Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Electrical conduit

Publications associées (31)

Thermal sensing device and sensory feedback system and method using such thermal sensing device

Silvestro Micera, Solaiman Shokur, Outman Akouissi, Jonathan Louis Muheim

The present invention concerns a thermal sensing device (1) and a sensory feedback system and method using such thermal sensing device, comprising at least one film (19) of electrically insulating polymer defining a global surface of the thermal sensing de ...

2024

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Kamil Sedlák, Yu Wu

Following the conceptual design, the engineering design of the dc magnet and cable-in-conduit conductor (CICC) for the Super-X test facility has been done in 2021. Totally three types of conductors with different structures were designed for the three pair ...

IEEE Institute of Electrical and Electronics Engineers2023

Assessment of the Feasibility of Applying the Electromagnetic Time Reversal Theory to Locate Defects in Grounding Electrodes

Farhad Rachidi-Haeri, Marcos Rubinstein, Hamidreza Karami, Rafael Silva Alipio

In recent years, the electromagnetic time reversal (EMTR) theory has been successfully applied for locating various sources of disturbances, such as short-circuit faults, in power systems. In this paper, a theoretical analysis of the feasibility of applyin ...

2023

Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

Kamil Sedlák, Xabier Sarasola Martin, Roberto Guarino, Nikolay Bykovskiy

A hybrid design of the Central Solenoid is under study within the conceptual design phase of the European DEMO fusion reactor. It is based on HTS conductors in the innermost high-field layers, and Nb3Sn and NbTi conductors for field values below 15 T. Sinc ...

2022

Surface Susceptibilities as Characteristic Models of Reflective Metasurfaces

Karim Achouri, Shourya Dutta Gupta, Ville Tuovi Tiukuvaara

While metasurfaces (MSs) are constructed from deeply subwavelength unit cells, they are generally electrically large and full-wave simulations of the complete structure are computationally expensive. Thus, to reduce this high computational cost, nonuniform ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Intergrade Joints for Nb3Sn cables of high magnetic field magnets

Vincenzo D'Auria

The objective of this thesis is the development of high-field and high-current joints between Nb3Sn cables for superconducting coils. The main fields of application are high energy physics (HEP) and thermonuclear fusion. In this thesis, the focus is on Win ...

EPFL2022

3PAC: A Plug-and-Play System for Distributed Power Sharing and Communication in Modular Robots

Jamie Paik, Christoph Heinrich Belke, Kevin Andrew Holdcroft

In modular robotics, there is classically a compromise between coupling complexity and functionality. The mechanical and electrical designs are linked, such that adding electrical features often requires redesigning the mechanical components. However, incr ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Application of Copper Thermal Spraying for Electrical Joints between Superconducting Nb3Sn Cables

Pierluigi Bruzzone, Vincenzo D'Auria

This manuscript reports on the application of copper thermal spraying in the manufacturing process of an electrical connection between Nb3Sn cables for superconducting magnets of fusion reactors. The joint is realized through diffusion bonding of the spray ...

MDPI2022

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

A cryogenic electro-optic interconnect for superconducting devices

Tobias Kippenberg, Anton Lukashchuk, Nathan Rafaël Bernier, Liu Qiu, Itay Shomroni, Amir Youssefi, Philipp Johann Uhrich

A major challenge to the scalability of cryogenic computing platforms is the heat load associated with the growing number of electrical cable connections between the superconducting circuitry and the room-temperature environment. Compared with electrical c ...

2021

Impact of mechanical and thermal cycles at different operating conditions on the ITER toroidal field coil conductor performance

Pierluigi Bruzzone, Kamil Sedlák

The impact of electromagnetic (EM) and thermal cyclic loading (referred as warm-up-cool-down-WUCD) on the Nb3Sn cable in conduit conductors for the toroidal field magnets of the ITER tokamak should be carefully assessed for the proper operation of the mach ...

IOP Publishing Ltd2021

Dimensional scaling of thin-film stimulation electrode systems in translational research

Stéphanie Lacour, Giuseppe Schiavone, Nicolas Vachicouras, Yashwanth Sai Reddy Vyza

Objective. Electrical stimulation of biological tissue is an established technique in research and clinical practice that uses implanted electrodes to deliver electrical pulses for a variety of therapies. Significant research currently explores new electro ...

2021

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

Pierluigi Bruzzone, Boris Stepanov, Kamil Sedlák, Mithlesh Kumar

In the frame of the conceptual design studies for the Toroidal Field (TF) coils of DEMO, a solution based on a layer-wound magnet, rectangular-shaped Cable-in-Conduit conductors and W&R manufacturing approach, is being developed. The feasibility and perfor ...

IEEE Institute of Electrical and Electronics Engineers2021

Role of electric currents in the Fano resonances of connected plasmonic structures

Olivier Martin, Marco Riccardi

In this work, we use finite elements simulations to study the far field properties of two plasmonic structures, namely a dipole antenna and a cylinder dimer, connected to a pair of nanorods. We show that electrical, rather than near field, coupling between ...

2021

Quench Simulation of REBCO Cable-in-Conduit Conductor With Twisted Stacked-Tape Cable

Pierluigi Bruzzone, Rainer Wesche, Kamil Sedlák, Davide Uglietti

Quench protection is a critical issue for magnet using high-temperature superconducting (HTS) materials such as REBCO. For cable-in-conduit conductor (CICC) with twisted REBCO tapes, which is considered for high-current HTS conductor for fusion magnet, the ...

IEEE Institute of Electrical and Electronics Engineers2020

In Vitro Cytocompatibility Assessment of Ti-Modified, Silicon-oxycarbide-Based, Polymer-Derived, Ceramic-Implantable Electrodes under Pacing Conditions

Jürgen Brugger, Demetri Psaltis, Eirini Kakkava, Giulia Panusa, Jongmoon Jang, Pierrick Guy Robert Clément

Polymer-derived ceramics (PDC) have recently gained increased interest in the field of bioceramics. Among PDC's, carbon-rich silicon oxycarbide ceramics (SiOC) possess good combined electrical and mechanical properties. Their durability in aggressive envir ...

AMER CHEMICAL SOC2020

Inkjet Printing of Complex Soft Machines with Densely Integrated Electrostatic Actuators

Herbert Shea, Samuel Rosset, Samuel Schlatter, Giulio Grasso

A multimaterial inkjet printing method for integrated soft multifunctional machines is reported, combining dense arrays of electrostatic actuators, multilayer electrical routing, and complex networks of microfluidic channels in one printing process. Most a ...

2020

Design of DEMO PF Coils Based on Cable-in-Conduit Conductor

Pierluigi Bruzzone, Kamil Sedlák, Mithlesh Kumar

The poloidal field (PF) coils are designed based on the requirements defined by the EUROfusion 2015 DEMO baseline. The conductors are forced flow, NbTi cable-in-conduit. The design addresses the dimensioning of the winding pack, the electromagnetic field c ...

2019

Patterned biphasic electrical conductor and methods for producing thereof

Stéphanie Lacour, Arthur Edouard Hirsch

A method for manufacturing an electrical conductor is herein disclosed, said method comprising a) providing a substrate comprising on a surface thereof a solid metal conductive layer or film; b) depositing a liquid metal on said solid layer; c) allowing sa ...

2019

Sim-to-real transfer reinforcement learning for control of thermal effects of an atmospheric pressure plasma jet

Berend Smit

Applications of atmospheric pressure plasma jets (APPJs) present challenging feedback control problems due to the complexity of the plasma-substrate interactions. The plasma treatment of complex substrates is particularly sensitive to changes in the physic ...

2019