technological applications including materials synthesis, nuclear engineering, bioenergy, or waste treatment and it occurs in nature. Despite its relevance in natural systems and technical applications, t ...

Nature Research2019

Coatings with tailored electronic and optical properties for advanced glazing

Olivia Valérie Charlotte Bouvard

Modern envelope glazing relies on nanoscale coatings to meet a range of specific needs. Low emissivity coatings can improve the thermal performance of glazing thanks to a thin metallic film. However, the conductive nature of this layer leads to an attenuat ...

EPFL2019

Mechanical properties of MC multimetallic carbides in steel

Lionel Michelet

Carbides constitute a class of materials used for many applications, where excellent mechanical properties, such as stiffness, hardness and fracture toughness, are required. The machining industry is a typical example where carbide are crucial materials. W ...

EPFL2018

The role of nanocrystalline binder metallic coating into WC after additive manufacturing

Jamasp Jhabvala, Eric Boillat

Tungsten carbide with microsized particle powders are commonly used embedded in a tough binder metal. The application of these composites is not limited to cutting tools, WC based material has been increasingly used in gaskets and other mechanical parts wi ...

Elsevier2018

Dust generation in tokamaks: Overview of beryllium and tungsten dust characterisation in JET with the ITER-like wall

Olivier Sauter, Martinus Adela Maria Gijs, Jonathan Graves, Ambrogio Fasoli, Stefano Coda, Basil Duval, Henri Weisen, Richard Pitts, Yves Martin, Javier García Hernández, Duccio Testa, Miguel Fernández Ruiz, Nicola Vianello, Robin Humphry-Baker, Sun Hee Kim, Federico Nespoli, Patrick Blanchard, Alessandro Pau, David Pfefferlé, Davide Galassi, Jonathan Marc Philippe Faustin, Cristian Sommariva, Hamish William Patten, Samuel Lanthaler, Jan Horacek, Yann Camenen, Bruno Emanuel Ferreira De Sousa Correia, José Pedro Rebelo Ferreira Marques, Mikhail Maslov, Marco Wischmeier, Dalziel Joseph Wilson, Liang Yao, Daniel Scott Alessi, Arnout Lodewijk M Beckers, Ana Francisca Leal Silva Soares, Jonnathan Cesar Hidalgo Acosta, Antonio José Pereira de Figueiredo, Partha Dutta, Pierre-Thomas Paul Brun, Pedro Camilo de Oliveira e Silva, Alberto Hernando de Castro, Julio Rodriguez, Vlad Trifa, Li Shuai, Rebecca Hill

Operation of the JET tokamak with beryllium and tungsten ITER-like wall provides unique opportunity for detailed studies on dust generation: quantity, morphology, location, etc. The programme carried out in response to ITER needs for safety assessment comp ...

2018

High Z neoclassical transport: Application and limitation of analytical formulae for modelling JET experimental parameters

Heavy impurities, such as tungsten (W), can exhibit strongly poloidally asymmetric density profiles in rotating or radio frequency heated plasmas. In the metallic environment of JET, the poloidal asymmetry of tungsten enhances its neoclassical transport up ...

2018

Correlation of surface chemical states with hydrogen isotope retention in divertor tiles of JET with ITER-Like Wall

To understand the fuel retention mechanism correlation of surface chemical states and hydrogen isotope retention behavior determined by XPS (X-ray photoelectron spectroscopy) and TDS (Thermal desorption spectroscopy), respectively, for JET ITER-Like Wall s ...

ELSEVIER SCIENCE SA2018

Ion cyclotron resonance heating for tungsten control in various JET H-mode scenarios

Jonathan Graves, Javier García Hernández

Ion cyclotron resonance heating (ICRH) in the hydrogen minority scheme provides central ion heating and acts favorably on the core tungsten transport. Full wave modeling shows that, at medium power level (4MW), after collisional redistribution, the ratio o ...

2017