Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Fil électrique

Publications associées (31)

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Chiara Frittitta, Federica Demattè

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

Farhad Rachidi-Haeri, Marcos Rubinstein

In online single-sided partial discharge (PD) location, the measured PD reflection patterns are affected by the characteristics of all the components of the associated power network. This paper analyses the performance of a PD location method based on elec ...

2024

Device, system, and method for ion fragmentation by use of an ion mobility device and messenger tagging

Thomas Rizzo, Ahmed Ben Faleh, Stephan Warnke

A device for fragmenting ions by collision induced dissociation, the device intended to be used together with a planar ion mobility apparatus, the device including a first conductive grid having a plurality of first openings, the first conductive grid conf ...

2023

Assessment of the transmission line theory in the modeling of multiconductor underground cable systems for transient analysis using a full-wave FDTD method

Farhad Rachidi-Haeri, Rafael Silva Alipio, Naiara Figueiredo Duarte

In this paper, a rigorous and independent validation of two different approaches for calculating the ground-return impedance and admittance of multiconductor underground cable systems using the transmission line theory is carried out. Furthermore, analyses ...

Elsevier2023

Robust Analog Multisensory Array System for Lossy Capacitive Sensors Over Long Distances

Sandro Carrara, Amar Kapic

A robust capacitive multisensory readout system is presented in this article. The system consists of a few thousand lossy capacitive-based sensors that can be modeled as a parallel connection of sensor capacitor and undesirable leakage resistance. The real ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Surface Susceptibilities as Characteristic Models of Reflective Metasurfaces

Karim Achouri, Shourya Dutta Gupta, Ville Tuovi Tiukuvaara

While metasurfaces (MSs) are constructed from deeply subwavelength unit cells, they are generally electrically large and full-wave simulations of the complete structure are computationally expensive. Thus, to reduce this high computational cost, nonuniform ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

Kamil Sedlák, Xabier Sarasola Martin, Roberto Guarino, Nikolay Bykovskiy

A hybrid design of the Central Solenoid is under study within the conceptual design phase of the European DEMO fusion reactor. It is based on HTS conductors in the innermost high-field layers, and Nb3Sn and NbTi conductors for field values below 15 T. Sinc ...

2022

3PAC: A Plug-and-Play System for Distributed Power Sharing and Communication in Modular Robots

Jamie Paik, Christoph Heinrich Belke, Kevin Andrew Holdcroft

In modular robotics, there is classically a compromise between coupling complexity and functionality. The mechanical and electrical designs are linked, such that adding electrical features often requires redesigning the mechanical components. However, incr ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Interaction of lightning-generated electromagnetic fields with overhead and underground cables

Farhad Rachidi-Haeri, Marcos Rubinstein, Carlo Alberto Nucci

In this chapter, we discussed the TL theory and its application to the problem of lightning electromagnetic field coupling to transmission lines. After a short discussion on the underlying assumptions of the TL theory, we described seemingly different but ...

IET2022

A cryogenic electro-optic interconnect for superconducting devices

Tobias Kippenberg, Anton Lukashchuk, Nathan Rafaël Bernier, Liu Qiu, Itay Shomroni, Amir Youssefi, Philipp Johann Uhrich

A major challenge to the scalability of cryogenic computing platforms is the heat load associated with the growing number of electrical cable connections between the superconducting circuitry and the room-temperature environment. Compared with electrical c ...

2021

In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials

Danick Briand, Rubaiyet Iftekharul Haque, Sébastien Lani, Ryan Mitchell van Dommelen

In-situ laser sintering can be used to locally sinter conductive inks in an uninterrupted process, enabling the embedding of printed electronics within 3D printed structures. In this work we apply a laser sintering method to create highly conductive silver ...

2021

Dimensional scaling of thin-film stimulation electrode systems in translational research

Stéphanie Lacour, Giuseppe Schiavone, Nicolas Vachicouras, Yashwanth Sai Reddy Vyza

Objective. Electrical stimulation of biological tissue is an established technique in research and clinical practice that uses implanted electrodes to deliver electrical pulses for a variety of therapies. Significant research currently explores new electro ...

2021

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

Pierluigi Bruzzone, Boris Stepanov, Kamil Sedlák, Mithlesh Kumar

In the frame of the conceptual design studies for the Toroidal Field (TF) coils of DEMO, a solution based on a layer-wound magnet, rectangular-shaped Cable-in-Conduit conductors and W&R manufacturing approach, is being developed. The feasibility and perfor ...

IEEE Institute of Electrical and Electronics Engineers2021

Glazing unit

Andreas Schueler, Luc Burnier, Jérémy Jacques Antonin Fleury

The present invention concerns an insulating glazing unit (1) adapted to let pass electromagnetic radiation with low transmission loss for receiving electromagnetic radiation. The insulating glazing unit (1) comprises: a first windowpane (3) defining at le ...

2021

Enhanced-DAB Converter: Comprehensive Design Evaluation

Elison de Nazareth Matioli, Armin Jafari, Mohammad Samizadeh Nikooytabalvandani

Soft switching in dual-active-bridge (DAB) converters enables their efficient operation at high frequencies, where the reduction in the size of magnetic components could result in ultra-high power densities. Nonetheless, losing soft-switching at high frequ ...

IEEE2021

Design Study of a 50-kA React-and-Wind Bi-2212 Cable for Fusion Magnet

Davide Uglietti

In the last few years, the current density of Bi-2212 wires has been greatly improved by filament densify technologies. One further step toward applications in fusion magnets is to design a high current cable, which must overcome the drawbacks of Bi-2212 w ...

IEEE Institute of Electrical and Electronics Engineers2020

Gallium-Based Thin Films for Wearable Sensors and Electronic Skins

Laurent Mirko Dejace

Integrated wearable electronics capable of providing biophysical information on complex and dynamic systems have attracted high interest in diverse fields such as healthcare, gaming and robotics. Wearable sensors can create artificial, electronic skins wit ...

EPFL2020

Effect of input voltage frequency on the distribution of electrical stresses on the cell surface based on single-cell dielectrophoresis analysis

Philippe Renaud

Electroporation is defined as cell membrane permeabilization under the application of electric fields. The mechanism of hydrophilic pore formation is not yet well understood. When cells are exposed to electric fields, electrical stresses act on their surfa ...

Nature Research2020

AC Loss Measurement of the DEMO TF React&Wind Conductor Prototype No. 2

Pierluigi Bruzzone, Boris Stepanov, Kamil Sedlák

The EUROfusion DEMO is being designed as the fusion machine to be built after ITER. During the preconceptual phase, several design options are investigated by theoretical analyses as well as tests on newly developed conductor prototypes. One design option ...

IEEE Institute of Electrical and Electronics Engineers2020

Optical fibre sensing for fast hotspot detection in SFCLs

Luc Thévenaz, Bertrand Dutoit, Zhisheng Yang, Bertrand Dutoit, Sheng Wang, Arooj Akbar

The health monitoring of superconducting fault current limiters (SFCL) is important for their large-scale exploitation in HVDC grids protection. The intrinsic non-homogeneity of critical current along the superconductor length can cause localized points of ...

IOP Publishing Ltd2020