Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Réservoir sous pression

Publications associées (25)

On the influence of flow-front orientation on stringer stiffened composite panels in water impacts

Véronique Michaud

Water impacts form the critical load case for high-performance carbon fibre reinforced polymer (CFRP) racing craft. Such events produce a peaked, non-uniform pressure distribution that travels along a hull panel as it is immersed. Current design standards ...

2024

Bounding the localized to ductile transition in porous rocks: implications for geo-reservoirs

Marie Estelle Solange Violay, Gabriel Gérard Dominique Meyer

Porous rocks have long been the focus of intense research driven by their importance in our society as host to our most essential resources (oil, gas, water, geothermal energy, etc), yet their rheology remains poorly understood. With increasing depth, poro ...

2023

Bottom-Pressure Development Due to an Abrupt Slope Reduction at Stepped Spillways

Anton Schleiss, Michael Pfister, José Pedro Gamito de Saldanha Calado Matos, Mohammad Javad Ostad Mirza

Fluctuating bottom-pressures on stepped chutes are relevant for the spillway design. An abrupt slope reduction causes a local alteration of the bottom-pressure development. Little information is available regarding the air–water flow properties near an abr ...

2022

Preliminary design of the pressure relief system of the EDIPO 2 helium vessel

Pierluigi Bruzzone, Kamil Sedlák, Xabier Sarasola Martin, Roberto Guarino, Evgeny Solodko

The European Dipole (EDIPO) test facility is undergoing a major upgrade of its magnet assembly, which will provide ground for testing both fusion and high-energy physics superconducting samples at variable temperature and with a background field of 15 T. I ...

2022

Particle Size Effects in Ru/CNF Catalysts during Supercritical Water Gasification of Glycerol

Oliver Kröcher, Frédéric Vogel

Ru/CNF catalysts of different Ru nanoparticle (NP) sizes (0.9-2.7 nm) were assessed for their performance in continuous supercritical water gasification (SCWG) of glycerol. A structure sensitivity of Ru was demonstrated, with high initial turnover frequenc ...

2022

Simulating Infiltration as a Sequence of Pinning and De-pinning Processes

Andreas Mortensen, William Craig Carter

The infiltration of a non-wetting liquid, such as molten metal, into a porous solid, such as a ceramic preform, is influenced by the wetting angle of the liquid on the solid. The link between local wetting and the minimum pressure required for initiation o ...

2021

Deep Boltzmann Machines: Rigorous Results at Arbitrary Depth

Emanuele Mingione, Diego Alberici

A class of deep Boltzmann machines is considered in the simplified framework of a quenched system with Gaussian noise and independent entries. The quenched pressure of a K-layers spin glass model is studied allowing interactions only among consecutive laye ...

2021

Magneto-active elastic shells with tunable buckling strength

Pedro Miguel Nunes Pereira de Almeida Reis, Matteo Pezzulla, Dong Yan, Arefeh Abbasi

Shell buckling is central in many biological structures and advanced functional materials, even if, traditionally, this elastic instability has been regarded as a catastrophic phenomenon to be avoided for engineering structures. Either way, predicting crit ...

Nature Research2021

Spalling of concrete cover induced by reinforcement

Aurelio Muttoni, Miguel Fernández Ruiz, Francesco Rafael Alberto Moccia

This paper investigates the phenomenon of cover spalling in reinforced concrete induced by bond or by the action of an inner pressure. This research is based on an experimental programme comprising a series of bond tests and a series of tests with inner-pr ...

2021

First observation of spalling in tantalum at high temperatures induced by high energy proton beam impacts

Philippe Spätig, Elvis Fornasiere

Spalling in tantalum has been observed in an experiment aiming at testing an antiproton production target prototype at CERN’s HiRadMat Facility. The experiment consisted in impacting 47 intense and high-energy proton beams onto a target equipped with ten c ...

2020

Nondestructive Prediction of the Buckling Load of Imperfect Shells

Tobias Schneider, Emmanuel Georges Albert Virot, Emilio José Lozano Vazquez

From soda cans to space rockets, thin-walled cylindrical shells are abundant, offering exceptional load carrying capacity at relatively low weight. However, the actual load at which any shell buckles and collapses is very sensitive to imperceptible defects ...

2020

In situ control of the helical and skyrmion phases in Cu2OSeO3 using high-pressure helium gas up to 5 kbar

Henrik Moodysson Rønnow, Arnaud Magrez, Ivica Zivkovic, Jonathan White

We report a small-angle neutron scattering study of the helical and skyrmion lattice order in single-crystal Cu2OSeO3 under quasihydrostatic helium gas pressures up to 5 kbar. By using helium gas as the pressure-transmitting medium (PTM) we ensure pressure ...

AMER PHYSICAL SOC2020

Effect of dynamic strain ageing on environmental degradation of fracture resistance of low-alloy RPV steels in high-temperature water environments

Philippe Spätig, Hans-Peter Seifert, Zaiqing Que

Elastic plastic fracture mechanics tests on different low-alloy reactor pressure vessel (RPV) steels in air and various simulated light water reactor environments revealed a clear, but moderate reduction of the fracture initiation resistance of RPV steels ...

2019

Mechanics of a pressure-controlled adhesive membrane for soft robotic gripping on curved surfaces

Jamie Paik, Metin Sitti, Sukho Song

This paper aims at understanding the adhesion mechanics of a pressure-controlled adhesive thin elastomeric membrane for soft robotic gripping on non-planar, curved surfaces. The adhesive elastic membrane is lined with gecko-inspired microfiber arrays and c ...

2019

High-Temperature Water Effects on the Fracture Behaviour of Low-Alloy Reactor Pressure Vessel Steels

Zaiqing Que

The structural integrity of the reactor pressure vessel (RPV) of light water reactors (LWR) is of utmost importance regarding operation safety and lifetime. High-temperature water (HTW) and hydrogen absorbed from environment, in synergy with irradiation em ...

EPFL2019

The Interplay of In Situ Stress Ratio and Transverse Isotropy in the Rock Mass on Prestressed Concrete-Lined Pressure Tunnels

Anton Schleiss

This paper presents the mechanical and hydraulic behaviour of passively prestressed concrete-lined pressure tunnels embedded in elastic transversely isotropic rocks subjected to non-uniform in situ stresses. Two cases are distinguished based on whether the ...

Springer Wien2016

Frequency Analysis of Finite Steel Cylinders and their Comparison to Complex Cylinder-like Targets using an Electromagnetic Induction Sensor

Yves Perriard, Christian Köchli, Chafic Abu Antoun

This paper shows that the standard industrial targets that need to be detected using an electromagnetic induction sensor cannot be represented by their exact size definition in international standards. Reinforcing steel with defined 16mm diameter according ...

IEEE2015

Air entrainment and pressure development in skimming flow on an abrupt slope change on stepped spillways

Anton Schleiss, Michael Pfister, José Pedro Gamito de Saldanha Calado Matos, Mohammad Javad Ostad Mirza

Numerous stepped spillways were built to date, namely on RCC gravity dams or on valley flanks besides embankment or rockfill dams, while some others are currently under design or construction. In some cases, slope changes may be required on stepped chutes, ...

2015

Fabrication of Biocompatible Monolithic Microchannels with High Pressure-Resistance Using Direct Polymerization of PEG-Modified PMMA

Martinus Adela Maria Gijs, Ata Tuna Ciftlik, Elena Bianchi

Withstanding high pressures in polymeric microchannels is an important requirement for many biological applications. Here, a simple direct polymerization through a polyester photomask is applied to obtain monolithic polyethylene glycol (PEG)-modified poly( ...

Wiley-Blackwell2014

Comparisons between reduced order models and full 3D models for fluid-structure interaction problems in haemodynamics

Alfio Quarteroni, Simone Deparis, Claudia Maria Colciago

When modelling the cardiovascular system, the effect of the vessel wall on the blood flow has great relevance. Arterial vessels are complex living tissues and three-dimensional specific models have been proposed to represent their behaviour. The numerical ...

Elsevier2014