Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Imprimante

Publications associées (21)

3D Printing of Customizable Transient Bioelectronics and Sensors

Danick Briand, Nicolas Francis Fumeaux

Transient electronics have emerged as a new category of devices that can degrade after their functional lifetime, offering tremendous potential as disposable sensors, actuators, wearables, and implants. Additive manufacturing methods represent a promising ...

2024

The physics of 3D printing with light

Christophe Moser

The goal of 3D printing is to realize complex 3D structures by locally adding material in small volume elements called voxels - in contrast to successively subtracting material by etching, milling or machining. This field started with optics-based proposal ...

Nature Portfolio2023

A Sprayable Electrically Conductive Edible Coating for Piezoresistive Strain Sensing

Dario Floreano, Bokeon Kwak

Edible electronics leverages the electronic properties of food-derived materials to deliver safer technologies that can be degraded (or digested) in the environment (or body) at the end-of-life. Sensors will be central to future smart edible robots, and ed ...

Wiley2024

Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics

Jürgen Brugger, Christophe Moser, Damien Claude-Marie Loterie, Paul Delrot, Jorge Andres Madrid Wolff, Antoine Vincent Boniface, Georgia Konstantinou, Lorenz Hagelüken, Max Kollep

Ceramics are highly technical materials with properties of interest for multiple industries. Precisely because of their high chemical, thermal, and mechanical resistance, ceramics are difficult to mold into complex shapes. A possibility to make convoluted ...

2022

Utilizing additive manufacturing and mass customization under capacity constraints

Ralf Seifert, Anna Timonina-Farkas, Rachel Agnès Laetitia Rosemonde Marie Lacroix

Additive manufacturing (AM), originally used for prototyping, is increasingly adopted for custom final part production across different industries. However, printing speed and production volume are two barriers for the adoption of AM for product customizat ...

2023

Fabrication of zipping electrostatic actuators incorporating inkjet-printed layers

Herbert Shea, Samuel Rosset, Giulio Grasso

Zipping electrostatic actuators operate by bending flexible electrodes using electrostatic forces. This principle allows the use of a wide range of dielectric and conductive materials. Additive Manufacturing (AM) techniques can be used to fabricate these a ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Assembling Ni-Fe Layered Double Hydroxide 2D Thin Films for Oxygen Evolution Electrodes

Hubert Girault, Andreas Stephan Lesch, Victor Costa Bassetto

Continuous hydrothermal flow synthesis (CHFS) of Ni-Fe layered double hydroxide (LDH) leads to waterborne dispersions of 2D nanoplatelets in the range of 10-50 nm in lateral size. Conversion of the as-synthesized LDH nanoplatelet dispersion into inkjet pri ...

AMER CHEMICAL SOC2020

Gravure printed Ag/conductive polymer electrodes and simulation of their electrical properties

Frank Nüesch, Jakob Heier, René Uwe Schneider

In this paper, some practical issues related to the manufacturing, and design criteria related to the application in devices of a hybrid silver grid/poly (3,4-ethylenedioxythiophene) semi-transparent electrode are discussed. The electrodes are fabricated b ...

SPRINGER LONDON LTD2019

Activity-Based Screening of Homogeneous Catalysts through the Rapid Assessment of Theoretically Derived Turnover Frequencies

Anne-Clémence Corminboeuf, Matthew Wodrich, Boodsarin Sawatlon

In homogeneous catalysis, the turnover frequency (TOF) and turnover number (TON) are the most commonly used quantities that experimentally describe catalytic activity. Computational studies, on the other hand, generally yield the ubiquitous free energy pro ...

AMER CHEMICAL SOC2019

On Advanced Large-Field Photolithography

Raoul Kirner

The information age we live in today relies on highly integrated devices. They are fabricated with the help of photolithography, the patterning technique at the heart of their production. With the continuous demand for higher integration density to achieve ...

EPFL2019

Compact laser-assisted tools for high-resolution additive manufacturing

Paul Delrot

Micro-additive manufacturing has become an enabling technology in biomedical research as it allows for instance creating functional microstructures or studying cellular interactions at the microscale. Among the various manufacturing techniques laser-actuat ...

EPFL2018

Inkjet Printing of Viscous Monodisperse Microdroplets by Laser-Induced Flow Focusing

Demetri Psaltis, Christophe Moser, François Gallaire, Paul Delrot, Miguel Antonio Modestino

The on-demand generation of viscous microdroplets to print functional or biological materials remains challenging using conventional inkjet-printing methods, mainly due to aggregation and clogging issues. In an effort to overcome these limitations, we impl ...

American Physical Society (APS)2016

Laser-assisted inkjet printing of highly viscous fluids with sub-nozzle resolution

Demetri Psaltis, Christophe Moser, Paul Delrot, Miguel Antonio Modestino

Drop-on-demand inkjet printing is mostly based on thermal and piezo-actuation, allowing for densely packed nozzles in inkjet printers. However, the droplet diameter is typically defined by the nozzle diameter, thus limiting the range of viscosity that can ...

Spie-Int Soc Optical Engineering2016

Intensity and phase fields behind phase-shifting masks studied with high-resolution interference microscopy

Hans Peter Herzig, Toralf Scharf, Myun Sik Kim, Ali Naqavi, Krishnaparvathy Puthankovilakam

We try to find out the details of how light fields behind the structures of photomasks develop in order to determine the best conditions and designs for proximity printing. The parameters that we use approach real situations like structure printing at prox ...

SPIE-Intl Soc Optical Eng2016

A New Anti-Counterfeiting Feature Relying on Invisible Luminescent Full Color Images Printed with Lanthanide-Based Inks

Jacques-Edouard Moser, Roger Hersch, Anne-Sophie Chauvin, Julien Alexandre Andres

Europium and terbium trisdipicolinate complexes are inkjet printed onto paper with commercially available desktop inkjet printers. Together with a commercial blue luminescent ink, the red-emitting luminescent ink containing europium and the green-emitting ...

Wiley-Blackwell2014

New Tools for Hydrogel-Based 3D Bioprinting

Andrea Negro

The in vitro recapitulation of tissue and organ function represents one of the main objectives of tissue engineering. Developments in this field have numerous applications, from alleviating the shortage of donor organs to providingmore representative pla ...

EPFL2014

Microdrop generation and deposition of ionic liquids

Jürgen Brugger, Victor Javier Cadarso Busto

This work describes the use of a piezo-actuated inkjet print head with a nozzle aperture of 50 mu m to obtain picoliter drops of different model ionic liquids (ILs). A theoretical analysis of the microdrop generation of three model ILs is confirmed by expe ...

Materials Research Society2014

Inkjet-printed SU-8 Hemispherical Microcapsules and Silicon chip Embedding

Jürgen Brugger, Victor Javier Cadarso Busto, Massimo Mastrangeli, Loïc Jacot-Descombes, Rosario Maurizio Gullo

Planar lithography techniques are not effective for precise fabrication of microdevices with hemispherical shapes. Drop-on-demand (DOD) inkjet printing (IJP) of photo-curable ink is a more appropriate fabrication approach as it takes advantage of the surfa ...

2013

Decreasing the size of printed comb electrodes by the introduction of a dielectric interlayer for capacitive gas sensors on polymeric foil: Modeling and fabrication

Nico de Rooij, Danick Briand, Francisco Molina Lopez

In this work we present a novel strategy to fabricate printed comb electrodes devices with decreased size by the introduction of a thin dielectric layer between the two combs. The electrical insulation of the two polarities prevents short-cuts occurring be ...

Elsevier2013

Carbon nanotubes-SU8 composite for flexible conductive inkjet printable applications

Jürgen Brugger, László Forró, Arnaud Magrez, Richard Gaal, Kristopher Pataky, Marijana Mionic Ebersold

We have developed a conducting composite based on multi-walled carbon nanotubes and bisphenol A novolak epoxy resin (SU8) for inkjet printing purposes. We could deposit regular conducting stripes and arrays of 150 mu m spots on glass and on flexible polyet ...

Royal Society of Chemistry2012