Niels QuackProf. Dr. Niels Quack received the M.Sc. degree from Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland, in 2005, and the Dr.Sc. degree from Eidgenössische Technische Hochschule Zürich (ETH), Zürich, Switzerland, in 2010. From 2011 to 2015, he was Postdoctoral Researcher and Visiting Scholar with the Integrated Photonics Laboratory, Berkeley Sensor and Actuator Center, University of California, Berkeley, CA, USA. From 2014 to 2015, he was Senior MEMS Engineer with Sercalo Microtechnology, Neuchâtel, Switzerland. He is currently an SNSF Assistant Professor with Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland. He has authored and co-authored more than 50 papers in leading technical journals and conferences. His research interests include photonic micro and nanosystems, with an emphasis on diamond photonics and silicon photonic MEMS. He is Steering Committee Member of the IEEE International Conference on Optical MEMS and Nanophotonics (OMN) and served as General Chair of the IEEE OMN 2018 and the Latsis Symposium 2019 on Diamond Photonics. He is a Senior Member of IEEE, Member of The Optical Society (OSA) and life member of SPIE.
Graham KnottEnseignement et PhD Cours Methods: from disease models to therapy BIOENG-518 Ce cours décrira les méthodes qui sont à la base des approches translationnelles depuis la génération et la caractérisation des modèles des maladies jusqu'aux applications thérapeutiques. Les bases théoriques seront complétées par des rotations pratiques dans les plateformes technologiques.
Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Enseignement et PhD Doctorant·es actuel·les Nicola Carrara, Berlind Vosberg, Maja Lopandic, Sneha Cheriyamparambil, Thanh Thi Hà Lê, Suqiu Jiang, Adam William Woodhouse, Kunita Numabe A dirigé les thèses EPFL de Stefano Tugulu, Markus Scholl, Harald Nuhn, Nadja Franz, Raphaël Barbey, Bojana Portmann, Maarten Danial, Dusko Paripovic, Sanhao Ji, Nicolas Bertrand Schüwer, Zuzana Kadlecova, Görçin Görkem Sahin Kurtuldu, Caroline Sugnaux, Sole
Christophe BallifChristophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.
Christophe MoserChristophe Moser is Associate Professor of Optics and the Section Director in the Microengineering department at EPFL. He obtained his PhD at the California Institute of Technology in optical information processing in 2000. He co-founded and was the CEO of Ondax Inc (acquired by Coherent Inc.), Monrovia California for 10 years before joining EPFL in 2010. His current interests are ultra-compact endoscopic optical imaging through multimode fibers, multimode fiber lasers, retinal imaging and additive manufacturing via volumetric 3D printing with light. He is the co-founder of Composyt light lab in the field of head worn displays in 2014 (acquired by Intel Corp), Earlysight SA and Readily3D. He is the author and co-author of 75 peer reviewed publications and 45 patents.
Giovanni De MicheliExpertise
Technologies de conception pour les systèmes intégrés, tels que la synthèse, le codesign de HW/SW et la conception de basse puissance. Technologies de conception des systèmes sur les plateformes hétérogènes comprenant les composants électriques, et biologiques.
En savoir plus
Consulter svp http://si2.epfl.ch/~demichel/
Enseignement et PhD A dirigé les thèses EPFL de Abhishek Garg, Mohamed Haykel Ben Jamaa, Francesco Zanini, Ciprian Seiculescu, Cristina Boero, Hu Xu, Andrea Cavallini, Shashi Kanth Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Jeremy Luterbacher
- Masters degree in Chemical Engineering obtained in 2007 at the Swiss Federal Institute of Technology, Lausanne (EPFL) (enrolled fall 2005, currently in 3rd semester). Relevant courses: Advanced Separation Processes, Advanced Chemical Reaction Engineering, Process Development and Polymer Chemistry and Macromolecular Engineering. - Bachelors degree in Chemistry and Chemical Engineering obtained in 2005 at the Swiss Federal Institute of Technology, Lausanne (EPFL). Relevant courses: Transport phenomena, Separation processes, Process command, Applied Energetics, Chemical Reaction Engineering, Chemical Kinetics, Quantum chemistry and Thermodynamics. - High school Maturity completed at the Nyon High School, 2002 (major subjects: biology-chemistry, advanced math, and Latin). Maturity essay completed 12-2001 with distinction - Secondary School certificate obtained in 1999 at the Gland secondary School, Latin-Greek section
Daniel SageExpertise
Publications
Enseignement et PhD A co-dirigé les thèses EPFL de Daniel Andreas Schmitter, Anaïs Badoual, Laurène Donati Cours Bioimage informatics BIO-410 Le cours fournit une complète revue des méthodes, algorithmes et des outils logiciels utilisés en analyse d'images biologiques. Il expose les concepts fondamentaux et les solutions informatiques permettant d'extraire des informations quantitatives à partir d'images multidimensionnelles. Fundamentals of Image Analysis EE
Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
