Véronique MichaudBackground: 1994 Habilitation à diriger des recherches ( INPG, France) 1991 PhD in Materials Engineering ( MIT, USA) 1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France) Activités: Depuis Janvier 2018: Vice-Doyenne de la faculté des ingénieurs, en charge de l'éducation. Juin 2012-Dec.2017: Directrice de la Section Science et Génie des Matériaux Depuis Avril 2017, Professeur Associée EPFL 2009-2017 : Professeur Titulaire at EPFL 1997-2009 : collaboratrice Scientifique EPFL 1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France) 1991-1994 : Post-doctoral research associate, MIT (USA) Environ 300 publications of which 140 in peer-reviewed journals
Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
Pablo José Donet GarciaEnseignement et PhD Cours Théorie et critique du projet BA5 (DOSCRE) AR-301(aw) L'Urbanisme Typologique fait le lien entre architecture et urbanisme au travers d'une double perspective: les typologies architecturales qui forment la ville et les types urbains qui la structurent. Travaillant à plusieurs échelles, le studio explore le contexte urbain suisse en constante évolution. Théorie et critique du projet BA6 (DOSCRE) AR-302(aw) L'Urbanisme Typologique fait le lien entre ar
Tanja ReimerEnseignement et PhD Cours Théorie et critique du projet BA5 (DOSCRE) AR-301(aw) L'Urbanisme Typologique fait le lien entre architecture et urbanisme au travers d'une double perspective: les typologies architecturales qui forment la ville et les types urbains qui la structurent. Travaillant à plusieurs échelles, le studio explore le contexte urbain suisse en constante évolution. Théorie et critique du projet BA6 (DOSCRE) AR-302(aw) L'Urbanisme Typologique fait le lien entre ar
Dimitrios LignosProf. Lignos joined the École Polytechnique Féderale de Lausanne (EPFL) in 2016 from McGill University in Canada where he was a tenured Associate Professor and a William Dawson Scholar for Infrastructure Resilience. He holds a diploma (National Technical University of Athens, NTUA, 2003), M.S. (Stanford University, 2004) and Ph.D. (Stanford University, 2008). In addition, he was a post-doctoral scientist at Stanford University (2009) and in Kyoto University (2010). Prof. Lignos teaches graduate and undergraduate courses in seismic design, nonlinear behaviour of steel and composite structures as well as supplemental damping systems, Structural Stability, Nonlinear Analysis and Performance-based Earthquake Engineering. His awards for teaching, research and service in Civil Engineering include the 2011 Outstanding Teaching Award (Faculty of Engineering, McGill University), as well as the Outstanding reviewer (2012, 2013) award from ASCE, the 2013 State-of-the-Art in Civil Engineering Award by ASCE and the 2014 Christophe Pierre Award for Research Excellence - Early Career. Just recently, he received the 2019 Walter L. Huber Civil Engineering Research Prize from ASCE for significant contributions in developing state of the art methods to simulate extreme limit states in steel structures.Prof. Lignos is a member of ASCE and the Earthquake Engineering Research Institute. He acts as an Associate Editor for Metal Structures and Seismic Effects of the ASCE Journal of Structural Engineering. He joined the Editorial Board of Earthquake Spectra and Earthquake Engineering and Structural Dynamics International journals. He serves as an acting member of the CEN/TC 250/SC 8/WG 2 and has been selected as a member of the Project Team (PT2) for the Eurocode 8-Part 1 Current Revisions for Steel and Composite Structures. He is also a member of the Canadian Standards Association (CSA) S16 technical committee for Steel Structures. Prof. Lignos is involved as a NEHRP consultant in numerous research-to-practice projects related to the behaviour and nonlinear modelling and analysis of structures applicable to the engineering practice through the Applied Technology Council (ATC). Detailed Curriculum Vitae (last update September 2018)
Sandrine GerberSandrine Gerber studied chemistry at the "Ecole Nationale Supérieure de Chimie de Paris" in France, where she obtained a diploma of chemical engineer in 1993. The same year she obtained a DEA (Master degree) of organic chemistry at the University Pierre et Marie Curie (Paris VI, France). From 1993 to 1996 she did a PhD in organic chemistry under the supervision of Prof. Jean-Pierre Genêt at the Ecole Nationale Supérieure de Chimie de Paris. In 1996, she moved to University of Lausanne for a post-doctoral stay under the supervision of Prof. Pierre Vogel. In 1998, she was appointed Maître-Assistante at the Institute of Organic Chemistry in the University of Lausanne. In 2003, she obtained the habilitation to direct research from the University Pierre et Marie Curie (Paris VI, France). The same year, she was appointed scientific adjunct at the EPFL and senior scientist (Maître d'Enseignement et de Recherche) in 2006. In December 2014, she was promoted to titular professor. Since September 2007, Sandrine Gerber is deputy to the director of the Institute of Chemical Sciences and Engineering (ISIC). She is also member of the Board of Directors of the Swiss Chemical Society. Since 2007, Sandrine Gerber is part-time lecturer at the university of Fribourg. She was awarded the Prize Eugene Schueller in 1997, the Prize Dufour for prospective organic chemistry in 2005 and the Werner Prize 2010. She also received a special mention in recognition of exceptional quality of pedagogic competencies in the teaching of basic sciences, given by the Direction of the School of Biology and Medicine from the University of Lausanne, in 2013. In October 2018, she will receive the Prize for Excellence in Teaching from the section of Chemistry and Chemical Engineering.
Eugen BrühwilerExpertise
structural and material engineering of existing civil structures in particular bridges of high cultural value; fatigue, dynamics and structural behaviour of bridges; Ultra-high performance fiber reinforced cementitious composites and composite UHPFRC - RC structures.
Expertise
structural and material engineering of existing civil structures in particular bridges of high cultural value; fatigue, dynamics and structural behaviour of bridges; Ultra-high performance fiber reinforced cementitious compo
Pablo Antolin SanchezEnseignement et PhD Doctorant·es actuel·les Philipp Christoph Weder, Davor Dobrota A co-dirigé les thèses EPFL de Ondine Chanon Cours Analysis III MATH-202(c) Le cours étudie les concepts fondamentaux de l'analyse vectorielle et de l'analyse de Fourier-Laplace en vue de leur utilisation pour résoudre des problèmes pluridisciplinaires d'ingénierie scientifique. Analysis III (for IC) MATH-203(d) Le cours étudie les concepts fondamentaux de l'analyse vectorielle et de l'analys
Arnaud BertschExpertise
MicrostereolithographiePhotopolymersMicrofabrication
Enseignement et PhD Doctorant·es actuel·les Tao Zhang, Pol Torres Vila, Nicolas Bruno Minazzo A co-dirigé les thèses EPFL de Joan Teixidor, Clémentine Sophie Sarah Lipp, Nicolas Grégoire Maïno, Jiande Zhou, Jongeon Park Cours Advanced microfabrication practicals MICRO-373 Ce TP permet une formation approfondie sur les méthodes avancées de micro et nanofabrication dans un environnement de salle blanche pour des applications séle
Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Dario FloreanoProf. Dario Floreano is director of the Laboratory of Intelligent Systems at the Swiss Federal Institute of Technology Lausanne (EPFL). Since 2010, he is the founding director of the Swiss National Center of Competence in Robotics, a research program that brings together more than 20 labs across Switzerland. Prof. Floreano holds an M.A. in Vision, an M.S. in Neural Computation, and a PhD in Robotics. He has held research positions at Sony Computer Science Laboratory, at Caltech/JPL, and at Harvard University. His main research interests are Robotics and A.I. at the convergence of biology and engineering. Prof. Floreano made pioneering contributions to the fields of evolutionary robotics, aerial robotics, and soft robotics. He served in numerous advisory boards and committees, including the Future and Emerging Technologies division of the European Commission, the World Economic Forum Agenda Council, the International Society of Artificial Life, the International Neural Network Society, and in the editorial committee of several scientific journals. In addition, he helped spinning off two drone companies (senseFly.com and Flyability.com) and a non-for-profit portal on robotics and A.I. (RoboHub.org). Books
Manuale sulle Reti Neurali, il Mulino (in Italian), 1996 (first edition), 2006 (second edition)Evolutionary Robotics, MIT Press, 2000
Bio-Inspired Artificial Intelligence, MIT Press, 2008
Flying Insects and Robots, Springer Verlag, 2010
Jean-Marie Drezet1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) Mohamed BouriDr. Mohamed Bouri is a group leader of Rehabilitation and Assistive Robotics in LSRO and lecturer of Robotics and Industrial Robotics. He graduated in Electrical Engineering in 1992 and obtained his PhD degree in 1997 in Industrial Automation at INSA LYON, France. Since 1997, he is at EPFL and is mainly active in the field of robot control, automation and robot design for medical and industrial applications. He is the head of Rehabilitation and Assistive Robotics group since 2005 and has strong references with the development of robotic devices for lower limb rehabilitation : The MotionMaker and WalkTrainer commercialzed by the company Swortec. His ongoing research currently focuses on the development of exoskeletons and the associated control strategies. His main current projects are TWIICE, a lower limb exoskeleton for people with paraplegia, AUTONOMYO, a walk assistance exoskeleton for people with muscle weakness, and the HiBSO, a hip orthosis for elderly.
Anastasios VassilopoulosEnseignement et PhD Doctorant·es actuel·les Filippo Mannino, Joseph Vincent Arnaud Bernaert, Seyed Shayan Khalooei Tafti A dirigé les thèses EPFL de Alireza Farajzadeh Moshtaghin, Abdolvahid Movahedirad, Dharun Vadugappatty Srinivasan A co-dirigé les thèses EPFL de Ye Zhang, Behzad Dehghan Manshadi, Omar Moussa, Roohollah Sarfaraz Khabbaz, Moslem Shahverdi, Wei Sun, Haifeng Fan, Maria Savvilotidou, Myrsini Angelidi, Aida Cameselle Molares, Niloufar Vahedi, Jialiang Fan, Congzhe Wang Cours Advanced compo
Mohamed FarhatM. Farhat was born in Casablanca in 1962 (Moroccan citizen). He graduated at Ecole Nationale Supérieure d'Hydraulique et de Mécanique de Grenoble (France. He joined The LMH laboratory in 1986 as research assistant. He completed in 1994 a Ph.D. thesis on Cavitation. He joined the R&D department of Hydro-Quebec in Montréal (Canada) in 1995 where he was in charge of several research projects in the areas of production and transportation of hydropower and mainly the monitoring of large hydro turbines. Since 2001, he is senior scientist at the LMH laboratory, head of the cavitation group. He is also lecturer in Master and Doctoral programs. He is member of the Doctoral Committee in Mechanics.
