Publications associées à Enroulement de Rogowski

Publications associées (25)

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Duccio Testa, Ambrine Douhane, Marcus Cemes

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Characterisation of electron cyclotron wall conditioning plasma in ASDEX Upgrade

Richard Pitts

Electron cyclotron wall condition (ECWC) discharges are characterised in ASDEX Upgrade with full tungsten plasma facing components and X2 polarised waves launched from the equatorial ports, relevant to ECWC conditions in ITER Pre-Fusion Power Operation pha ...

IOP Publishing Ltd2023

ICRH assisted breakdown study on JET

Benoît Labit, Haomin Sun, Thomas Binderup Jensen

Ion cyclotron (IC) wave assisted breakdown has the potential to increase the robustness of plasma initiation during the ITER pre-fusion operation phase. Studies were performed at JET at ITER relevant loop electric field, E-loop ? 0.33 Vm(-1), and a range o ...

IOP Publishing Ltd2023

Enhanced-DAB Converter: Comprehensive Design Evaluation

Elison de Nazareth Matioli, Armin Jafari, Mohammad Samizadeh Nikooytabalvandani

Soft switching in dual-active-bridge (DAB) converters enables their efficient operation at high frequencies, where the reduction in the size of magnetic components could result in ultra-high power densities. Nonetheless, losing soft-switching at high frequ ...

IEEE2021

Preliminary Tests of Soldered and Diffusion-Bonded Splices Between Nb3Sn Rutherford Cables for Graded High-Field Accelerator Magnets

Pierluigi Bruzzone, Davide Uglietti, Vincenzo D'Auria, Mithlesh Kumar

High-field accelerator magnets of the next generation will require coil grading in order to decrease the amount of superconductor and hence the magnet cost. The joints between Nb3Sn conductor grades must have low electrical resistance (

IEEE Institute of Electrical and Electronics Engineers2019

A Reconfigurable Inductor Based on Vanadium Dioxide Insulator-to-Metal Transition

Mihai Adrian Ionescu, Montserrat Fernandez-Bolanos Badia, Emanuele Andrea Casu, Matteo Cavalieri, Andrei Müller, Alessandro Fumarola

This letter introduces a reconfigurable planar square-coil-shaped inductor exploiting as the tuning mechanism the insulator-to-metal transition (IMT) of a vanadium dioxide (VO2) switch placed in the interwinding space in an unprecedented manner. The VO2 th ...

2018

Stabilization of the vertical instability by non-axisymmetric coils

Wilfred Anthony Cooper

In a published Physical Review Letter (Reiman 2007 Phys. Rev. Lett. 99 135007), it was shown that axisymmetric (or vertical) stability can be improved by placing a set of parallelogram coils above and below the plasma oriented at an angle to the constant t ...

IOP Publishing Ltd2016

Leakage Flux Modelling of Multi-Winding Transformer using Permeance Magnetic Circuit

Drazen Dujic, Min Luo

The size and position difference of the windings determine the leakage flux path and give rise to unbalance of the short-circuit impedances, which strongly affects the transient behaviour of the transformer. This work proposes a new approach of modelling w ...

Ieee2016

Electro-thermal virtual prototyping of a Rogowski Coil sensor system

Alain Vachoux, Juan Sebastian Rodriguez Estupinan

An electro-thermal model of a Rogowski Coil sensor system is here described. A co-design methodology between VHDL-AMS and Finite Element Analysis (FEA) has been used for modeling the entire system. The proposed modeling strategy uses geometrical FEA to com ...

IEEE2015

Electro-thermal modeling of a Rogowski coil sensor system

Alain Vachoux, Juan Sebastian Rodriguez Estupinan

This paper focuses on the electro-thermal modeling of an electrical current sensor, based on the Rogowski Coil transducer. We exploit the multi-domain capabilities of VHDL-AMS together with geometrical Finite Element Analysis (FEA) to create a time-depende ...

2015

Construction and test of a non-insulated insert coil using coated conductor tape

Pierluigi Bruzzone, Davide Uglietti, Rainer Wesche

A small coated conductor coil (central field 1 T at 200 A) was constructed and tested in order to evaluate the benefit and the possible disadvantages of non insulated, double pancake construction, in particular regarding quench protection. The insert coil ...

Iop Publishing Ltd2014

Modeling of High-Frequency Electromagnetic Effects on an Ironless Inductive Position Sensor

Yves Perriard, Alessandro Danisi

The ironless inductive position sensor (I2PS) is a five-coil air-cored structure that senses the variation of flux linkage between supply and sense coils and relates it to the linear position of a moving coil. In air-cored structures, the skin and proximit ...

Institute of Electrical and Electronics Engineers2013

Instrumentation of the Säntis Tower for Lightning Current Measurement

Carlos Alberto Romero Romero

In this thesis, a new experimental station was designed and built for the measurement of lightning currents. The station (Säntis Tower) was instrumented using advanced and modern equipment with remote monitoring for an accurate measurement of lightning cur ...

EPFL2012

A system for the measurements of lightning currents at the Säntis Tower

Farhad Rachidi-Haeri, Marcos Rubinstein, Mario Paolone, Carlos Alberto Romero Romero, Pierre Zweiacker, Abraham Rubinstein

The paper presents the characteristics of a system suitably developed to measure lightning current waveforms on the Santis Tower in Switzerland. The paper first describes the configuration of the system then presents the characteristics of the measurement ...

Elsevier2012

Compensation of the Instrumental Decay in Measured Lightning Electric Field Waveforms

Farhad Rachidi-Haeri, Marcos Rubinstein, José-Luis Bermudez

The proper characterization of lightning electric and magnetic fields is very important for a number of reasons, such as the study and design of lightning protection and the validation of return stroke models. Also, an accurate late time response of the se ...

Institute of Electrical and Electronics Engineers2012

Multilevel Modular DC/DC Converter for Regenerative Braking Using Supercapacitors

Alfred Rufer

Regenerative braking is presented in many electric traction applications such as electric and hybrid vehicles, lifts and railway. The regenerated energy can be stored for future use, increasing the efficiency of the system. This paper outlines the benefits ...

2012

Edge Localized Mode Control in TCV

Jonathan Rossel

The Tokamak concept, based on magnetic confinement of a hydrogen plasma, is one of today's most promising paths to energy production by nuclear fusion. The experimental scenarios leading to the largest fusion rate are based on a high confinement plasma reg ...

EPFL2012

Multilevel two quadrant DC/DC converter for regenerative braking in mobile applications

Alfred Rufer

In this paper different cascaded and multilevel topologies are compared for regenerative braking systems using supercapacitors (SC). It shows that the multilevel buck derived topology can beneficiate from both reduced voltage across the inductor and increa ...

2011

A 3D multi-mode geometry-independent RMP optimization method and its application to TCV

Yves Martin, Jean-Marc Moret, Jonathan Rossel

Resonant magnetic perturbation (RMP) and error field correction (EFC) produced by toroidally and poloidally distributed coil systems can be optimized if each coil is powered with an independent power supply. A 3D multi-mode geometry-independent Lagrange me ...

IOP2010

Dispositif de manipulation et de transport de perles magnetiques

Martinus Adela Maria Gijs, Amar Rida

A device for transporting magnetic or magnetisable microbeads ( 25 ) in a capillary chamber ( 14 ) comprises a permanent magnet ( 10 ) or an electromagnet ( 11 ) for subjecting the capillary chamber to a substantially uniform magnetic field, to apply a per ...

2009