Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Acrylonitrile butadiène styrène

Publications associées (28)

Thermoplastic Toughening of a Semiaromatic Polyamide with an Amino-telechelic Polyethylene

John Christopher Plummer, Holger Frauenrath, Michael Alan Giffin

Semiaromatic polyamides are used for metal replacementin advancedengineering applications to reduce weight and improve efficiency,but their range of application is limited by their inherent lack ofductility and toughness. Here, we combined semiaromatic pol ...

AMER CHEMICAL SOC2023

Biocompatible and Biodegradable 3D Printing from Bioplastics: A Review

Sandro Carrara

There has been a lot of interest in developing and producing biodegradable polymers to address the current environmental problem caused by the continued usage of synthetic polymers derived from petroleum products. Bioplastics have been identified as a poss ...

MDPI2023

Slot-Die Coating of an On-the-Shelf Polymer with Increased Dielectric Permittivity for Stack Actuators

Yauhen Sheima

Nitrile-butadiene rubbers (NBR) have been extensively used as dielectric materials due to their commercial availability, excellent mechanical properties, glass transition temperature below 0 degrees C, and increased dielectric permittivity owing to the pre ...

AMER CHEMICAL SOC2022

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Lorenz Hagelüken

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Static and dynamic mechanical properties of nanosilica and multiwalled carbon nanotube reinforced acrylonitrile butadiene styrene composites: theoretical mechanism of nanofiller reinforcement

Thomas Keller

Experimental and theoretical approaches were employed to analyze the static and dynamic mechanical properties of acrylonitrile butadiene styrene (ABS) nanocomposites reinforced with multiwalled carbon nanotube (MWCNT) and nanosilica. Enhanced stiffness and ...

SPRINGER2021

Direct, Mediated, and Delayed Intramolecular Singlet Fission Mechanism in Donor-Acceptor Copolymers

Anne-Clémence Corminboeuf, Maria Fumanal Quintana

Donor-acceptor (D-A) extended copolymers have shown great potential to be exploited for intramolecular singlet fission (iSF) because of their modular tunability and intrinsic ability to incorporate low-lying charge-transfer (CT) and a triplet-pair (1TT) st ...

2020

Copper(I) Based Photoredox Chemistry

Murat Alkan

Photoredox catalysis has become a powerful tool for chemists. However, the reliance on expensive Ir and Ru based photoredox catalysts (PC) motivates research for more sustainable options. Copper complexes based on favorable photophysical properties, high a ...

EPFL2020

Data-Driven Model for the Dynamic Characteristics of O-Rings for Gas Bearing Supported Rotors

Jürg Alexander Schiffmann, Philipp Kaspar Bättig

The measurement results of various nitrile butadiene rubber (NBR) O-Ring sizes are pre-sented, and reduced-order models are developed in order to predict the stiffness and damping coefficient as a function of O-Ring geometry, Shore hardness, squeeze, and e ...

2019

3D Printing and Supercritical Foaming of Hierarchical Cellular Materials

Matteo Gregorio Modesto Marascio

Hierarchical porous structures have been gathering interest in different fields owing to their unique properties associated with their multi-scale features. The observation of natural materials brought new insights into the functionality of cellular materi ...

EPFL2018

On the Limits of Precision Glass Molding for Diffractive Optical Elements

Karin Prater

Diffractive optical elements (DOEs) consist of surface reliefs with dimensions in the micrometer range and nanometer precision. Two technologies dominate: Elements replicated in plastic and directly microfabricated elements in fused silica. Plastic DOEs ar ...

EPFL2017

Precision glass molding of high-resolution diffractive optical elements

Hans Peter Herzig, Toralf Scharf, Karin Prater

The demand of high resolution diffractive optical elements (DOE) is growing. Smaller critical dimensions allow higher deflection angles and can fulfill more demanding requirements, which can only be met by using electron-beam lithography. Replication techn ...

Spie-Int Soc Optical Engineering2016

Multilevel Micro-Structuring of Glassy Carbon for Precision Glass Molding of Diffractive Optical Elements

Hans Peter Herzig, Toralf Scharf, Karin Prater

A consumer market for diffractive optical elements in glass can only be created if high efficient elements are available at affordable prices. In diffractive optics the efficiency and optical properties increases with the number of levels used, but in the ...

Spie-Int Soc Optical Engineering2015

Multilevel Micro-Structuring of Glassy Carbon Molds for Precision Glass Molding

Hans Peter Herzig, Toralf Scharf, Karin Prater

Replication techniques for diffractive optical elements (DOEs) in soft materials such as plastic injection molding are state of the art. For precision glass molding in glasses with high transition temperatures, molds with extreme thermal resistivity, low c ...

Spie-Int Soc Optical Engineering2015

In situ Neutron Diffraction during Casting: Determination of Rigidity Point in Grain Refined Al-Cu Alloys

Jean-Marie Drezet, Bastien Gilbert Pierre Mireux

The rigidity temperature of a solidifying alloy is the temperature at which the solid plus liquid phases are sufficiently coalesced to transmit long range tensile strains and stresses. It determines the point at which thermally induced deformations start t ...

Mdpi Ag2014

Surface micro-structuring of glassy carbon for precision glass molding of diffractive optical elements

Hans Peter Herzig, Toralf Scharf, Karin Prater

Glassy carbon is used nowadays for a variety of applications because of its mechanical strength, thermal stability and non-sticking adhesion properties. This makes it also a suitable candidate as mold material for precision compression molding of low and h ...

Spie-Int Soc Optical Engineering2014

Determination of Coherency and Rigidity Temperatures in Al-Cu Alloys Using In Situ Neutron Diffraction During Casting

Jean-Marie Drezet, Bastien Gilbert Pierre Mireux

The rigidity temperature of a solidifying alloy is the temperature at which the solid phase is sufficiently coalesced to transmit tensile stress. It is a major input parameter in numerical modeling of solidification processes as it defines the point at whi ...

Springer2014

Synthesis, Characterization, and Reactivity of the First Osmium beta-Diketiminato Complexes and Application in Catalysis

Paul Joseph Dyson, Rosario Scopelliti, Andrew Douglas Phillips

The strongly chelating anionic beta-diketiminate ligand has been employed to formulate complexes involving almost every metal of the periodic table; however, the heavier metals of the d block remain relatively unexplored. This paper describes the synthesis ...

Amer Chemical Soc2013

Styrene oxidation by hydrogen peroxide in ionic liquids: the role of the solvent on the competition between two Pd-catalyzed processes, oxidation and dimerization

Paul Joseph Dyson

A series of hydrophilic N,N-dimethylpyrrolidinium-and N,N-dimethylpiperidinium-based ionic liquids (ILs) have been prepared and applied as reaction media in the Wacker oxidation of styrene by hydrogen peroxide using PdCl2 as the catalyst. The efficiency of ...

2011

Synthesis of Unusual Oxime Ethers by Reaction of Tetranitromethane with B-Alkylcatecholboranes

Philippe Renaud, Kurt Schenk

The reaction of tetranitromethane with B-alkylcatecholboranes leads to the formation of unusual dinitrooxime ethers. A tentative mechanism is provided, which suggests the involvement of extremely fast addition of alkyl radicals to tetranitromethane. The su ...

2010

Metallocene Catalyzed Polyolefins For Improving Thermal And Mechanical Properties Of Bitumen Blends

Jan-Anders Edvin Maansson, John Christopher Plummer, Chiara Spadaro

Bitumen is a complex viscoelastic material used as a binder in applications ranging from road paving to waterproof membranes for roofing [1]. In such applications, bitumen is often blended with a polymer in order to improve its elasticity. The resulting po ...

2010