Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Enseignement et PhD Doctorant·es actuel·les Nicola Carrara, Berlind Vosberg, Maja Lopandic, Sneha Cheriyamparambil, Thanh Thi Hà Lê, Suqiu Jiang, Adam William Woodhouse, Kunita Numabe A dirigé les thèses EPFL de Stefano Tugulu, Markus Scholl, Harald Nuhn, Nadja Franz, Raphaël Barbey, Bojana Portmann, Maarten Danial, Dusko Paripovic, Sanhao Ji, Nicolas Bertrand Schüwer, Zuzana Kadlecova, Görçin Görkem Sahin Kurtuldu, Caroline Sugnaux, Sole
Daniel GörlEnseignement et PhD Cours Organic chemistry MSE-211 Cet enseignement fournit les bases de la chimie organique et de la chimie des polymères, dont notamment lanomenclature en chimie, les mécanismes de réaction ainsi que des méthodes de synthèse organique et de synthèse depolymères. Polymer science + TP MSE-360 Introduction à la physique des polymères et aux liens entre structures chimiques et propriétés macroscopiques, avec accent sur la morphologie et le comportement thermomé
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
Nikolaos StergiopoulosEducation
MTE, Managing the Technology Enterprise Program (2000), IMD, Lausanne
Ph.D. in Biomedical Engineering & Engineering Mechanics (1990) Iowa State University, Ames, Iowa.
MS in Biomedical Engineering (1987) Iowa State University, Ames, Iowa.
Diploma in Mechanical Engineering (1985) National Technical University of Athens.
Professional Activities
2002 - present: Professor and director of LHTC
2010 - present: Founder and director of Rheon Medical SA, Préverenges, Switzerland
2008 - present: Founder and director of Antlia S.A., PSE-C, EPFL campus, Switzerland
1998 - 2007: Founder and Scientific Director of EndoArt S.A., Lausanne, Switzerland
1996 - 2002: Assistant professor at the Biomedical Engineering Laboratory, Swiss Federal Institute of Technology, Lausanne, Switzerland.
1991 - 1996: Research Associate at Swiss Federal Institute of Technology - Lausanne
1990 - 1991: Lecturer, Iowa State University
Albert RenkenEnseignement et PhD A dirigé les thèses EPFL de Serge Maeder, Jacques Membrez, Stéphane Porchet, Philippe Menoud, Brigitta Frank, Harvey Randall, Wolfgang Zimmerer, Frédéric Van Vyve, Serge Golay, Jianzhong Yang, Stéphane Dubuis, Philippe Warnery, Anders Nattorp, Christian Spühler, Laurent Cavin, Miriam Lorenzi, Bastien Monnerat, André Rouge, Olivier Wolfrath, Peter Stahl, Ralf Maurer, Konrad Geissler, Volker Höller, Benoît Louis, Pierre Reuse, Fabio Rainone, Eric Joannet, Chrystèle Horny A co-dirigé les th
Véronique MichaudBackground: 1994 Habilitation à diriger des recherches ( INPG, France) 1991 PhD in Materials Engineering ( MIT, USA) 1987 Ingénieur Civil des Mines ( Ecole des Mines de Paris, France) Activités: Depuis Janvier 2018: Vice-Doyenne de la faculté des ingénieurs, en charge de l'éducation. Juin 2012-Dec.2017: Directrice de la Section Science et Génie des Matériaux Depuis Avril 2017, Professeur Associée EPFL 2009-2017 : Professeur Titulaire at EPFL 1997-2009 : collaboratrice Scientifique EPFL 1994-1997 : Chef de Travaux au laboratoire MSS-MAT, Ecole Centrale Paris (France) 1991-1994 : Post-doctoral research associate, MIT (USA) Environ 300 publications of which 140 in peer-reviewed journals
Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Dragan DamjanovicDragan Damjanovic received BSc diploma in Physics from the Faculty of Natural Sciences and Mathematics, University of Sarajevo, in 1980, and PhD in Ceramics Science from the Department of Materials Science and Engineering, College of Earth and Mineral Sciences, the Pennsylvania State University (PSU) in 1987. From 1988 to 1991 he was a research associate in the Materials Research Laboratory at the PSU. He joined the Ceramics Laboratory, Department of Materials Science and Engineering, Ecole polytechnique fédérale de Lausanne in 1991. He is currently a "professeur titulaire", heads the Group for Ferroelectrics and Functional Oxides at the Institute of Materials and teaches undergraduate and graduate courses on structure and electrical properties of materials. The research activities include fundamental and applied investigations of piezoelectric, ferroelectric and dielectric properties of a broad class of materials.
Frank NüeschEnseignement et PhD Doctorant·es actuel·les Elodie Didier, Ceren Mitmit, João Pedro Ferreira Assunção, Vahid Charkhesht A dirigé les thèses EPFL de Hui Zhang, Simon Johannes Dünki, Yee Song Ko, Lei Wang, Sandra Christina Jenatsch, Nicolas Alexandre Serge Leclaire, Donatas Gesevicius, Surendra Babu Anantharaman, Markus Regnat, Philip Horst Caspari, Patrik Schürch, David Reber, Karen Verena Strassel, Sina Abdolhosseinzadeh, Matthias Diethelm, Francis Owusu, Camilla Arietta Vael-Garn, Yeerlan Adeli, Wei-Hsu
Olivier MartinOlivier J.F. Martin a obtenu le diplôme (M.Sc.) et le doctorat en physique de l'Ecole Polytechnique Fédérale de Lausanne (EPFL) en 1989, respectivement 1994. En 1989 il a rejoint le laboratoire de recherche d'IBM à Rüschlikon près de Zurich, où il a étudié les propriétés optiques et thermiques des lasers semiconducteur. Entre 1994 et 1997 il était collaborateur scientifique de l'Ecole Polytechnique Fédérale de Zurich (ETHZ). En 1997 il a reçu une bourse Profil du Fonds National Suisse de la Recherche Scientifique (FNSRS) lui permettant de mettre sur pied un groupe de recherche indépendant. Entre 1996 et 1999, Olivier Martin a passé plus d'une année et demi aux U.S.A. comme collaborateur invité de l'Université de Californie à San Diego. En 2001 il a reçu une bourse de professeur assistant du FNSRS et devint professeur de Nano-optique à l'ETHZ. En 2003 il a été nommé professeur de nanophotonique et de traitement optique du signal à l'EPFL où il dirige actuellement le laboratoire de Nanophotonique & Métrologie.
Dominique PiolettiDominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
Mahmut Selman SakarEnseignement et PhD Doctorant·es actuel·les Lorenzo Francesco John Noseda, Nikita Norkin, Elif Ezgi Inan, Houman Javaheri, Mehdi Ali Gadiri, Julian Leon Raub, Junsun Hwang A dirigé les thèses EPFL de Erik Mailand, Raquel Filipa Penacho Parreira, Murat Kaynak, Lucio Pancaldi-Giubbini, Fazil Emre Uslu, Matthias Rüegg, Ece Özelçi, Emilie Vuille-Dit-Bille A co-dirigé les thèses EPFL de Laura Joan Hermans, Sourabh Monnappa Kuppanda Jafri Cours Dynamical systems ME-221 Introduction à la modélisa
Francesco StellacciFrancesco Stellacci graduated in Materials Engineering at the Politecnico di Milano in 1998 with a thesis on photochromic polymers with Prof. Giuseppe Zerbi and Mariacarla Gallazzi. In 1999 he moved to the Chemistry Department of the University of Arizona for as a post-doc in the group of Joe Perry in close collaboration with the group of Seth Marder. In 2002 he moved to the Department of Materials Science and Engineering at the Massachusetts Institute of Technology as an assistant professor. He was then promoted to associate without (2006) and with tenure (2009). In 2010 he moved to the Institute of Materials at EPFL as a full Professor. He holds the Alcan EP Chair. Francesco was one of the recipients of the Technology Review TR35 "35 Innovator under 35" award in 2005, and the Popular Science Magazine "Brilliant 10" award in 2007. He has been a Packard Fellow starting 2005.
Christophe MoserChristophe Moser is Associate Professor of Optics and the Section Director in the Microengineering department at EPFL. He obtained his PhD at the California Institute of Technology in optical information processing in 2000. He co-founded and was the CEO of Ondax Inc (acquired by Coherent Inc.), Monrovia California for 10 years before joining EPFL in 2010. His current interests are ultra-compact endoscopic optical imaging through multimode fibers, multimode fiber lasers, retinal imaging and additive manufacturing via volumetric 3D printing with light. He is the co-founder of Composyt light lab in the field of head worn displays in 2014 (acquired by Intel Corp), Earlysight SA and Readily3D. He is the author and co-author of 75 peer reviewed publications and 45 patents.
Thierry MeyerOriginaire de Genève, né en 1961, Thierry Meyer reçoit en 1986 son diplôme (MSC) dingénieur chimiste de lEcole Polytechnique Fédérale de Lausanne (EPFL). Il reçoit en 1989 son doctorat (PhD) à EPFL pour sa thèse sur le micromélange dans des milieux fortement visqueux. Il rejoint l'institut du génie chimique de 1989 jusqu'à 1993 en tant que scientifique senior dans le domaine des réactions de polymérisation. Il entre, en 1994, à la division " Pigments " de Ciba-Geigy SA, où il travaille au développement et à la mise en production de plusieurs pigments de hautes performances. Il assume la fonction de chef de projets pour l'introduction de nouveaux pigments en fabrication. En 1997, il est nommé chef de fabrication pour la production de la division pigments de Ciba Spécialités Chimiques SA à Monthey. Il est pendant cette même période nommé chargé de cours à l'EPFL. Retournant à l'institut du génie chimique d'EPFL à Lausanne vers la fin de 1998, il a été nommé « d'enseignement de maître et de recherche » (MER) pour mener un nouveau groupe de recherche dans le domaine des polymères et les fluides supercritiques, et enseigner aux chimistes, ingénieurs chimistes et en sciences des matériaux, les disciplines telles que le développement de procédés, l'introduction au génie chimique, le chimie organique et des polymères au programme de bachelor et master. En 2005 il assume la responsabilité du service de Sécurité et Santé au Travail de la faculté des sciences de base en plus de ses activités de recherches traitant de la gestion des risques (risk management) et des fluides supercritiques. Il enseigne actuellement l'introduction au génie chimique au niveau bachelor, le risk management au niveau master et des cours de formation continue dans le domaine de la sécurité (safety) et de la gestion des risques (engineering risk management). Il agit également comme consultant et expert en matière de risk management et génie chimique auprès du tribunal de l'ICC (chambre de commerce internationale) du World Business Organization, auprès de plusieurs bureaux d'études et de consultants ainsi quauprès dindustries. Thierry Meyer est actuellement membre de plusieurs associations internationales de la fédération Européenne du génie chimique et de la société chimique Américaine et American Institute of Chemical Engineers. Il a été élu Président de la European Working Party on Polymer Reaction Engineering de 2001 jusqu'à 2006. Il est actuellement le représentant académique Suisse dans la European Working Party on Loss Prevention and Safety Promotion et dans la European Working Party on Education. Il est membre de plusieurs editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
