Publications associées à Batteur d'or

Publications associées (28)

A customized MOF-polymer composite for rapid gold extraction from water matrices

Wendy Lee Queen, Daniel Teav Sun, Shuliang Yang, Jun Li, Li Peng, Olga Syzgantseva

With the fast-growing accumulation of electronic waste and rising demand for rare metals, it is compelling to develop technologies that can promotionally recover targeted metals, like gold, from waste, a process referred to as urban mining. Thus, there is ...

AMER ASSOC ADVANCEMENT SCIENCE2023

Ultimate Limit for Optical Losses in Gold, Revealed by Quantitative Near-Field Microscopy

Sergejs Boroviks

We report thorough measurements of surface plasmon polaritons (SPPs) running along nearly perfect air-gold interfaces formed by atomically flat surfaces of chemically synthesized gold monocrystals. By means of amplitude-and phase-resolved near-field micros ...

AMER CHEMICAL SOC2022

Mapping Spatial Distribution of Pores in an Additively Manufactured Gold Alloy Using Neutron Microtomography

Roland Logé, Jamasp Jhabvala, Hossein Ghasemi Tabasi

A crucial criterion for the quality of the additively manufactured parts is the porosity content for achieving an acceptable final relative density. In addition, for jewelry applications, visible pores are unacceptable at or in the vicinity of the surface. ...

2021

Phase transformation induced distortions in red gold alloys

Margaux Nathalie Dominique Larcher

Red gold alloys owe their warm and attractive colour to the combination of gold and copper atoms. Thanks to their good mechanical properties and resistance to corrosion, red gold alloys are used in luxury industries as well as in dentistry. Around the equi ...

EPFL2021

Tribological Approach to the Watch Movements

Valentine Agnès Madeleine Magnin

Mechanical watches are complex and sensitive systems that have to maintain a faultless precision over their lifetime. However, this precision can be altered by disturbances occurring during the functioning time, such as friction, lubricant drying, or wear, ...

EPFL2020

Influence of Ir Additions and Icosahedral Short Range Order (ISRO) on Nucleation and Growth Kinetics in Au-20.5Wt Pct Cu-4.5Wt PctAg Alloy

Michel Rappaz

Based on detailed EBSD analyses, Kurtuldu et al. (Acta Mater. 70:240-248, 2014) have explained the grain refinement of Au-12.5 wt pctCu-12.5 wt pctAg (yellow gold) by the addition of minute amounts of Ir in terms of icosahedral quasicrystal (iQC)-mediated ...

SPRINGER2019

One-step access to N-enoxyimides by gold-catalysed addition of N-hydroxyimides to terminal alkynes

Nicolai Cramer, Coralie Danielle Annick Duchemin

N-Enoxyimides have become attractive substrates for novel catalytic transformations, yet their tedious multi-step synthesis hampers full exploitation of their synthetic potential. We report a gold(I)-catalyzed protocol to access N-enoxyimides from simple a ...

2019

Electrochemical Co-Deposition of Gold and Carbon Nanocapsules from a Colloidal Suspension

Stefano Mischler

This paper shows the preparation of a gold suspension containing carbon nanocapsules and their co-deposition from the colloidal galvanic bath on a nickel electrode to obtain gold/nanocapsules composite coatings. The incorporation of the nanocapsules was co ...

ELECTROCHEMICAL SOC INC2019

Tribological response of multilayered gold nickel coating deposited on fine turned surfaces

Stefano Mischler, Valentine Agnès Madeleine Magnin

Gold coating are widely used in industry due to their corrosion resistance, electrical conductivity and low contact resistance. However, friction and wear can limit their functionality and lifetime. This study addresses the degradation of a commercial fine ...

ELSEVIER SCIENCE SA2019

Mixed gold and platinum nanostructured layers for all-solid-state ion sensors

Giovanni De Micheli, Sandro Carrara, Danilo Demarchi, Irene Taurino, Francesca Criscuolo

The great interest in portable and wearable monitoring systems has promoted in recent years a major expansion of all-solid-state Ion-Selective Electrodes (ISEs). Nanostructured Solid-Contacts (SCs) have shown a promising potential in order to eliminate the ...

IEEE2018

Nanoparticle on mirror plasmonic nanostructure for molecular cavity optomechanics

Christophe Marcel Georges Galland, Santiago Tarrago Velez, Aqeel Ahmed

The plasmonic response of gold can be utilized to enhance the incident electromagnetic (EM) field by several orders of magnitude. When a gold nanoparticle is placed in close proximity to a gold film, the incident field can excite a deeply confined plasmon, ...

IEEE2018

Rapid, Selective Extraction of Trace Amounts of Gold from Complex Water Mixtures with a Metal-Organic Framework (MOF)/Polymer Composite

Emad Oveisi, Wendy Lee Queen, Natalia Gasilova, Shuliang Yang, Daniel Teav Sun

With the ever-increasing production of electronics, there is an ensuing need for gold extraction from sources other than virgin mines. Currently, there are no technologies reported to date that can effectively and selectively concentrate ultratrace amounts ...

AMER CHEMICAL SOC2018

Gold-catalyzed domino cyclization-alkynylation reactions with EBX reagents: new insights into the reaction mechanism

Jérôme Waser, Paola Caramenti, Yifan Li

Gold-catalyzed domino processes constitute a useful alternative to C-H functionalization for the synthesis of functionalized (hetero)arenes. Herein, we report computational studies on the gold-catalyzed cyclization alkynylation of keto-allenes with ethynyl ...

2017

Recent Advances in the Synthesis and Applications of Multimodal Gold-Iron Nanoparticles

Francesco Stellacci

Bimetallic particles based on gold and iron have been gathering increasing interest in biomedical applications because of the synergic combination of the plasmonic features of the inert gold component with the magnetic properties of the iron or iron oxide ...

Bentham Science Publishers2017

Significance of surface charge and shell material of superparamagnetic iron oxide nanoparticle (SPION) based core/shell nanoparticles on the composition of the protein corona

Heinrich Hofmann, Lionel André Maurizi, Usawadee Sakulkhu, Géraldine Sylvie Coullerez

As nanoparticles (NPs) are increasingly used in many applications their safety and efficient applications in nanomedicine have become concerns. Protein coronas on nanomaterials' surfaces can influence how the cell "recognizes" nanoparticles, as well as the ...

Royal Soc Chemistry2015

Probability of twin boundary formation associated with the nucleation of equiaxed grains on icosahedral quasicrystal templates

Michel Rappaz, Güven Kurtuldu

Recently, we have shown that minute Cr additions (typically 0.1 wt%) to Al-Zn alloys solidified in a uniform temperature field lead to the formation of fine equiaxed fcc Al grains [1]. Furthermore, these grains exhibit an unexpectedly large number of twin, ...

Iop Publishing Ltd2015

Gold Metal Liquid-Like Droplets

Hubert Girault, Heron Vrubel, Manuel Alejandro Méndez Agudelo, Evgeny Smirnov, Dmitry Momotenko, Micheal Diarmaid Scanlon

Simple methods to self-assemble coatings and films encompassing nanoparticles are highly desirable in many practical scenarios, yet scarcely any examples of simple, robust approaches to coat macroscopic droplets with continuous, thick (multilayer), reflect ...

Amer Chemical Soc2014

Parallel Transduction of Nanomechanical Motion Using Plasmonic Resonators

Tobias Kippenberg

We demonstrate parallel transduction of thermally driven mechanical motion of an array of gold-coated silicon nitride nanomechanical beams, by using near-field confinement in plasmonic metal-insulator metal resonators supported in the gap between the gold ...

Amer Chemical Soc2014

Grain Boundary Relaxation in 18-carat Gold Alloys

Ann-Kathrin Audren

Grain boundaries (GBs) play an important role for the mechanical properties of metals. In addition to dislocation motion inside the grains, some metal alloys deform along the GBs at high temperatures. GBs can also be the cause of a brittle behaviour of som ...

EPFL2014

Icosahedral quasicrystal-enhanced nucleation of the fcc phase in liquid gold alloys

Michel Rappaz, Güven Kurtuldu

Although the grain refinement of yellow gold alloys with Jr has been used in industry and known for nearly half a century, the basic mechanism is still unknown. The present contribution shows that the mechanism is the same as that evidenced recently in Al- ...

Elsevier2014