Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Fil métallique

Publications associées (25)

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

Farhad Rachidi-Haeri, Marcos Rubinstein

In online single-sided partial discharge (PD) location, the measured PD reflection patterns are affected by the characteristics of all the components of the associated power network. This paper analyses the performance of a PD location method based on elec ...

2024

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Chiara Frittitta, Federica Demattè

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

DTT toroidal field conductor samples test in Sultan: DC and AC characterization

Kamil Sedlák, Mattia Ortino, Hugues Marie Alain Bajas

The superconducting magnet system of the Divertor Tokamak Test (DTT) facility, composed of 18 toroidal field (TF) coils, 6 poloidal field coils and a central solenoid, has been designed and many procurements have been launched. Some manufacturing aspects a ...

Iop Publishing Ltd2024

Modeling, Optimization and Design of High Power Medium Frequency Transformers

Nikolina Djekanovic

Nowadays, direct current (DC) technology is increasing its presence in alternating current (AC) power systems. This trend is enabled by the progress in energy conversion through semiconductor devices and power electronics. Therefore, it is possible to imag ...

EPFL2023

Time-Domain Integration of Broadband Terahertz Pulses via Tapered Two-Wire Waveguide

Alessandro Tomasino

In this work, we report on the implementation of a time-domain integrator device operating on arbitrary broadband Terahertz (THz) pulses. This analog signal-processing functionality is implemented by employing a two-wire waveguide (TWWG) variant, based on ...

IEEE2023

Metal-wire-embedded alumina insulating material using micro- and nanoscale 3D printing for surface flashover mitigation in a vacuum

Guang-Yu Sun

A micro- and nanoscale 3D printing technique is applied to fabricate a functional insulating material that mitigates surface discharge in a vacuum based on microscopic electron multipactor suppression. The proposed alumina ceramic insulator design consists ...

2022

Optical rotating torque sensor with nano newton-meter resolution based on a hanging torsion wire

Simon Nessim Henein, Etienne Frédéric Gabriel Thalmann, Billy Nussbaumer

This article presents a novel torque measuring setup working in the nano newton-meter range. The central novelty is a long (1 meter range) thin (diameter of a few tens of micrometers) metallic wire used instead of the relatively stiff torsion zone of the s ...

euspen2021

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

Pierluigi Bruzzone, Boris Stepanov, Kamil Sedlák, Mithlesh Kumar

In the frame of the conceptual design studies for the Toroidal Field (TF) coils of DEMO, a solution based on a layer-wound magnet, rectangular-shaped Cable-in-Conduit conductors and W&R manufacturing approach, is being developed. The feasibility and perfor ...

IEEE Institute of Electrical and Electronics Engineers2021

Small scale very high speed slotless permanent magnet motors

Guillaume Paul-André Burnand

This research work has been triggered by an industrial project aimed at modelling and manufacturing a small-scale very high speed motor. Very high speed electrical motors offer the main advantage of reducing the size of a system. Indeed, at constant output ...

EPFL2020

On the representation of thin wires inside lossy dielectric materials for FDTD‐based LEMP simulations

Farhad Rachidi-Haeri, Marcos Rubinstein, Akiyoshi Tatematsu

The finite-difference time-domain method is one of the most widely used numerical electromagnetic computation techniques, and it has become an effective tool for analyzing electromagnetic transient phenomena in three-dimensional structures and grounding sy ...

2019

A review of commercial high temperature superconducting materials for large magnets: from wires and tapes to cables and conductors

Davide Uglietti

High temperature superconducting (HTS) materials have the potential to generate a magnetic field beyond the level obtainable with low temperature superconducting (LTS) materials. This review reports on past and present R&D on HTS cables and conductors for ...

IOP Publishing Ltd2019

Ductility reduction factor formulations for seismic design of RC wall and frame structures

Katrin Beyer, Matteo Zerbin

Seismic design of standard structures is typically founded on a force-based design approach. Over the years this approach has proven robust and easily applicable by design engineers and - in combination with capacity design principles - it provides a good ...

2019

Lorentz Force from a Current-Carrying Wire on a Charge in Motion under the Assumption of Neutrality in the Symmetrical Frame of Reference

Marcos Rubinstein, Antonio Sunjerga

It is commonly assumed that a wire conducting an electric current is neutral in the laboratory frame of reference (the rest frame of the lattice of positive ions). Some authors consider that the wire is neutral only in a symmetrical frame of reference, in ...

2018

Steel Wire Mesh as a Thermally Resistant SERS Substrate

Tomasz Radoslaw Szymborski

In this paper, we present novel type of Surface-enhanced Raman spectroscopy (SERS) platform, based on stainless steel wire mesh (SSWM) covered with thin silver layer. The stainless steel wire mesh, typically used in chemical engineering industry, is a chea ...

MDPI2018

Locating lightning strikes and flashovers along overhead power transmission lines using electromagnetic time reversal

Mario Paolone, Gianluca Antonini, Reza Razzaghi, Keyhan Sheshyekani

The paper presents a method to identify the location of direct lightning strikes to overhead transmission lines and potential subsequent flashover(s). The method is based on the electromagnetic time reversal theory and relies on the use of a single measure ...

Elsevier2018

Effect of Dispersive Soil on the Electromagnetic Response of Buried Wires in the UHF Range

In this paper, we analyze the effect of the soil on the induced current in a buried wire excited by an external field in the ultrahigh frequency range. We use an extended version of the Messier model, which provides the electromagnetic (EM) properties of d ...

2018

HTS high current cable for fusion application

Nikolay Bykovskiy

State-of-the-art magnets of fusion devices, which are based on low temperature superconductors (LTS), have almost reached their technological limits in terms of generated magnetic fields. Further progress can be made using novel high temperature supercondu ...

EPFL2017

Insulation effect on thermal stability of Coated Conductors wires in liquid nitrogen

Bertrand Dutoit, Bertrand Dutoit

Superconducting wires are not perfectly homogeneous in term of critical current as well as stabilization. In resistive fault current limiter applications this could lead to hot spots if the fault current is only slightly above the nominal current of the de ...

Iop Publishing Ltd2017

Design Optimization of Round Strands Made by Twisted Stacks of HTS Tapes

Pierluigi Bruzzone, Davide Uglietti, Rainer Wesche

Atwisted stack of high-temperature superconducting (HTS) tapes soldered into copper profiles was used as a strand in the fabrication of the 60-kA/ 12-T HTS cable prototype at the Center for Research in Plasma Physics (CRPP). Considering the strand in gener ...

IEEE Institute of Electrical and Electronics Engineers2016

Nuclear Quantum Effects in H+ and OH- Diffusion along Confined Water Wires

Michele Ceriotti, Mariana Rossi Carvalho

The diffusion of protons and hydroxide ions along water wires provides an efficient mechanism for charge transport that is exploited by biological membrane channels and shows promise for technological applications such as fuel cells. However, what is lacki ...

Amer Chemical Soc2016