Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Francesca RodinoExpertise
Electrochemical BiosensorsSensors and Biosensors interfaces | front-end electronicsBiomedical circuits and systems
RechercheOther Tavakolidakhrabadi, A., Domange, T., Nalm, C., Rodino, F., Meimandi, A., Bessire, C., & Carrara, S. (2024). A Novel Microfluidic System for Capacitive Detection via Magnetophoretic Separation of Malaria-Infected Red Blood Cells. IEEE Sensors Letters. DOI: 10.1109/LSENS.2024.3451238Barbruni, G. L., Rodino, F., Ros, P. M., Demarchi, D., Ghezzi, D., & Carrara, S. (2024). A
David Atienza AlonsoDavid Atienza Alonso is an associate professor of EE and director of the Embedded Systems Laboratory (ESL) at EPFL, Switzerland. He received his MSc and PhD degrees in computer science and engineering from UCM, Spain, and IMEC, Belgium, in 2001 and 2005, respectively. His research interests include system-level design methodologies for multi-processor system-on-chip (MPSoC) servers and edge AI architectures. Dr. Atienza has co-authored more than 350 papers, one book, and 12 patents in these previous areas. He has also received several recognitions and award, among them, the ICCAD 10-Year Retrospective Most Influential Paper Award in 2020, Design Automation Conference (DAC) Under-40 Innovators Award in 2018, the IEEE TCCPS Mid-Career Award in 2018, an ERC Consolidator Grant in 2016, the IEEE CEDA Early Career Award in 2013, the ACM SIGDA Outstanding New Faculty Award in 2012, and a Faculty Award from Sun Labs at Oracle in 2011. He has also earned two best paper awards at the VLSI-SoC 2009 and CST-HPCS 2012 conference, and five best paper award nominations at the DAC 2013, DATE 2013, WEHA-HPCS 2010, ICCAD 2006, and DAC 2004 conferences. He serves or has served as associate editor of IEEE Trans. on Computers (TC), IEEE Design & Test of Computers (D&T), IEEE Trans. on CAD (T-CAD), IEEE Transactions on Sustainable Computing (T-SUSC), and Elsevier Integration. He was the Technical Program Chair of DATE 2015 and General Chair of DATE 2017. He served as President of IEEE CEDA in the period 2018-2019 and was GOLD member of the Board of Governors of IEEE CASS from 2010 to 2012. He is a Distinguished Member of ACM and an IEEE Fellow.
Vivek SubramanianEnseignement et PhD Doctorant·es actuel·les Giovanni Ruffolo, Giada Romano, Sanjay Manoharan, Kyle Haas, Claude Dahan, Biruktait Ayele Lemecho, Yagmur Ceren Alatas, Tugçe Delipinar A dirigé les thèses EPFL de Amin Hodaei, Mustafa Mohieldin Fadlelmula Fadlelseed A co-dirigé les thèses EPFL de Mohammad Jafarpour Cours Organic and printed electronics MICRO-505 Ce cours traite de la mise en œuvre des technologies de l'électronique organique et imprimée: les matériaux, les procédés d'impression
Anja SkrivervikEnseignement et PhD Doctorant·es actuel·les Erik Ralf Algarp, Amir Mohsen Ahmadi Najafabadi, Behnaz Bakhtiari, Jiajun Li, Ahmet Bilir A dirigé les thèses EPFL de Christophe Caloz, Tomasz Grzegorczyk, Olivier Patrick Staub, Francisco Jesus Nunez, Katarina Blagovic, Julien Perruisseau-Carrier, Juliane Iten Chaves Simoes, Gabriela Quintero Diaz De Leon, Francesco Merli, Maddalena Violetti, Nuno Pires, Mohsen Koohestani, Jovanche Trajkovikj, Hamed Hasani, Anton Evgeniev Ivanov, Miroslav Veljovic, Danelys Rodr
Giuseppe SchiavoneEnseignement et PhD Cours Neural interfaces NX-422 Les interfaces neurales sont des systèmes bioélectroniques qui interfacent le système nerveux avec les technologies numériques. Ce cours présente leurs principaux éléments (transducteurs, instrumentation et communication) et passe en revue les matériaux et solutions technologiques actuels et futurs. Soft Microsystems Processing and Devices MICRO-618
Pierre DillenbourgAncien instituteur primaire, Pierre Dillenbourg obtient un master en Sciences de lEducation (Université de Mons, Belgique). Dans son projet de master en 1986, il est l'un des premiers au monde à appliquer les méthodes de 'machine learning' à l'éducation, afin de développer un 'self-improving teaching system'. Ceci lui permettra de débuter une thèse de doctorat en informatique à l'Université de Lancaster (UK) dans le domaine des applications éducatives de lintelligence artificielle. Il a été Maître dEnseignement et de Recherche à lUniversité de Genève. Il rejoint l'EPFL en 2012, où Il fut le directeur du Centre de Recherche sur l'Apprentissage, la formation et ses technologies(CRAFT), puis académique du Centre pour l'Education à l'Ere Digitale (CEDE) qui met en oeuvre la stratégie MOOC de l'EPFL (plus de 2 millions d'inscriptions). Il est actuellement professeur ordinaire en technologies de formation aux sein de la faculté Informatique et Communications et dirige laboratoire d'ergonomie éducative (CHILI). Depuis 2006, il a aussi été le directeur de DUAL-T, la 'leading house' dédiée aux technologies pour les systèmes de formation professionnelle duale. Il a fondé plusieurs start-ups dans l'éducation et rejoint plusieurs conseils d'administration. En 2017, Il a créé avec des collègues le 'Swiss EdTech Collider', un incubateur qui rassemble 80 start-ups dans le domaine des technologies éducatives. En 2018, ils ont lancé LEARN, le centre EPFL pour les sciences de l'apprentissage, lequel regroupe les initiatives locales en innovation éducative. Pierre est un 'inaugural fellow of the International Society of Learning Sciences'. Il est actuellement le Vice-Président Associé pour l'Education à l'EPFL.
Kamiar AminianExpertise
Biomechanics of human movement Wearable Technology / Inertial sensors Gait Analysis / Physical Activity Monitoring Physical activity Patterns Sport Performance Orthopedics / Rehabilitation engineering Fall Prevention in Elderly Motor function in Parkinson disease Physical behavior in chronic pain
Expertise
Biomechanics of human movement Wearable Technology / Inertial sensors Gait Analysis / Physical Activity Monitoring Physical activity Patterns Sport Performance Orthopedics / Rehabilitation engin
Stefano MischlerStefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
Afficher plus