Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Design for Manufacturing

Publications associées (29)

3D diffractive optics for linear interconnects and nonlinear processing

Niyazi Ulas Dinç

The optical domain presents potential avenues for enhancing both computing and communication due to its inherent properties of bandwidth, parallelism, and energy efficiency. This research focuses on harnessing 3-Dimensional (3D) diffractive optics for nove ...

EPFL2024

Design and manufacture of edible microfluidic logic gates

Dario Floreano, Bokeon Kwak, Shuhang Zhang

Edible robotics is an emerging research field with potential use in environmental, food, and medical scenarios. In this context, the design of edible control circuits could increase the behavioral complexity of edible robots and reduce their dependence on ...

IEEE2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Duccio Testa, Ambrine Douhane, Marcus Cemes

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Dielectrophoretic Traps for Efficient Bead and Cell Trapping and Formation of Aggregates of Controlled Size and Composition

Philippe Renaud, Arnaud Bertsch, Clémentine Sophie Sarah Lipp

We present a microfluidic dielectrophoretic-actuated system designed to trap chosen single-cell and form controlled cell aggregates. A novel method is proposed to characterize the efficiency of the dielectrophoretic trapping, considering the flow speed but ...

2022

Multi-configuration evaluation of a megajoule-scale high-temperature latent thermal test-bed

Sophia Haussener, Clemens Gregor Suter, Selmar Rudolf Binder, Nithin Mallya

Thermal energy storage via latent heat provides an energy dense solution and, during discharge, a hot stream at a well-defined temperature. Utilizing metal phase change materials (PCMs) and high-temperature operation might enable fast (dis)charging and app ...

PERGAMON-ELSEVIER SCIENCE LTD2022

A semantic-driven tradespace framework to accelerate aircraft manufacturing system design

Dimitrios Kyritsis, Jinzhi Lu, Xiaochen Zheng

During the design phase of an aircraft manufacturing system, different industrial scenarios need to be evaluated according to key performance indicators to achieve the optimal system performance. It is a highly complex process involving multidisciplinary s ...

SPRINGER2022

A generic methodology and a digital twin for zero defect manufacturing (ZDM) performance mapping towards design for ZDM

Foivos Psarommatis Giannakopoulos

Over recent years, the manufacturing industry has seen constant growth and change. From one side, it has been affected by the fourth industrial revolution (Industry 4.0). From the other side, it has had to enhance its ability to meet higher customer expect ...

2021

Bias free multiobjective active learning for materials design and discovery

Berend Smit, Kevin Maik Jablonka, Shi-Lin Wang

The design rules for materials are clear for applications with a single objective. For most applications, however, there are often multiple, sometimes competing objectives where there is no single best material and the design rules change to finding the se ...

Nature Research2021

On the Application of Small-Scale Turbines in Industrial Steam Networks

François Maréchal, Jürg Alexander Schiffmann, Ivan Daniel Kantor, Ansgar Weickgenannt

This study investigates the technical and economic feasibility of replacing throttling valves with smale-scale, oil-free turbomachinery in industrial steam networks. This is done from the perspective of the turbomachine, which has to be integrated into a n ...

2021

Unstable tilting motion of flexibly supported gas bearing bushings

Jürg Alexander Schiffmann, Philipp Kaspar Bättig

This paper presents measurements of the motion amplitudes from flexibly supported Herringbone Grooved Journal Bearing bushings. Measurements taken in four locations on the flexibly supported bearing bushing enable the distinction between the radial and the ...

2022

Delivery, Beam and Range Monitoring in Particle Therapy in a Highly Innovative Integrated Design

Enrico Felcini

The design of a particle therapy system that integrates an innovative beam delivery concept based on a static toroidal gantry and an imaging configuration suitable for beam and online range monitoring is proposed and discussed. Such approach would provide ...

2020

Stretchable Kirigami Components for Composite Meso-Scale Robots

Jamie Paik, Amir Firouzeh

Layer-by-layer manufacturing of composite mechanisms allows fast and cost-effective fabrication of customized robots in millimeter and centimeter scales which is promising for research fields that rely on frequent and numerous physical iterations. Due to t ...

2020

Integration of hybrid material systems in conformable neural interfaces

Florian Dylan Fallegger

Neural interfaces are devices that are implanted into the body and interface electrically with the central (CNS) or peripheral nervous system. They are inserted surgically for short periods of time or chronically to diagnose or treat several neural disease ...

EPFL2020

Design guidelines for Al-12%Si latent heat storage encapsulations to optimize performance and mitigate degradation

Sophia Haussener, Selmar Rudolf Binder

We provide detailed insight into the growth kinetics of intermetallic layers formed at the interface of molten Al-12%Si with cylindrical encapsulations of 316L stainless steel. This knowledge is relevant for the design and operation of high-temperature lat ...

ELSEVIER2020

Mitochondrial ph probe

Anders Meibom, Matthias Lütolf, Gennady Nikitin

The present invention relates to dual fluorophore ratiometric mitochondrial pH probes, their uses and their manufacture. ...

2019

Classic Electrically Small Antennas Versus in/On-Body Antennas: Similarities and Differences

Anja Skrivervik

Electrically small antennas (ESAs) have been discussed since the early radio days, when all antennas were small compared to the wavelength. The boom of mobile phones triggered a second wave of intense research activity on these devices, which continues tod ...

The European Associationa onAntennas and Propagation (EurAAP)2019

Hardware/Software Co-Design and Reliability Analysis of Ultra-Low Power Biomedical Devices

Soumya Subhra Basu

Smart health monitoring devices, known as Wireless Body Sensor Nodes (WBSN) are transforming today's health-care landscape, shifting it from traditional hospital-based methods toward more personalized approaches. Their demand is ever-increasing in the mode ...

EPFL2019

Toward ultra-low power design methodology for frequency generation in the IoT design space

Mathieu Yves Hervé Coustans

Today, the semiconductor industry is feeding our digital world with more and more data coming from compact embedded electronics that are monitoring our environment and feeding analytics for action. Interaction with our digital world is mostly achieved thro ...

EPFL2019

Design rules for Unipolar Unicolor Coded Brillouin Optical Time Domain Analysis

Luc Thévenaz, Marcelo Alfonso Soto Hernandez, Zhisheng Yang, Simon Adrien Zaslawski

The performance of unipolar unicolor coded Brillouin optical time-domain analysis (BOTDA) is thoroughly studied, providing quantitative guidelines to design a distortion-free coded BOTDA system operating at maximum signal-to-noise ratio. ...

Optical Society of America2018

Design rules for customizable optical materials based on nanocomposites

Toralf Scharf

Nanocomposites with tailored optical properties can provide a new degree of freedom for optical design. However, despite their potential these materials remain unused in bulk optical applications. Here we investigate the conditions under which they can be ...

OPTICAL SOC AMER2018