Stefano MischlerStefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
Pablo Antolin SanchezEnseignement et PhD Doctorant·es actuel·les Philipp Christoph Weder, Davor Dobrota A co-dirigé les thèses EPFL de Ondine Chanon Cours Analysis III MATH-202(c) Le cours étudie les concepts fondamentaux de l'analyse vectorielle et de l'analyse de Fourier-Laplace en vue de leur utilisation pour résoudre des problèmes pluridisciplinaires d'ingénierie scientifique. Analysis III (for IC) MATH-203(d) Le cours étudie les concepts fondamentaux de l'analyse vectorielle et de l'analys
Katrin BeyerSince 2017 Associate Professor, School of Architecture, Civil and Environmental Engineering (ENAC), EPFL. Head of the Earthquake Engineering and Structural Dynamics (EESD) Laboratory
2010-2017 Assistant Professor, EPFL.
2008-2010 Post-doctoral researcher, ETH Zürich.
2003-2007 Ph.D., Roseschool / Università di Pavia, Italy.
2001-2003 Ove Arup & Partners, Advanced Technology and Research Group, London.
2001 Diploma, Civil engineering, ETH Zürich.
Kamiar AminianExpertise
Biomechanics of human movement Wearable Technology / Inertial sensors Gait Analysis / Physical Activity Monitoring Physical activity Patterns Sport Performance Orthopedics / Rehabilitation engineering Fall Prevention in Elderly Motor function in Parkinson disease Physical behavior in chronic pain
Expertise
Biomechanics of human movement Wearable Technology / Inertial sensors Gait Analysis / Physical Activity Monitoring Physical activity Patterns Sport Performance Orthopedics / Rehabilitation engin
Albert RenkenEnseignement et PhD A dirigé les thèses EPFL de Serge Maeder, Jacques Membrez, Stéphane Porchet, Philippe Menoud, Brigitta Frank, Harvey Randall, Wolfgang Zimmerer, Frédéric Van Vyve, Serge Golay, Jianzhong Yang, Stéphane Dubuis, Philippe Warnery, Anders Nattorp, Christian Spühler, Laurent Cavin, Miriam Lorenzi, Bastien Monnerat, André Rouge, Olivier Wolfrath, Peter Stahl, Ralf Maurer, Konrad Geissler, Volker Höller, Benoît Louis, Pierre Reuse, Fabio Rainone, Eric Joannet, Chrystèle Horny A co-dirigé les th
Guillaume AnciauxEnseignement et PhD Doctorant·es actuel·les Parissasadat Alavi, Thibault Ghesquière-Diérickx A co-dirigé les thèses EPFL de Srinivasa Babu Ramisetti, Jaehyun Cho, Lucas Frérot, Mohit Pundir, Manon Eugénie Voisin--Leprince Cours Modélisation numérique des solides et structures CIVIL-321 La modélisation numérique des solides est abordée à travers la méthode des éléments finis. Les aspects purement analytiques sont d'abord présentés, puis les moyens d'interpolation, d'intégration et de résolu
Simon Nessim HeneinSimon Henein obtient son diplôme d’ingénieur en microtechnique de l’Ecole Polytechnique Fédérale de Lausanne (EPFL) en 1996, puis le titre de docteur ès sciences techniques de cette même institution en 2000. En 2001 il publie un livre intitulé « Conception des guidages flexibles » qui devient une référence dans le monde de la conception micromécanique. Ce livre sera traduit en anglais et complété dans un ouvrage collectif intitulé "The art of flexure mechanism design" publié en 2017.Simon Henein s’engage ensuite professionnellement au Centre Suisse d’Electronique et Microtechnique (CSEM) où il conçoit et développe des mécanismes dédiés à des applications robotiques, spatiales, astrophysique, biomédicales et horlogères, ainsi qu’à l’Institut Paul Scherrer où il développe des instruments pour le synchrotron suisse SLS. Depuis le 1er novembre 2012, il est professeur associé en microtechnique à l’EPFL et directeur du Laboratoire de conception micromécanique et horlogère (Instant-Lab). De 2020 à 2021 il effectue un congé de recherche en tant que professeur invité au Centre d'études théâtrales de l'Université de Lausanne (faculté des lettres).
Mathieu SalzmannI am a Senior Researcher at EPFL-CVLab, and, since May 2020, an Artificial Intelligence Engineer at ClearSpace (50%). Previously, I was a Senior Researcher and Research Leader in NICTA's computer vision research group. Prior to this, from Sept. 2010 to Jan 2012, I was a Research Assistant Professor at TTI-Chicago, and, from Feb. 2009 to Aug. 2010, a postdoctoral fellow at ICSI and EECS at UC Berkeley under the supervision of Prof. Trevor Darrell. I obtained my PhD in Jan. 2009 from EPFL under the supervision of Prof. Pascal Fua.
Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Frédéric MilaEnseignement et PhD Doctorant·es actuel·les Afonso Dos Santos Rufino, Mohamed Zakaria Jouini, Tianyue Huang A dirigé les thèses EPFL de Thomas Gloor, François Vernay, Cédric Weber, Julien Dorier, Julien Sudan, Tamás András Tóth, Tommaso Coletta, Frédéric Alexis Michaud, Jérôme Dufour, Natalia Chepiga, Laurent Pagnier, Francisco Hyunkyu Kim, Melvyn Sandy Tyloo, Samuel Gozel, Jeanne Colbois, Ivo Aguiar Maceira, Mithilesh Nayak, Samuel Louis Nyckees, Keita Omiya A co-dirigé les thèses EPFL de Alex Kruchkov,
