Raffaella BuonsantiEnseignement et PhD Doctorant·es actuel·les Riya Gupta, Jennifer Calderon Mora, Coline Boulanger, Moritz Tritschler, Marco Fabbiano, Seyedmohamadjavad Chabok, Hugh Andrew Warkentin A dirigé les thèses EPFL de Chethana Janardhana Gadiyar, Seryio Saris, Valeria Mantella, Seyedehbehnaz Varandili, Pranit Srinivas Iyengar, Yannick Thomas Guntern, Jan Vávra, Laia Castilla Amorós, Valery Okatenko, Ona Segura Lecina, Ludovic Emile Frédy Zaza, Petru Pasquale Albertini Cours Introduction au génie chimique et à l'
Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
Andres Osorio SalazarExpertise
Robotics, advanced actuator design, soft actuators, sensor design, embedded systems, human-machine interface architecture, electronic-less control, mechanism design, additive and traditional manufacturing, industrial automation, process control, and fluid robotics.
Current Work
Smart Footwear for Diabetic Foot Care and Ulcer PreventionEvery 20 seconds, a person with diabetes has to face an amputation somewhere in the world. The main risk factor is high plantar pressure combined with foot nephropat
Daniel Alexander Florez OrregoEnseignement et PhD Doctorant·es actuel·les Vibhu Baibhav Cours Advanced energetics ME-451 Méthodes pour l'utilisation rationnelle et la conversion de l'énergie dans les processus industriels: comment analyser l'utilisation de l'énergie, calculer la récupération de chaleur par analyse de pincement, définir le réseau d'échangeurs thermiques et réaliser une analyse exergétique.
Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Enseignement et PhD Doctorant·es actuel·les Nicola Carrara, Berlind Vosberg, Maja Lopandic, Sneha Cheriyamparambil, Thanh Thi Hà Lê, Suqiu Jiang, Adam William Woodhouse, Kunita Numabe A dirigé les thèses EPFL de Stefano Tugulu, Markus Scholl, Harald Nuhn, Nadja Franz, Raphaël Barbey, Bojana Portmann, Maarten Danial, Dusko Paripovic, Sanhao Ji, Nicolas Bertrand Schüwer, Zuzana Kadlecova, Görçin Görkem Sahin Kurtuldu, Caroline Sugnaux, Sole
Olivier VerscheureEnseignement et PhD Cours Data science pour ingénieurs avec Python ENG-209 Ce cours propose une immersion progressive et complète dans le domaine de la Data Science à travers le langage Python. Il guide les étudiants depuis la manipulation de données brutes jusqu'à la modélisation et l'extraction de connaissances utiles à partir de données réelles. Large-scale data science for real-world data COM-490 Ce cours pratique couvre outils et méthodes des data scientists, de la reche
Marco PicassoExpertise
Computational Science and Engineering
Mission
I am teaching analysis and numerical analysis for engineers and mathematicians at bachelor and master levels.My research pertains to the numerical simulation of complex physical systems with partial differential equations.Here is some bibliometry: Google Scholar, Research Gate, Orcid, here is my most recent CV. Ongoing research projects: - Numerical simulation of aluminium electrolysis, collaboration with RioTinto LRF lab, Ycoorsystems SA and Jacques
Zhaoming QinEducation M.Sc | Control Scince and Engineering 2019 – 2022 Tsinghua University B.Eng | Automation 2015 – 2019 Beihang University
Mohamed BouriDr. Mohamed Bouri is a group leader of Rehabilitation and Assistive Robotics in LSRO and lecturer of Robotics and Industrial Robotics. He graduated in Electrical Engineering in 1992 and obtained his PhD degree in 1997 in Industrial Automation at INSA LYON, France. Since 1997, he is at EPFL and is mainly active in the field of robot control, automation and robot design for medical and industrial applications. He is the head of Rehabilitation and Assistive Robotics group since 2005 and has strong references with the development of robotic devices for lower limb rehabilitation : The MotionMaker and WalkTrainer commercialzed by the company Swortec. His ongoing research currently focuses on the development of exoskeletons and the associated control strategies. His main current projects are TWIICE, a lower limb exoskeleton for people with paraplegia, AUTONOMYO, a walk assistance exoskeleton for people with muscle weakness, and the HiBSO, a hip orthosis for elderly.
Sylvain CalinonExpertise
robot learning, human-robot collaboration, optimal control, model-based optimization
I am a Senior Research Scientist at the Idiap Research Institute and a Lecturer at EPFL, with research interests covering robot learning, optimal control, geometrical approaches, and human-robot collaboration. My work focuses on human-centered robotics applications in which the robots can acquire new skills from only few demonstrations and interactions. It requires the development of models that can exploit the st
Giovanni De MicheliExpertise
Technologies de conception pour les systèmes intégrés, tels que la synthèse, le codesign de HW/SW et la conception de basse puissance. Technologies de conception des systèmes sur les plateformes hétérogènes comprenant les composants électriques, et biologiques.
En savoir plus
Consulter svp http://si2.epfl.ch/~demichel/
Enseignement et PhD A dirigé les thèses EPFL de Abhishek Garg, Mohamed Haykel Ben Jamaa, Francesco Zanini, Ciprian Seiculescu, Cristina Boero, Hu Xu, Andrea Cavallini, Shashi Kanth Francesco StellacciFrancesco Stellacci graduated in Materials Engineering at the Politecnico di Milano in 1998 with a thesis on photochromic polymers with Prof. Giuseppe Zerbi and Mariacarla Gallazzi. In 1999 he moved to the Chemistry Department of the University of Arizona for as a post-doc in the group of Joe Perry in close collaboration with the group of Seth Marder. In 2002 he moved to the Department of Materials Science and Engineering at the Massachusetts Institute of Technology as an assistant professor. He was then promoted to associate without (2006) and with tenure (2009). In 2010 he moved to the Institute of Materials at EPFL as a full Professor. He holds the Alcan EP Chair. Francesco was one of the recipients of the Technology Review TR35 "35 Innovator under 35" award in 2005, and the Popular Science Magazine "Brilliant 10" award in 2007. He has been a Packard Fellow starting 2005.
David Atienza AlonsoDavid Atienza Alonso is an associate professor of EE and director of the Embedded Systems Laboratory (ESL) at EPFL, Switzerland. He received his MSc and PhD degrees in computer science and engineering from UCM, Spain, and IMEC, Belgium, in 2001 and 2005, respectively. His research interests include system-level design methodologies for multi-processor system-on-chip (MPSoC) servers and edge AI architectures. Dr. Atienza has co-authored more than 350 papers, one book, and 12 patents in these previous areas. He has also received several recognitions and award, among them, the ICCAD 10-Year Retrospective Most Influential Paper Award in 2020, Design Automation Conference (DAC) Under-40 Innovators Award in 2018, the IEEE TCCPS Mid-Career Award in 2018, an ERC Consolidator Grant in 2016, the IEEE CEDA Early Career Award in 2013, the ACM SIGDA Outstanding New Faculty Award in 2012, and a Faculty Award from Sun Labs at Oracle in 2011. He has also earned two best paper awards at the VLSI-SoC 2009 and CST-HPCS 2012 conference, and five best paper award nominations at the DAC 2013, DATE 2013, WEHA-HPCS 2010, ICCAD 2006, and DAC 2004 conferences. He serves or has served as associate editor of IEEE Trans. on Computers (TC), IEEE Design & Test of Computers (D&T), IEEE Trans. on CAD (T-CAD), IEEE Transactions on Sustainable Computing (T-SUSC), and Elsevier Integration. He was the Technical Program Chair of DATE 2015 and General Chair of DATE 2017. He served as President of IEEE CEDA in the period 2018-2019 and was GOLD member of the Board of Governors of IEEE CASS from 2010 to 2012. He is a Distinguished Member of ACM and an IEEE Fellow.
Tuong-Van NguyenEnseignement et PhD Cours Energy conversion and renewable energy ME-409 Le cours donne un aperçu (i) du système énergétique actuel, (ii) des principes techniques des systèmes de conversion d'énergie (fossiles, nucléaires et renouvelables), et (iii) de leurs aspects économiques et environnementaux. La transition énergétique : défis et opportunités HUM-293 Ce cours porte sur la transition énergétique d'un système fondé sur les énergies fossiles vers un modèle reposant sur des s
Pedro Correa FernandezPedro Correa Fernández is a Doctoral Candidate in Architecture at Columbia GSAPP. Before joining GSAPP, he was an adjunct professor at the Architecture School of Universidad Católica de Chile where he taught seminars and lectures on architecture history and related epistemological, aesthetic, and political issues. His current work examines the mediations between technical knowledge, artisanal crafts, and global industrial capitalism in early nineteenth-century Latin America.Pedro holds an architecture degre
Dario FloreanoProf. Dario Floreano is director of the Laboratory of Intelligent Systems at the Swiss Federal Institute of Technology Lausanne (EPFL). Since 2010, he is the founding director of the Swiss National Center of Competence in Robotics, a research program that brings together more than 20 labs across Switzerland. Prof. Floreano holds an M.A. in Vision, an M.S. in Neural Computation, and a PhD in Robotics. He has held research positions at Sony Computer Science Laboratory, at Caltech/JPL, and at Harvard University. His main research interests are Robotics and A.I. at the convergence of biology and engineering. Prof. Floreano made pioneering contributions to the fields of evolutionary robotics, aerial robotics, and soft robotics. He served in numerous advisory boards and committees, including the Future and Emerging Technologies division of the European Commission, the World Economic Forum Agenda Council, the International Society of Artificial Life, the International Neural Network Society, and in the editorial committee of several scientific journals. In addition, he helped spinning off two drone companies (senseFly.com and Flyability.com) and a non-for-profit portal on robotics and A.I. (RoboHub.org). Books
Manuale sulle Reti Neurali, il Mulino (in Italian), 1996 (first edition), 2006 (second edition)Evolutionary Robotics, MIT Press, 2000
Bio-Inspired Artificial Intelligence, MIT Press, 2008
Flying Insects and Robots, Springer Verlag, 2010
Christian Ludwig2005 - today: Adjunct Professor at EPFL in the field of Solid Waste Treatment and head of the Chemical Processes and Materials research group (CPM) at Paul Scherrer Institute (PSI). Joint EPFL-PSI Professorship on Solid Waste Treatment. 2000 - today: Head, Group of Chemical Processes and Materials (CPM) at Paul Scherrer Institut (PSI). In 2009 the LEM unit was closed and the CPM group is now affiliated to the Bioenergy and Catalysis Laboratory (LBK) of the Energy and Environment Research Division (ENE). Since June 2002 permanent position ("tenure"). 1997 - 1999: Senior Scientist. Paul Scherrer Institut (PSI), General Energy Research Department, Element Cycles Section. 1995 - 1997: Research Fellow. Swiss Federal Institute for Environmental Science and Technology (EAWAG), Department of Resource and Waste Management. 1993 - 1995: Post-doc Fellow. University of California Davis, Department of Land, Air, and Water Resources (LAWR). 1990 - 1993: PhD Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry. 1989 - 1990: Master Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry.
