Ali MeimandiExpertise
Research interests:Analog and digital circuit designBiomedical circuits and systems
Ali Meimandi received B.Sc degree in electrical engineering from Amirkabir University of Technology(Tehran Polytechnic), Tehran, Iran, and M.Sc. degree in electronic engineering from Politecnico di Milano, Milan, Italy, in 2018 and 2022, respectively. He is a Research Assistant and doctoral candidate in the BioCMOS Interfaces(BCI) Laboratory at école Polytechnique Fédérale de Lausanne, Lausanne, Switzerland.His res
Mariagrazia GrazianoEnseignement et PhD Cours Quantum and nanocomputing MICRO-435 Le cours enseigne les architectures non von-Neumann. La première partie du cours traite de l'informatique, de la détection et des communications quantiques. La seconde se concentre sur la nano-informatique couplée au champ et basée sur la conduction, l'informatique en mémoire et l'informatique moléc
David Atienza AlonsoDavid Atienza Alonso is an associate professor of EE and director of the Embedded Systems Laboratory (ESL) at EPFL, Switzerland. He received his MSc and PhD degrees in computer science and engineering from UCM, Spain, and IMEC, Belgium, in 2001 and 2005, respectively. His research interests include system-level design methodologies for multi-processor system-on-chip (MPSoC) servers and edge AI architectures. Dr. Atienza has co-authored more than 350 papers, one book, and 12 patents in these previous areas. He has also received several recognitions and award, among them, the ICCAD 10-Year Retrospective Most Influential Paper Award in 2020, Design Automation Conference (DAC) Under-40 Innovators Award in 2018, the IEEE TCCPS Mid-Career Award in 2018, an ERC Consolidator Grant in 2016, the IEEE CEDA Early Career Award in 2013, the ACM SIGDA Outstanding New Faculty Award in 2012, and a Faculty Award from Sun Labs at Oracle in 2011. He has also earned two best paper awards at the VLSI-SoC 2009 and CST-HPCS 2012 conference, and five best paper award nominations at the DAC 2013, DATE 2013, WEHA-HPCS 2010, ICCAD 2006, and DAC 2004 conferences. He serves or has served as associate editor of IEEE Trans. on Computers (TC), IEEE Design & Test of Computers (D&T), IEEE Trans. on CAD (T-CAD), IEEE Transactions on Sustainable Computing (T-SUSC), and Elsevier Integration. He was the Technical Program Chair of DATE 2015 and General Chair of DATE 2017. He served as President of IEEE CEDA in the period 2018-2019 and was GOLD member of the Board of Governors of IEEE CASS from 2010 to 2012. He is a Distinguished Member of ACM and an IEEE Fellow.
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Giovanni De MicheliExpertise
Technologies de conception pour les systèmes intégrés, tels que la synthèse, le codesign de HW/SW et la conception de basse puissance. Technologies de conception des systèmes sur les plateformes hétérogènes comprenant les composants électriques, et biologiques.
En savoir plus
Consulter svp http://si2.epfl.ch/~demichel/
Enseignement et PhD A dirigé les thèses EPFL de Abhishek Garg, Mohamed Haykel Ben Jamaa, Francesco Zanini, Ciprian Seiculescu, Cristina Boero, Hu Xu, Andrea Cavallini, Shashi Kanth Andrei ArdeleanAndrei Ardelean received the B.Sc. degree in Electronics from "Politehnica" University of Timisoara, Timisoara, Romania, in 2015, and the M.Sc. degree in Microelectronics from the Delft University of Technology, Delft, Netherlands, in 2017. He is currently working towards his Ph.D. in the AQUA Laboratory at EPFL. His main research interests are single-photon counting time-correlated image sensors for real time phasor-based fluorescence lifetime imaging microscopy.
Claudio BruschiniClaudio Bruschini holds an MSc in high energy physics from the University of Genova and a PhD in Applied Sciences from the Vrije Universiteit Brussel (VUB). He started his career with INFN (Italy, 1993), in the WA92 CERN collaboration (particle physics), and then moved to CERN as a Fellow in the European GP-MIMD2 project, attached to the NA48 collaboration (particle physics, parallel programming, 1994-1995). He then started his close collaboration with EPFL, first in the DeTeC (Demining Technology Center) project (sensors for landmine detection/humanitarian demining, 1996-1997). After DeTeC's end, he started the first of a series of fruitful collaborations with the Vrije Universiteit Brussel (VUB) on humanitarian demining related R&D (1998). This was followed by the EUDEM survey project (The European Union in Humanitarian Demining, 1998), the EUDEM2 three year EC sponsored support measure (www.eudem.info, 2001-2004), and the DELVE support action (www.delve.vub.ac.be, 2007). In parallel he started working within the EPFL's AQUA group (Advanced Quantum Architectures, Edoardo Charbon), on topics as diverse as ultrasonic sensors for in-air application, optical 3D and high speed 2D sensing, sensor networks, or tracking/motion capture systems, in particular for the preparation of research projects. This culminated in the European MEGAFRAME (www.megaframe.eu, FP6, 2006-2010, SPAD arrays and related in-pixel time stamping electronics in deep submicron CMOS technology) and SPADnet (www.spadnet.eu, FP7, 2010-2014, networked SPAD arrays for Positron Emission Tomography) projects, coordinated by EPFL-AQUA. As from 2009 he also worked with Dario Floreano on the management of the CURVACE Curved Artificial Compound Eyes FP7 project (www.curvace.org), coordinated by EPFL-LIS. He was also active with CHUV (Lausanne University Hospital) within EndoTOFPET-US (endoscopic PET) as well as on a CTI project devoted to the development of a new hand-held standalone tool for tracer-guided medical procedures. In 2014 he had also the pleasure of joining the EPFL ICLAB of Christian Enz during its ramp-up phase, collaborating on device related topics (SNF GigaRadMOST) and biomedical R&D (NanoTera WiseSkin). Claudio is now fully with EPFL’s Advanced Quantum Architecture (AQUA). He has also been active as independent scientific consultant, under the label CBR Scientific Consulting, on the preparation of (European) R&D project proposals and the execution of individual studies, and worked in 2006 for a local start-up as operations manager and R&D advisor.... but this is another story. An unauthorized early biography is available at http://lami.epfl.ch/team/claudiob/... Marco MattavelliEnseignement et PhD A dirigé les thèses EPFL de Christophe Clerc, Ruohua Zhou, Beilu Shao, Christophe Lucarz, Richard Thavot, Ab Al Hadi Bin Ab Rahman, Endri Bezati, Simone Casale Brunet, Malgorzata Michalska, Ana Angelica Hernandez Lopez, Aurélien Bloch, Mustafa Besirli, Ünsal Öztürk A co-dirigé les thèses EPFL de Sylvain Aguirre Cours Systems and architectures for signal processing EE-555 Etude des composants essentiels eessentiels et des technologies des systèmes de traitements des signau
Diego Ruben BarrettinoDiego Barrettino received the Dipl.-Ing. degree in Electronic Engineering from the University of Buenos Aires, Argentina, in 1997, and the Ph.D. degree in Electrical Engineering from the Swiss Federal Institute of Technology Zurich (ETHZ), Switzerland, in 2004. From 1997 to 2000, he worked in Allegro MicroSystems, Inc., where he was an Analog IC Designer of Hall-effect magnetic sensors. From 2000 to 2004, he was a Research Assistant at ETHZ. In 2004, he was a Postdoctoral Research Associate in the Universit
Pierre-André FarinePierre-André Farine received the Doctoral and Engineering Degrees in Microtechnology from University of Neuchâtel, Switzerland, respectively in 1984 and 1978, and the Engineering in Microtechnology from ETS Le Locle in 1974.
He was working 17 years for the Swiss watch industries (Swatch Group), including developments for high-tech products, such as pager watches, watches including integrated sensors such as pressure, compass, altimeter and temperature sensors for Tissot. He was also involved in prototypes developments for watches including GPS and cellular GSM phones.
Since 8 years, he is Professor in Electronics and Signal Processing at the Institute of Microtechnology IMT, University of Neuchâtel, Switzerland. Full professor at EPFL since January 1st, 2009, he works in the field of low-power integrated products for portable devices, including microelectronics for wireless telecommunications, UWB and GNSS systems. He is Head of the Electronics and Signal Processing Laboratory ESPLAB of the EPFL IMT-NE. His laboratory works also for video and audio compression algorithms and their implementation in low power integrated circuits.
Maher KayalMaher Kayal received M.S. and Ph.D degrees in electrical engineering from the Ecole Polytechnique Fédérale de Lausanne (EPFL, Switzerland) in 1983 and 1989 respectively. He has been with the Electronics laboratories of the Ecole Polytechnique Fédérale de Lausanne (EPFL, Switzerland) since 1990, where he is currently a professor and director of the Energy Management and Sustainability" section. He has published many scientific papers, coauthor of three text books dedicated to mixed-mode CMOS design and he holds eleven patents. His technical contributions have been in the area of analog and Mixed-signal circuits design including highly linear and tunable sensors microsystems, signal processing and green energy management. Prizes and Honors : Electronics Letters journal Premium Award 2013, Outstanding Paper Award? IEEE Mixdes 2013 Basil Papadias paper Award, IEEE Powertech 2013 Best Paper Awards, Mixdes 2013 Best Paper Awards, ICCAS 2012 Outstanding Paper Award- IEEE Mixdes 2012. Poland Section IEEE ED Chapter special award in 2011. Credit Suisse Award for Best Teaching- 2009. The William M. Portnoy Award at the Energy Conversion Congress and Exposition , California Sept 2009. Best Paper Award - IEEE-Mixdes 2009. High Quality Paper - IEEE Power Tech Conference June 2009. Best Paper Award - IEEE-Mixdes 2007. Best Paper Award - IEEE-TTTC International Conference on Automation, Quality and Testing, Robotics - 2006. Best Application Specific Integrated Circuit at the International European Design and Test Conference ED&TC - 1997. Ascom Award for the Best Work in Telecommunication Fields 1990. Publications Books. Books: Methodology for the Digital Calibration of Analog Circuits and Systems, Marc Pastre & Maher Kayal. Springer Publisher- (ISBN 1-4020-4252-3)-2006. Structured Analog CMOS Design, Danica Stefanovic & Maher Kayal. Springer Publisher-(ISBN 978-1-4020-8572-7)-2008. Linear CMOS RF Amplifiers for Wireless Applications, Maher Kayal, Springer Publisher. (ISBN 978-90-481-9360-8)-2010. Coeditor of Microelectronics Education Kluwer Academic Publishers. (ISBN 1-4020-2072-4). -2004.
Jean-Michel SalleseEnseignement et PhD Doctorant·es actuel·les Marta Macaluso A dirigé les thèses EPFL de Luca Gautero, Fengda Sun, Frédéric Zanella, Lucian Barbut, Farzan Jazaeri, Camillo Stefanucci, Jacopo Bronuzzi, Georgi Gorine, Chiara Rossi, Viros Sriskaran, Arnout Devos, Gennaro Termo A co-dirigé les thèses EPFL de Louis Harik, Fabrizio Lo Conte, Maria-Alexandra Paun, Anurag Mangla, Pranav Vivek Kulkarni Cours Electronique EE-280 Présentation des principaux composants de base de l'électronique.Analyse
Franco De PalmaExpertise
Solid state physics, Quantum computing, Nanoelectronics, Nanofabrication
Currently working as Doctoral Assistant in the Hybrid Quantum Circuits Laboratory of Prof. Pasquale Scarlino and Nanolab of Prof. Adrian M. Ionescu on the fabrication of Quantum Dots in planar Ge coupled with superconducting resonators. I have a Master's degree in Nanotechnologies from Politecnico di Torino, where I got also my Bachelor's degree in Physics Engineering, Grenoble Phelma INP and EPFL.
