Alejandro Roda BuchExpertise
TribologyContact Mechanics ModelingData AcquisitionDynamics of Mechanical SystemsData Science
Stefano MischlerStefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
Jean-Marie Drezet1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Mohamed FarhatM. Farhat was born in Casablanca in 1962 (Moroccan citizen). He graduated at Ecole Nationale Supérieure d'Hydraulique et de Mécanique de Grenoble (France. He joined The LMH laboratory in 1986 as research assistant. He completed in 1994 a Ph.D. thesis on Cavitation. He joined the R&D department of Hydro-Quebec in Montréal (Canada) in 1995 where he was in charge of several research projects in the areas of production and transportation of hydropower and mainly the monitoring of large hydro turbines. Since 2001, he is senior scientist at the LMH laboratory, head of the cavitation group. He is also lecturer in Master and Doctoral programs. He is member of the Doctoral Committee in Mechanics.
Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Enseignement et PhD Doctorant·es actuel·les Nicola Carrara, Berlind Vosberg, Maja Lopandic, Sneha Cheriyamparambil, Thanh Thi Hà Lê, Suqiu Jiang, Adam William Woodhouse, Kunita Numabe A dirigé les thèses EPFL de Stefano Tugulu, Markus Scholl, Harald Nuhn, Nadja Franz, Raphaël Barbey, Bojana Portmann, Maarten Danial, Dusko Paripovic, Sanhao Ji, Nicolas Bertrand Schüwer, Zuzana Kadlecova, Görçin Görkem Sahin Kurtuldu, Caroline Sugnaux, Sole
Anna Neus Igual MuñozEnseignement et PhD Doctorant·es actuel·les Quentin Gérard Jean-Charles Ursule A co-dirigé les thèses EPFL de Marian Nida Sagarino Lumongsod-Thompson Cours CCMX Tribology and Surfaces Interactions MSE-667 Characterization of Materials 2025 MSE-716 Corrosion et protection des métaux + TP MSE-311 Ce cours d'introduction à la corrosion veut familiariser l'étudiant avec les mécanismes réactionnels de la corrosion, avec les différentes formes de corrosion et avec
Simone DeparisExpertise
Simone Deparis est professeur à l’EPFL, spécialisé en mathématiques appliquées, analyse numérique et didactique des mathématiques à l’université. Ses recherches portent à la fois sur la modélisation computationnelle pour les applications biomédicales et sur l’innovation pédagogique, avec un accent sur l’équité, l’auto-efficacité et la réforme de l’évaluation dans les grands cursus scientifiques.
Mission
Mes recherches portent sur les mathématiques appliquées et les sciences de l’apprentissage. En
Marie Estelle Solange ViolayEnseignement et PhD Doctorant·es actuel·les Cindy Mikaelian, Francesco Lazari, Franco Matías Robbiano Muñoz, Karin Andrea Hofer Apostolidis, Andrea Mazzeo A dirigé les thèses EPFL de Felipe Orellana, Mateo Acosta, Chiara Cornelio, Corentin Noël, Federica Paglialunga, Antoine Guggisberg Cours Designing Testing Machines for Geomechanics ME-700 Géologie CIVIL-211 Les ingénieurs civils exercent leurs activités en constante interaction avec le sous-sol.Le cours de géologie donne
Guillaume AnciauxEnseignement et PhD Doctorant·es actuel·les Parissasadat Alavi, Thibault Ghesquière-Diérickx A co-dirigé les thèses EPFL de Srinivasa Babu Ramisetti, Jaehyun Cho, Lucas Frérot, Mohit Pundir, Manon Eugénie Voisin--Leprince Cours Modélisation numérique des solides et structures CIVIL-321 La modélisation numérique des solides est abordée à travers la méthode des éléments finis. Les aspects purement analytiques sont d'abord présentés, puis les moyens d'interpolation, d'intégration et de résolu
