Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Surface finish

Publications associées (19)

Roughness Evolution Induced by Third-Body Wear

Jean-François Molinari, Tobias Brink, Antonio Joaquin Garcia Suarez

Surface roughness is a key factor when it comes to friction and wear, as well as to other physical properties. These phenomena are controlled by mechanisms acting at small scales, in which the topography of apparently flat surfaces is revealed. Roughness i ...

2024

Study on the possibility of Φ-OTDR sensing in hollow-core fibres

Luc Thévenaz, Malak Mohamed Hossameldeen Omar Mohamed Galal, Yuting Yang

The backscattering process in hollow core fibres shows a large similarity with Rayleigh scattering, offering the potential to be exploited for distributed sensing. A classical Φ-OTDR implementation is used to observe the backscattering signal from the surf ...

SPIE2023

Pre-annealing for improved LPCVD deposited boron-doped poly-Si hole-selective contacts

Franz-Josef Haug, Luca Massimiliano Antognini, Josua Andreas Stückelberger, Xinyu Zhang

We demonstrate the beneficial effect of a pre-annealing step prior to the boron diffusion on passivation and contact resistivity of industrially LPCVD deposited poly-Si/SiOX hole-selective contacts. We investigate the influence of the pre-annealing tempera ...

ELSEVIER2023

Thermal Modelling and Experimental Validation in the Perspective of Tool Steel Laser Polishing

Eric Boillat, Alexandre Masserey

Laser polishing (LP) is a process that allows a significant reduction of the surface roughness of a metal workpiece via re-melting a shallow layer of material. However, the practical use of LP is limited due to the difficulty of satisfying the high surface ...

MDPI2022

Contact.engineering-Create, analyze and publish digital surface twins from topography measurements across many scales

Till Junge

The optimization of surface finish to improve performance, such as adhesion, friction, wear, fatigue life, or interfacial transport, occurs largely through trial and error, despite significant advancements in the relevant science. There are three central c ...

IOP Publishing Ltd2022

Effect of wear particles and roughness on nanoscale friction

Jean-François Molinari, Tobias Brink, Enrico Milanese

Frictional contacts lead to the formation of a surface layer called the third body, consisting of wear particles and structures resulting from their agglomerates. Its behavior and properties at the nanoscale control the macroscopic tribological performance ...

2022

Adhesive wear regimes on rough surfaces and interaction of micro-contacts

Jean-François Molinari, Son-Jonathan Pham-Ba

We develop an analytical model of adhesive wear between two unlubricated rough surfaces, forming micro-contacts under normal load. The model is based on an energy balance and a crack initiation criteria. We apply the model to the problem of self-affine rou ...

2021

A lubricated tribocorrosion model incorporating surface roughness

Stefano Mischler, Shoufan Cao

This study presents an improvement of an existing tribocorrosion model developed for passive CoCrMo alloys. This model is based on an empirical formalism established by Duncan Dowson in his pioneering works on the relation between wear and elasto-hydrodyna ...

2021

Adaptive Self-Sealing Suction-Based Soft Robotic Gripper

Metin Sitti, Sukho Song

While suction cups prevail as common gripping tools for a wide range of real-world parts and surfaces, they often fail to seal the contact interface when engaging with irregular shapes and textured surfaces. In this work, the authors propose a suction-base ...

2021

A parameter-free mechanistic model of the adhesive wear process of rough surfaces in sliding contact

Jean-François Molinari, Tobias Brink, Lucas Henri Galilée Frérot

In order to develop predictive wear laws, relevant material parameters and their influence on the wear rate need to be identified. Despite decades of research, there is no agreement on the mathematical form of wear equations and even the simplest models, s ...

2021

Stick-slip phenomena and Schallamach waves captured using reversible cohesive elements

Jean-François Molinari, Thibault Didier Roch

Reversibility is of paramount importance in the correct representation of surface peeling in various physical settings, ranging from motility in nature, to gripping devices in robotic applications, and even to sliding of tectonic plates. Modeling the detac ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Jamming with Tunable Roughness

Matthieu Wyart

We introduce a new model to study the effect of surface roughness on the jamming transition. By performing numerical simulations, we show that for a smooth surface, the jamming transition density and the contact number at the transition point both increase ...

AMER PHYSICAL SOC2020

Energy distribution of harmonic 1-forms and Jacobians of Riemann surfaces with a short closed geodesic

Jürgpeter Buser

We study the energy distribution of harmonic 1-forms on a compact hyperbolic Riemann surface S where a short closed geodesic is pinched. If the geodesic separates the surface into two parts, then the Jacobian variety of S develops into a variety that split ...

2021

Joining of Oxide Dispersion-Strengthened Steel Using Spark Plasma Sintering

Cyril Cayron

Difficulties with joining oxide dispersion-strengthened (ODS) steels using classical welding processes have led to the development of alternative joining techniques such as spark plasma sintering (SPS). SPS, which is classically employed for performing sin ...

2020

Surface roughness evolution in adhesive wear processes

Enrico Milanese

Geological faults movements generating earthquakes, a vehicles' tyres rolling on the pavement, and a chalk writing on a blackboard are all different examples of frictional systems. In these systems, which are everywhere around us, two separate bodies are i ...

EPFL2020

Hydraulic Transport Through Calcite Bearing Faults With Customized Roughness: Effects of Normal and Shear Loading

Marie Estelle Solange Violay, Mateo Alejandro Acosta

Understanding fluid flow in rough fractures is of high importance to large scale geologic processes and to most anthropogenic geo‐energy activities. Here we conducted fluid transport experiments on Carrara marble fractures with a novel customized surface t ...

2020

The transfer of forces through rough surface contact in concrete

Max Tirassa

Aggregate interlocking is a phenomenon occurring when the opposite sides of a concrete crack slide relative to each other. Due to surface roughness, protruding material from one crack-side can engage with the opposite one and thus exchange forces. This aff ...

EPFL2020

The emergence of small-scale self-affine surface roughness from deformation

Till Junge

Most natural and man-made surfaces appear to be rough on many length scales. There is presently no unifying theory of the origin of roughness or the self-affine nature of surface topography. One likely contributor to the formation of roughness is deformati ...

AMER ASSOC ADVANCEMENT SCIENCE2020

Estimating Mean Bedload Transport Rates and Their Uncertainty

Christophe Ancey, Ivan Pascal

Measuring bedload transport rates usually involves measuring the flux of sediment or collecting sediment during a certain interval of time Δt. Because bedload transport rates exhibit significant non‐Gaussian fluctuations, their time‐averaged rates depend a ...

2020