Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Copper in architecture

Publications associées (20)

Beyond the coupled distortion model: structural analysis of the single domain cupredoxin AcoP, a green mononuclear copper centre with original features

Luciano Andres Abriata

Cupredoxins are widely occurring copper-binding proteins with a typical Greek-key beta barrel fold. They are generally described as electron carriers that rely on a T1 copper centre coordinated by four ligands provided by the folded polypeptide. The discov ...

Royal Soc Chemistry2024

Multiscale enhancement of refrigerant falling film boiling by combining commercially enhanced tubes with nanostructures

John Richard Thome

Multiscale surface structures offer the opportunity to combine the heat transfer enhancement provided by microscale structures with the dryout benefits provided by some nanostructures, which is particularly attractive for falling film evaporators, who have ...

Pergamon-Elsevier Science Ltd2023

Experimental study of stability, quench propagation and detection methods on 15 kA sub-scale HTS fusion conductors in SULTAN

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy, Ortensia Dicuonzo

High-temperature superconductors (HTSs) enable exclusive operating conditions for fusion magnets, boosting their performance up to 20 T generated magnetic fields in the temperature range from 4 K to 20 K. One of the main technological issues of HTS conduct ...

IOP Publishing Ltd2023

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Application of Copper Thermal Spraying for Electrical Joints between Superconducting Nb3Sn Cables

Pierluigi Bruzzone, Vincenzo D'Auria

This manuscript reports on the application of copper thermal spraying in the manufacturing process of an electrical connection between Nb3Sn cables for superconducting magnets of fusion reactors. The joint is realized through diffusion bonding of the spray ...

MDPI2022

Influence of thermo-mechanical processing on ordering kinetics in 18 karat red gold alloy

Marina Garcia Gonzalez

The aim of this project is to understand the correlation between alloy composition and the build-up of internal stresses in 18 carat Au-Ag-Cu alloys under thermo-mechanical loads. The copper rich end of this ternary system exhibits order-hardening of the e ...

EPFL2020

Stability and Degradation Mechanisms of Copper-Based Catalysts for Electrochemical CO2 Reduction

Raffaella Buonsanti, Jan Vávra

To date, copper is the only monometallic catalyst that can electrochemically reduce CO2 into high value and energy-dense products, such as hydrocarbons and alcohols. In recent years, great efforts have been directed towards understanding how its nanoscale ...

Wiley-VCH Verlag GmbH2020

Species-species interactions modulate copper toxicity under different visible light conditions

Vera Slaveykova-Startcheva, Valérie Gagnaux

Combination of biotic and abiotic factors influences the effects of naturally occurring or anthropogenic chemicals on photosynthetic microorganisms in the aquatic environment. Nonetheless, the combined effects of physical stressors and species-species inte ...

ACADEMIC PRESS INC ELSEVIER SCIENCE2019

Radiation enhanced oxidation of proton-irradiated copper thin-films: Towards a new concept of ultra-high radiation dosimetry

Jean-Michel Sallese, Didier Bouvet, Georgi Gorine

The effects of extreme radiation levels on the electrical resistivity of metal thin films made of copper were studied by means of electrical measurements and post irradiation imaging. Different 3x3 mm(2) chips were produced by depositing 500 nm of meander ...

2019

Reconsidering traditional timber joinery for sustainable structures

Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting

Timber construction plays an important role in architectural history, in modern construction methods and in sustainable design, for which wood-only joinery techniques have been used for centuries. Traditional joinery typologies are the product of successiv ...

2018

Ductility and strain rate-dependency of adhesively-bonded timber joints

Myrsini Angelidi

One of the most important characteristics of load-bearing structures is ductility, i.e. the ability of a material or a structure to sustain inelastic deformation prior to failure, without loss of resistance. The topic of this PhD Thesis was to develop duct ...

EPFL2017

Ductility of adhesively bonded timber joints

Thomas Keller, Anastasios Vassilopoulos, Myrsini Angelidi

In the field of timber engineering, adhesive bonding remains a promising, though poorly developed, joining technique that may increase the structural stiffness and capacity of timber joints and structures. Selecting ductile adhesives may further allow to c ...

WIT Press2017

Copper-catalysed cyanoalkylative cycloetherification of alkenes to 1,3-dihydroisobenzofurans: development and application to the synthesis of citalopram

Jieping Zhu, Qian Wang, Minh Tu Ha

A copper-catalysed cyanoalkylative cycloetherification of alkenes was developed. Heating a solution of substituted (2-vinylphenyl)methanol in MeCN/MeOH (v/v 7/3) in the presence of a catalytic amount of copper(II) tetrafluoroborate hydrate [Cu(BF4)26H2O], ...

Royal Society of Chemistry2016

Intrachain antiferromagnetic exchange in a 1D branched-chain built of two different copper(II) centres interlinked by end-on azido and phenoxo bridges: electron density map, electrochemical and magnetic properties

Henrik Moodysson Rønnow, Kurt Schenk, Philip Pattison, Krunoslav Prsa, Noore Elahi Shaik, Arash Alahgholipour Omrani

A 1D, end-on azido- and phenoxo-bridged, coordination polymer, Cu-2(mu-NAPPR)(mu(1,1)-N-3)(2) (1), (NAPPR(2-) = 1,3-bis(naphthylideneimino) propane dianion), was synthesized and characterized. The 1D branched-chain is built of two types of slightly di ...

2015

Copper-Catalyzed Alkylation of Benzoxazoles with Secondary Alkyl Halides

Rosario Scopelliti, Xile Hu, Peng Ren

Copper-catalyzed direct alkylation of benzoxazoles using nonactivated secondary alkyl halides has been developed. The best catalyst is a new copper(I) complex (1), and the reactions are promoted by bis[2-(N,N-dimethylamino)ethyl] ether. ...

American Chemical Society2012

Substance flow analysis as a tool for urban water management

Luca Rossi, Nathalie Chèvre Rossi

Human activity results in the production of a wide range of pollutants that can enter the water cycle through stormwater or wastewater. Among others, heavy metals are still detected in high concentrations around urban areas and their impact on aquatic orga ...

IWA Publishing2011

Development of a Hybrid MEMS BLDC Micromotor

Yves Perriard, Christian Köchli, Sebastiano Merzaghi

This paper addresses the design of a new hybrid MEMS micromotor. It is a small 3-phases axial flux BLDC motor. The stator is realized following the almost CMOS technology rules used for MEMS manufacture and the coils have two copper layers. The rotor is ma ...

2009

Nuclear responses in IFMIF creep-fatigue testing machine

The International Fusion Materials Irradiation Facility (IFMIF) is an intense high-energy neutron source dedicated to the development and qualification of materials for the first generation of fusion reactors. The target facility will consist of a high flu ...

Elsevier2008

Detection of proteins on membranes and in microchannels using copper staining combined with Scanning Electrochemical Microscopy

Hubert Girault, Niels Erik Lion

Scanning Electrochemical Microscopy (SECM) and copper staining are combined to achieve visualisation of proteins on surfaces. Proteins are adsorbed on a polyvinylidene fluoride (PVDF) membrane or on a polyethylene terephthalate (PET) surface and stained us ...

2007

System ductility and redundancy of FRP structures with ductile adhesively-bonded joints

Julia De Castro San Roman Fest

Fiber-reinforced polymer (FRP) composites offer several advantages in relation to traditional materials, such as high specific strength, good corrosion resistance, low thermal conductivity and rapid component installation. Despite the great potential of th ...

EPFL2005