Jean-Marie Drezet1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) Dimitrios LignosProf. Lignos joined the École Polytechnique Féderale de Lausanne (EPFL) in 2016 from McGill University in Canada where he was a tenured Associate Professor and a William Dawson Scholar for Infrastructure Resilience. He holds a diploma (National Technical University of Athens, NTUA, 2003), M.S. (Stanford University, 2004) and Ph.D. (Stanford University, 2008). In addition, he was a post-doctoral scientist at Stanford University (2009) and in Kyoto University (2010). Prof. Lignos teaches graduate and undergraduate courses in seismic design, nonlinear behaviour of steel and composite structures as well as supplemental damping systems, Structural Stability, Nonlinear Analysis and Performance-based Earthquake Engineering. His awards for teaching, research and service in Civil Engineering include the 2011 Outstanding Teaching Award (Faculty of Engineering, McGill University), as well as the Outstanding reviewer (2012, 2013) award from ASCE, the 2013 State-of-the-Art in Civil Engineering Award by ASCE and the 2014 Christophe Pierre Award for Research Excellence - Early Career. Just recently, he received the 2019 Walter L. Huber Civil Engineering Research Prize from ASCE for significant contributions in developing state of the art methods to simulate extreme limit states in steel structures.Prof. Lignos is a member of ASCE and the Earthquake Engineering Research Institute. He acts as an Associate Editor for Metal Structures and Seismic Effects of the ASCE Journal of Structural Engineering. He joined the Editorial Board of Earthquake Spectra and Earthquake Engineering and Structural Dynamics International journals. He serves as an acting member of the CEN/TC 250/SC 8/WG 2 and has been selected as a member of the Project Team (PT2) for the Eurocode 8-Part 1 Current Revisions for Steel and Composite Structures. He is also a member of the Canadian Standards Association (CSA) S16 technical committee for Steel Structures. Prof. Lignos is involved as a NEHRP consultant in numerous research-to-practice projects related to the behaviour and nonlinear modelling and analysis of structures applicable to the engineering practice through the Applied Technology Council (ATC). Detailed Curriculum Vitae (last update September 2018)
Kumar Varoon AgrawalEnseignement et PhD Doctorant·es actuel·les Fabian Yuki Scheffler, Archisman Ghosh, Shaoyu Wang, Amin Bouzaiene, Shuqing Song, Anu Pulparambil, Ceren Kocaman, Moein Fazli Mamaghani, Stefania Bempeli, Yueqing Shen, Daniele Micucci, Samson Xavier Robbins, Mahesh Manikantan Sandhya A dirigé les thèses EPFL de Shiqi Huang, Mojtaba Chevalier, Mostapha Dakhchoune, Wan-Chi Lee, Mohammad Tohidivahdat, Shaoxian Li, Heng-Yu Chi, Kuang-Jung Hsu, Luc Sébastien Bondaz Cours Chemical engineering product design
John BotsisJohn (Ioannis) Botsis obtained his diplôme in civil engineering at the University of Patras, Greece in 1979. He continued his education at Case Institute of Technology in Cleveland Ohio/USA, where he received his MS and Ph.D. in 1984. After two years at the research center for national defense in Athens he was nominated assistant professor at the University of Illinois in Chicago, associate in 1991 and full professor in 1995. In 1996, he was nominated professor of solids and structural mechanics at the EPFL. At EPFL he teaches mechanics of structures and mechanics of continuous media´ at the bachelors level and Fracture mechanics at the masters and doctoral levels. His research covers the mechanics of solids and structures, fracture mechanics and micromechanics of polymers, metals and their composites as well as biomechanics. He is also actively involved in full-filed optical methods for surface strain measurements as well as internal strain measurements using fiber Bragg grating sensors, aimed at characterizing micromechanics of fracture, residual strains and strain distribution in composite laminates for structural monitoring. Funding for his research comes from the Swiss National Science Foundation, State Secretariat for Education and Research and Swiss industry. He retired on February 28, 2020.
Anastasios VassilopoulosEnseignement et PhD Doctorant·es actuel·les Filippo Mannino, Joseph Vincent Arnaud Bernaert, Seyed Shayan Khalooei Tafti A dirigé les thèses EPFL de Alireza Farajzadeh Moshtaghin, Abdolvahid Movahedirad, Dharun Vadugappatty Srinivasan A co-dirigé les thèses EPFL de Ye Zhang, Behzad Dehghan Manshadi, Omar Moussa, Roohollah Sarfaraz Khabbaz, Moslem Shahverdi, Wei Sun, Haifeng Fan, Maria Savvilotidou, Myrsini Angelidi, Aida Cameselle Molares, Niloufar Vahedi, Jialiang Fan, Congzhe Wang Cours Advanced compo
Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Daniel Alexander Florez OrregoEnseignement et PhD Doctorant·es actuel·les Vibhu Baibhav Cours Advanced energetics ME-451 Méthodes pour l'utilisation rationnelle et la conversion de l'énergie dans les processus industriels: comment analyser l'utilisation de l'énergie, calculer la récupération de chaleur par analyse de pincement, définir le réseau d'échangeurs thermiques et réaliser une analyse exergétique.
Franz-Josef HaugI studied Physics between 1990 and 1996 at the Universities of Ulm (Germany) and Waikato (New Zealand). While specializing mostly on Theoretical Physics and Quantum Theory during my studies, I turned towards Experimental Physics for a graduate work on gas-phase epitaxy of silicon. After that, I pursued a PhD program at ETH Zürich (Switzerland), studying Cu(In,Ga)Se2 solar cells. As PostDoc, I went to EMPA (Switzerland) to work on plasma processes for hard coatings of TiN and to the Jülich Research Centre in Germany to study light scattering ZnO front contacts for solar cells. In 2005 I joined the Institute of Microengineering (IMT) at the University of Neuchatel to lead a research group on thin film silicon solar cells within the PV-Lab. In 2009 the IMT was integrated into EPFL. My main research interests are optics, charge transport in semiconductors and renewable energy in general. My current work is devoted to passivating contacts for crystalline silicon solar cells, using thin silicon films as contact layers. In 2015 I was appointed Maitre d'Enseignement et Recherche (Senior Lecturer and Scientist) and member of the Faculty of STI. From 2013 to 2015 I was member of the EFPL Teachers Council (CCE) and from 2016 and 2018 I was elected into the Council of the Engineering School (CF-STI). In 2020 I was elected to become a member of CF-STI. My main objective for the legislature is to represent the role of EPFL's intermediate staff and to raise the awareness for concerns of the satellite campuses.
Jan Van HerleNé à Anvers, Belgique, 1966. En Suisse depuis 1983. Naturalisé Suisse en 2004 par persuasion de la culture suisse démocratique et participative 'bottom-up'. Pas de double nationalité. Conseiller communal durant 2 mandats de 5 ans de 2006 à 2016.
1987 : Chimiste de l'Université de Bâle (CH).
1988 : Post-grade informatique de l'Ecole d'Ingénieurs de Bâle.
1989 : Stage industriel chez ABB à Baden (CH).
1990-1993 : Thesè EPFL
1994-1995 : Postdoc au Japon (Tokyo).
1996-2000 : Chercheur à l'EPFL, Dpt. Chimie, responsable de groupe.
1998-2000 : Master en Energy Technology, EPFL.
2000 : Cofondateur de HTceramix SA (EPFL spin-off), à Yverdon (actuellement 12 employés). La maison mère SOLIDpower en Italie, qui a acheté notre technologie en 2007, emploie 250 personnes et a levé 70 MCHF.
2000-2012 : 1er Assistant et chargé de cours en STI-IGM. Promu à MER en 2008.
2013-présent: MER responsable d'unité.
Output : 135 publications, 120 papiers de conférence, 15 théses de doctorat, 4 thèses en cours, 37 thèses de master. Facteur h-42, >5000 citations.
Fonds levés jusqu'à présent >19 MCHF.
5 langues couramment (néerlandais, français, allemand (y.c. suisse-allemand), anglais, espagnol).
Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Alain Michel PrenleloupEnseignement et PhD Cours Mécanique des structures (pour GM) ME-232 L'étudiant acquiert les bases de l'analyse des contraintes et déformation des poutres élastiques linéaires soumises à la traction, cisaillement, torsion, flexion; les coefficients d'influence et la méthode de l'énergie pour analyser des systèmes isostatiques et hyperstatiques; critères de rupture.
Olivier MartinOlivier J.F. Martin a obtenu le diplôme (M.Sc.) et le doctorat en physique de l'Ecole Polytechnique Fédérale de Lausanne (EPFL) en 1989, respectivement 1994. En 1989 il a rejoint le laboratoire de recherche d'IBM à Rüschlikon près de Zurich, où il a étudié les propriétés optiques et thermiques des lasers semiconducteur. Entre 1994 et 1997 il était collaborateur scientifique de l'Ecole Polytechnique Fédérale de Zurich (ETHZ). En 1997 il a reçu une bourse Profil du Fonds National Suisse de la Recherche Scientifique (FNSRS) lui permettant de mettre sur pied un groupe de recherche indépendant. Entre 1996 et 1999, Olivier Martin a passé plus d'une année et demi aux U.S.A. comme collaborateur invité de l'Université de Californie à San Diego. En 2001 il a reçu une bourse de professeur assistant du FNSRS et devint professeur de Nano-optique à l'ETHZ. En 2003 il a été nommé professeur de nanophotonique et de traitement optique du signal à l'EPFL où il dirige actuellement le laboratoire de Nanophotonique & Métrologie.
Nadine BalucEnseignement et PhD A dirigé les thèses EPFL de Emmanuelle Giacometti, Raluca Schibli, Gang Yu, Bin Long, Lyubomira Veleva
Eugen BrühwilerExpertise
structural and material engineering of existing civil structures in particular bridges of high cultural value; fatigue, dynamics and structural behaviour of bridges; Ultra-high performance fiber reinforced cementitious composites and composite UHPFRC - RC structures.
Expertise
structural and material engineering of existing civil structures in particular bridges of high cultural value; fatigue, dynamics and structural behaviour of bridges; Ultra-high performance fiber reinforced cementitious compo
Dragan DamjanovicDragan Damjanovic received BSc diploma in Physics from the Faculty of Natural Sciences and Mathematics, University of Sarajevo, in 1980, and PhD in Ceramics Science from the Department of Materials Science and Engineering, College of Earth and Mineral Sciences, the Pennsylvania State University (PSU) in 1987. From 1988 to 1991 he was a research associate in the Materials Research Laboratory at the PSU. He joined the Ceramics Laboratory, Department of Materials Science and Engineering, Ecole polytechnique fédérale de Lausanne in 1991. He is currently a "professeur titulaire", heads the Group for Ferroelectrics and Functional Oxides at the Institute of Materials and teaches undergraduate and graduate courses on structure and electrical properties of materials. The research activities include fundamental and applied investigations of piezoelectric, ferroelectric and dielectric properties of a broad class of materials.
Alain NussbaumerExpertise
Structures métalliquesVerre structuralFatigue et mécanique de la ruptureEvaluation de structures existantesRupture à faible nb de cycles
Mission
RECHERCHE: Responsable du domaine de recherche « fatigue et rupture des structures en acier ». Expert dans les domaines de la fatigue et rupture de structures en acier, aluminium et verre, sécurité et aptitude au service, ainsi que les éléments composés de plusieurs matériaux.Habilité à diriger des thèses de doctorat depuis 2005.ENSEIGNEMENT: Responsable
