Publications associées à Process engineering

Publications associées (25)

How to Decarbonize Our Energy Systems: Process-Informed Design of New Materials for Carbon Capture

Decarbonisation from a variety of industrial and power emission sectors highlights a marked need for capture technologies that can be optimized for different CO2 sources and integrated into an equally diverse range of applications of captured CO2 as a feed ...

WILEY-V C H VERLAG GMBH2023

Process-informed adsorbent design guidelines for direct air capture

Berend Smit

Direct air capture using solid adsorbents is a proven technology critical to reducing our net greenhouse gas emissions to zero and beyond. Currently, academic research into the technology mainly focuses on the devel-opment of new adsorbents. However, there ...

ELSEVIER SCIENCE SA2022

Increasing Superstructure Optimization Capacity Through Self-Learning Surrogate Models

François Maréchal, Ivan Daniel Kantor, Julia Granacher

Simulation-based optimization models are widely applied to find optimal operating conditions of processes. Often, computational challenges arise from model complexity, making the generation of reliable design solutions difficult. We propose an algorithm fo ...

2021

Exergy and exergoeconomic analyses of sustainable furfural production via reactive distillation

François Maréchal

Lignocellulosic biomass is a potential renewable resource for production of high-value, sustainable products. Furfural is among the important bio-based chemicals in biorefineries. However, the conventional process of furfural production using a reaction-se ...

2021

Cryogenic MOSFET Modeling for Large-Scale Quantum Computing

Arnout Lodewijk M Beckers

Promising results of state-of-the-art quantum computers fuel a world-wide effort in academic and private research laboratories to scale up the number of qubits and improve their characteristics in large arrays. To meet the scale-up challenge, innovative mi ...

EPFL2021

Fabrication of zipping electrostatic actuators incorporating inkjet-printed layers

Herbert Shea, Samuel Rosset, Giulio Grasso

Zipping electrostatic actuators operate by bending flexible electrodes using electrostatic forces. This principle allows the use of a wide range of dielectric and conductive materials. Additive Manufacturing (AM) techniques can be used to fabricate these a ...

SPIE-INT SOC OPTICAL ENGINEERING2021

The Industrialization of Astronomical Instrumentation: An Industrial Systems and Process Engineering Perspective

Jean-Paul Richard Kneib, Mohamed Bouri, Luzius Gregor Kronig, Ricardo Jorge Araùjo Pereira, Loïc Grossen

The Sloan Digital Sky Survey V (SDSS-V) is an all-sky spectroscopic survey of > 6 million objects, designed to decode the history of the Milky Way, reveal the inner workings of stars, investigate the origin of solar systems, and track the growth of superma ...

SPIE-INT SOC OPTICAL ENGINEERING2020

Natural iron ligands promote a metal-based oxidation mechanism for the Fenton reaction in water environments

César Pulgarin, Stefanos Giannakis

The Fenton reaction is an effective advanced oxidation process occurring in nature and applied in engineering processes toward the degradation of harmful substances, including contaminants of emerging concern. The traditional Fenton application can be rema ...

ELSEVIER2020

Synthesis of Heat-Integrated Water Allocation Networks: A Meta-Analysis of Solution Strategies and Network Features

François Maréchal, Ivan Daniel Kantor, Maziar Kermani

Industries consume large quantities of energy and water in their processes which are often considered to be peripheral to the process operation. Energy is used to heat or cool water for process use; additionally, water is frequently used in production supp ...

2018

Optimal Load Sharing for Serial Compressors via Modifier Adaptation

Dominique Bonvin, Timm Faulwasser, Predrag Milosavljevic, René Uwe Schneider

This paper investigates the optimal load-sharing problem of serial gas compressors in the presence of plant-model mismatch. The problem is formulated as a static real-time optimization task that is solved via modifier adaptation for interconnected systems. ...

IEEE2018

Improvement of contact resistance in flexible a-IGZO thin-film transistors by CF4/O-2 plasma treatment

Alain Yuji Takabayashi

In this work, we analyze the effect of CF4/O-2 plasma treatment on the contact interface between the amorphous Indium-Gallium-Zinc-Oxide (a-IGZO) semiconductor and Titanium-Gold electrodes. First, the influence of CF4/O-2 plasma treatment is evaluated usin ...

PERGAMON-ELSEVIER SCIENCE LTD2018

Ultrafast Laser to Tailor Material Properties: An Enabling Tool in Advanced Three-dimensional Micromanufacturing

Yves Bellouard

The progress made in ultrafast laser technology towards high repetition rate systems have opened new opportunities in micromanufacturing. Non-linear absorption phenomena triggered by femtosecond pulses interacting with transparent materials allow material ...

Swiss Chemical Soc2017

Foam on troubled water: Capillary induced finite-time arrest of sloshing waves

François Gallaire, Pierre-Thomas Paul Brun, Francesco Viola

Interfacial forces exceed gravitational forces on a scale small relative to the capillary length-two millimeters in the case of an air-water interface-and therefore dominate the physics of sub-millimetric systems. They are of paramount importance for vario ...

Amer Inst Physics2016

GREEN DENSITY. A Transdisciplinary Research and Teaching Project for the Design of Sustainable Neighbourhoods

Emmanuel Rey, Sophie Lufkin

The GREEN DENSITY transdisciplinary research and teaching project focuses on the Waldstadt sector, a strip of forest bordering the city of Bern. This strategic site, likely to host new inhabitants and jobs close to public transport, is particularly adapted ...

2016

Economical Analysis of a Pressurized Fluid-Based Process Applied for Phytochemicals Recovery in a Sustainable Biorefinery Concept for Brazilian Ginseng Roots

François Maréchal

A growing number of technologies are being developed in order to produce different high added value products, such as phytochemicals, ethanol and other chemicals from biomass, representing an important trend that needs to be evaluated. The use of pressuriz ...

Aidic Servizi Srl2016

Predictive Models for Thermal Stability and Explosive Properties of Chemicals from Molecular Structure

Nadia Baati

Industrial chemical processes may involve thermal risks as most of the reactions performed are exothermic, the chemicals used are often thermally unstable, and the operating conditions are set to induce high conversion and throughput. Besides the reactive ...

EPFL2016

Functional Central Limit Theorem for the Interface of the Symmetric Multitype Contact Process

Thomas Mountford, Daniel Rodrigues Valesin

We study the interface of the symmetric multitype contact process on Z. In this process, each site of Z is either empty or occupied by an individual of one of two species. Each individual dies with rate 1 and attempts to give birth with rate 2R lambda; the ...

Impa2016

Biomass Modelling: estimating thermodynamic properties from the elemental composition

François Maréchal, Emanuela Peduzzi

In the context of modelling biomass conversion processes, the accurate representation of biomass, which is a complex and highly variable material, is of crucial importance. This study provides a rather simple and flexible way to represent biomass, especial ...

2016

Combined water and energy integration in industrial processes with restricted connections

François Maréchal, Ivan Daniel Kantor, Maziar Kermani

Reducing the environmental impact of industrial processes is highly linked with decreasing consumption of natural resources, energy, and water. In the context of climate change, as discussed during the Conference of Parties in Paris (COP21), the efficient ...

2016

Multiperiod Sequential Synthesis of Heat Exchanger Networks and Utility Systems including storages

François Maréchal, Alberto Mian

This work proposes a sequential approach for the multi-period synthesis of Heat Exchanger Networks (HEN) and Utility Systems of chemical processes and energy systems, including thermal, electric and material storage. The optimization approach is sequential ...

2016