Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Flexible electronics

Publications associées (30)

Characterization of a flexible a-Si:H detector for in vivo dosimetry in therapeutic x-ray beams

Nicolas Würsch, Jonathan Emanuel Thomet, Luca Massimiliano Antognini, Sylvain Dunand

BackgroundThe increasing use of complex and high dose-rate treatments in radiation therapy necessitates advanced detectors to provide accurate dosimetry. Rather than relying on pre-treatment quality assurance (QA) measurements alone, many countries are now ...

Wiley2024

HASPIDE: a project for the development of hydrogenated amorphous silicon radiation sensors on a flexible substrate

Giovanni De Cesare, Sylvain Dunand, Luca Massimiliano Antognini, Jonathan Emanuel Thomet

Hydrogenated amorphous silicon (a-Si:H) is a material with a very good radiation hardness and with the possibility of deposition on flexible substrates like Polyimide (PI). Exploiting these properties, the HASPIDE (Hydrogenated Amorphous Silicon PIxels DEt ...

Iop Publishing Ltd2024

All-Dielectric Nanophotonic via Glass Fluid Instabilities

Pierre-Luc Eloi Piveteau

In this thesis work, we propose to exploit an innovative micro/nano-fabrication process, based on controlled fluid instabilities of a thin viscous film of chalcogenide glass. Amorphous selenium and arsenic triselenide were used in this thesis work, and com ...

EPFL2024

Structural divergence of molecular hole selective materials for viable p-i-n perovskite photovoltaics: a comprehensive review

Mohammad Khaja Nazeeruddin, Peng Gao

Perovskite solar cells (PSCs) have garnered significant attention within the photovoltaic research community due to their remarkable progress in just one decade. Among the device configurations, the p-i-n structured PSC offers several advantages, including ...

Royal Society of Chemistry2024

Simultaneous local sensing of two chemical properties with dual soft probe scanning electrochemical microscopy

Hubert Girault, Andreas Stephan Lesch

A new method for the rapid and economic fabrication of dual soft microelectrodes for Soft-Probe-Scanning electrochemical microscopy (Soft-Probe-SECM) and their use for the simultaneous local detection of locally generated species is presented. The process ...

PERGAMON-ELSEVIER SCIENCE LTD2023

X-ray qualification of hydrogenated amorphous silicon sensors on flexible substrate

Nicolas Würsch, Luca Massimiliano Antognini, Sylvain Dunand

Hydrogenated amorphous silicon (a-Si:H) is a well known material for its radiation resistance and for the possibility of deposition on flexible substrates like Polyimide (PI), polyethylene terephthalate (PET) or polyethylene naphthalate (PEN). Due to the p ...

IEEE2023

TCAD modelling of a-Si:H devices for particle detection applications

Nicolas Würsch, Luca Massimiliano Antognini, Sylvain Dunand

Hydrogenated amorphous silicon (a-Si:H) has been proposed as a suitable material for particle detection applications thanks to its property to be deposited over a large area and above a variety of different substrates, including flexible materials. Moreove ...

Elsevier Sci Ltd2023

Amorphous Silicon Based Microchannel Plates for Time-of-Flight Positron Emission Tomography

Samira Alexandra Frey

Microchannel plates fabricated from hydrogenated amorphous silicon (AMCPs) are a promising alternative to conventional lead glass microchannel plates. Their main advantages lie in their cheaper and more flexible fabrication processes, allowing for adaptabl ...

EPFL2023

A variable stiffness magnetic catheter made of a conductive shape memory polymer for minimally invasive surgery

Dario Floreano, Jun Shintake, Yegor Piskarev

A hollow variable stiffness thread including a flexible inner tube, a conductive shape memory polymer (CSMP) layer arranged around the inner tube forming a variable stiffness zone, a flexible encapsulation layer arranged around the CSMP layer, and a first ...

2023

Data-Driven Discovery of Organic Electronic Materials Enabled by Hybrid Top-Down/Bottom-Up Design

Anne-Clémence Corminboeuf, Rubén Laplaza Solanas, Sergio Vela Llausi, Jacob Terence Blaskovits

The high-throughput exploration and screening of molecules for organic electronics involves either a 'top-down' curation and mining of existing repositories, or a 'bottom-up' assembly of user-defined fragments based on known synthetic templates. Both are t ...

Wiley-V C H Verlag Gmbh2023

Layered metals as polarized transparent conductors

Philip Johannes Walter Moll, Matthias Carsten Putzke, Chunyu Guo

The quest to improve transparent conductors balances two key goals: increasing electrical conductivity and increasing optical transparency. To improve both simultaneously is hindered by the physical limitation that good metals with high electrical conducti ...

Nature Portfolio2023

Additive and digital manufacturing of transient sensors and bioelectronics

Nicolas Francis Fumeaux

Transient electronics have emerged as a promising class of devices, capable of breaking down without harmful side effects to their environment. They have tremendous potential as bioresorbable electronics for temporary applications in the human body, and as ...

EPFL2023

Device Performance of Emerging Photovoltaic Materials (Version 4)

Mohammad Khaja Nazeeruddin, Tor Jesper Jacobsson, Fei Guo

Following the 3rd release of the "Emerging PV reports", the best achievements in the performance of emerging photovoltaic (e-PV) devices in diverse e-PV research subjects are summarized, as reported in peer-reviewed articles in academic journals since Augu ...

Wiley-V C H Verlag Gmbh2023

Drift-Diffusion Simulations of Charge Transport and Trap Dynamics in Organic Semiconductor Materials

Camilla Arietta Vael-Garn

Polymeric semiconductors have gained significant attention in the field of organic electronics due to their unique properties and potential applications. Through their ability to transport charge carriers and to absorb or emit light, they have attracted mu ...

EPFL2023

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Jz -Yuan Juo

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

EPFL2023

New Developments in Amorphous Silicon Based Microchannel Plates

Christophe Ballif, Nicolas Würsch, Luca Massimiliano Antognini, Samira Alexandra Frey, Mohammad Beygi

Microchannel plates fabricated from hydrogenated amorphous silicon (AMCPs) are a promising alternative to conventional glass microchannel plates. Their main advantages lie in their flexible fabrication processes, allowing for adaptable channel shapes and t ...

2023

New ultrahigh-speed device concepts: from THz nanoplasma devices to glass-like electronics for neuromorphic computation

Mohammad Samizadeh Nikooytabalvandani

There is a never-ending push for electronic systems to provide faster operation speeds, higher energy efficiencies, and higher power capabilities at smaller scales. These requirements are apparent in different areas of electronics, from radiofrequency (RF) ...

EPFL2023

Ultralow secondary electron emission and improved vacuum surface insulation of polyimide with scalable nanocomposite coating

Chao Wang, Guang-Yu Sun

Polymers with high surface electric insulation capability are greatly demanded in various electrical devices operating in vacuum ambient. Low secondary electron emission (SEE) is favorable to mitigate vacuum flashover by inhibiting the SEE avalanche across ...

ELSEVIER2022

80 K cryogenic stage for ice lithography

Danick Briand, Rubaiyet Iftekharul Haque, Jaemin Kim

We present a cryogenic system design and development for ice lithography. The cryo-stage is designed with embedded channels to allow direct liquid nitrogen flow, enabling fast cryogenic cooling, and low sample temperature. The stage cools down to 78.8 K in ...

ELSEVIER2022

A new versatile hybrid MEMS technology for high sensitivity, fluid proof sensing applications

Matthias Neuenschwander

The field of micro electromechanical systems (MEMS) evolved from the microelectronic industry and the technologies developed to fabricate integrated circuits. As a result, MEMS are commonly fabricated on silicon wafers. The development of MEMS has been dri ...

EPFL2022