Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Calorimètre

Publications associées (29)

Measurement of WBG-based power supplies

Elison de Nazareth Matioli, Armin Jafari, Hongkeng Zhu

This paper discusses different measurement methods to evaluate the efficiency of WBG-based power supply solutions, including electrical measurement methods and their verification with calorimetric methods, and compares the performance of Si-based and GaN-b ...

IEEE2023

Characterisation and hydration kinetics of beta-C2S synthesised with K2SO4 as dopant

Karen Scrivener, Franco Alberto Zunino Sommariva

In this study, a protocol for synthesising beta-C2S using K2SO4 as a dopant has been reported. Quantitative X-Ray diffraction was used to characterise synthesised samples. It was observed that it is possible to synthesise beta-C2S with high purity (>96 wt% ...

Pergamon-Elsevier Science Ltd2023

Coupled segregation mechanisms of Sc, Zr and Mn at theta ' interfaces enhances the strength and thermal stability of Al-Cu alloys

Baptiste Thomas Jean Rouxel

The refinement and thermal stability of intermediate theta-prime (theta') precipitates are critical in the development of new high strength 2xxx series aluminium-copper (Al-Cu) alloys for high temperature applications. In this work, we use trace additions ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Promoting Persistent Superionic Conductivity in Sodium Monocarba-closo-dodecaborate NaCB11H12 via Confinement within Nanoporous Silica

Mirjana Dimitrievska

Superionic phases of bulk anhydrous salts based on large cluster-like polyhedral (carba)borate anions are generally stable only well above room temperature, rendering them unsuitable as solid-state electrolytes in energy-storage devices that typically oper ...

AMER CHEMICAL SOC2021

Effects of Ball Milling and TiF3 Addition on the Dehydrogenation Temperature of Ca(BH4)2 Polymorphs

Andreas Züttel

The changes introduced by both ball milling and the addition of small amounts of TiF3 in the kinetics of the hydrogen desorption of three different Ca(BH4)2 polymorphs (α, β and γ) have been systematically investigated. The samples with different polymorph ...

2020

Structural and Dynamical Properties of Potassium Dodecahydro-monocarba-closo-dodecaborate: KCB11H12

Mirjana Dimitrievska

MCB11H12 (M: Li, Na) dodecahydro-monocarba-closo-dodecaborate salt compounds are known to have stellar superionic Li+ and Na+ conductivities in their high-temperature disordered phases, making them potentially appealing electrolytes in all-solid-state batt ...

AMER CHEMICAL SOC2020

N2O Decomposition over Fe-ZSM-5: A Systematic Study in the Generation of Active Sites

Lioubov Kiwi, Bryan Bromley

We have carried out a systematic investigation of the critical activation parameters (i.e., final temperature (673-1273 K), atmosphere (He vs. O-2/He), and final isothermal hold (1 min-15 h) on the generation of "alpha-sites", responsible for the direct N2 ...

2020

Rapid, Robust, and Relevant (R3) Reactivity Test for Supplementary Cementitious Materials

Karen Scrivener, François Henri Avet, Xuerun Li, Ruben Anton Snellings

Although supplementary cementitious materials (SCMs) are now commonly accepted and widely used, consensus has not been reached for methods to test their chemical reactivity. A multitude of test methods exist but often fall short on one or more of the key f ...

AMER CONCRETE INST2019

Differential Heating Drives Downslope Flows that Accelerate Mixed-LayerWarming in Ice-Covered Waters

Alfred Johny Wüest, Damien Bouffard, Hugo Nicolás Ulloa Sánchez

In ice-covered lakes, penetrative radiation warms fluid beneath a diffusive boundary layer, thereby increasing its density and providing energy for convection in a diurnally active, deepening mixed layer. Shallow regions are differentially heated to warmer ...

2019

Effect of surface modification of colloidal silica nanoparticles on the rigid amorphous fraction and mechanical properties of amorphous polyurethane-urea-silica nanocomposites

John Christopher Plummer, Nicolas Candau, Oguzhan Oguz

Colloidal silica nanoparticles (NPs) modified with eight different silane coupling agents were incorporated into an amorphous poly(tetramethylene oxide)-based polyurethane-urea copolymer matrix at a concentration of 10 wt % (4.4 vol %) in order to investig ...

2019

One-dimensional facile growth of MAPbI(3) perovskite micro-rods

Mohammad Khaja Nazeeruddin

One-dimensional microrods (4-5 mm) of PbI2 and CH3NH3PbI3 (MAPbI(3)) with unique structural and morphological properties have been grown at room temperature. X-ray diffraction (XRD) patterns of both types of micro-rods exhibit a hexagonal system (P3m1(164) ...

2019

Tensile response of Strain-Hardening Ultra High Performance Fiber Reinforced Concretes under low loading rates and low temperatures

Mohamed Abdul Hafiz

Strain Hardening Ultra High Performance Fiber Reinforced Concretes (SH-UHPFRC) are cementitious materials with exceptional mechanical properties and outstanding durability making them ideal materials for rehabilitation, for the improvement of load carrying ...

EPFL2019

High-pressure NMR spectroscopic and calorimetric studies on formic acid dehydrogenation and carbon dioxide hydrogenation

Cornel Fink

Our current energy production is convenient and simple, but it is not sustainable. The negative impacts on our environment are omnipresent in the form of smog, extinction of species, and global warming. A major challenge of our generation is the transition ...

EPFL2018

Fast real time and quantitative gas analysis method for the investigation of the CO2 reduction reaction mechanism

Andreas Züttel, Wen Luo, Robin Tobias Andreas Mutschler, Emanuele Moioli

We present a new fast real time and quantitative gas analysis method by means of mass spectrometry (MS), which has approximately an order of magnitude faster sampling rate in comparison with a traditional gas chromatography. The method is presented and dis ...

AMER INST PHYSICS2018

A systematic approach for thermal stability predictions of chemicals and their risk assessment: Pattern recognition and compounds classification based on thermal decomposition curves

Thierry Meyer, Nadia Baati, Annik Nanchen

In the context of process and product design, predictive models are increasingly employed. Decomposition properties of chemicals may be experimentally determined through calorimetric measurements, and a few molecular structure-based models- which correlate ...

Institution of Chemical Engineers2017

Benzimidazolium salt-based solid-state electrolytes afford efficient quantum-dot sensitized solar cells

Paul Joseph Dyson, Zhaofu Fei, Zhangjun Huang

A novel solid-state electrolyte based on 1,3-dihexylbenzimidazolium ([DHexBIm]) cations combined with Br-, BF4- or SCN- anions is used in CdS/CdSe sensitized quantum dot sensitized solar cells (QDSSCs). A power conversion efficiency of 4.26% was achieved w ...

Royal Society of Chemistry2017

Investigation of RF Nb-Ti PF 1&6 Coils Conductor Performances in the SULTAN Test Facility

Pierluigi Bruzzone, Boris Stepanov

This paper summarizes the work on the manufacturing and testing of conductor samples for ITER poloidal field 1&6 coils. The work was carried out by the IO and multiple institutions in the EU, Switzerland and Russia. Five samples were manufactured and teste ...

IEEE Institute of Electrical and Electronics Engineers2017

A New 1,3,4-Oxadiazole-Based Hole-Transport Material for Efficient CH3NH3PbBr3 Perovskite Solar Cells

Michael Graetzel, Ulf Anders Hagfeldt, Antonio Abate, Juan-Pablo Correa-Baena

A new hole-transport material (HTM) based on the 1,3,4-oxadiazole moiety (H1) was prepared through a single-step synthetic pathway starting from commercially available products. Thanks to a deep HOMO level, H1 was used as HTM in CH3NH3PbBr3 perovskite sola ...

Wiley-V C H Verlag Gmbh2016

Thermal Stability Predictions for Inherently Safe Process Design Using Molecular-Based Modelling Approaches

Thierry Meyer, Nadia Baati, Francis Stoessel, Annik Nanchen

For efficient inherently safe design, awareness of all available options at the appropriate decision-making moment is key. Simulations offer both timely availability and large screening possibilities. Therefore computer-aided product design gained in popul ...

Aidic Servizi Srl2016

Impact of water activity on the stability of ettringite

Karen Scrivener

The stability of ettringite as function of temperature and water vapour pressure was studied on synthetic samples using X-ray diffraction, thermogravimetric analysis, sorption balance measurements and different calorimetry techniques. Crystalline ettringit ...

Pergamon-Elsevier Science Ltd2016