Sandrine GerberSandrine Gerber studied chemistry at the "Ecole Nationale Supérieure de Chimie de Paris" in France, where she obtained a diploma of chemical engineer in 1993. The same year she obtained a DEA (Master degree) of organic chemistry at the University Pierre et Marie Curie (Paris VI, France). From 1993 to 1996 she did a PhD in organic chemistry under the supervision of Prof. Jean-Pierre Genêt at the Ecole Nationale Supérieure de Chimie de Paris. In 1996, she moved to University of Lausanne for a post-doctoral stay under the supervision of Prof. Pierre Vogel. In 1998, she was appointed Maître-Assistante at the Institute of Organic Chemistry in the University of Lausanne. In 2003, she obtained the habilitation to direct research from the University Pierre et Marie Curie (Paris VI, France). The same year, she was appointed scientific adjunct at the EPFL and senior scientist (Maître d'Enseignement et de Recherche) in 2006. In December 2014, she was promoted to titular professor. Since September 2007, Sandrine Gerber is deputy to the director of the Institute of Chemical Sciences and Engineering (ISIC). She is also member of the Board of Directors of the Swiss Chemical Society. Since 2007, Sandrine Gerber is part-time lecturer at the university of Fribourg. She was awarded the Prize Eugene Schueller in 1997, the Prize Dufour for prospective organic chemistry in 2005 and the Werner Prize 2010. She also received a special mention in recognition of exceptional quality of pedagogic competencies in the teaching of basic sciences, given by the Direction of the School of Biology and Medicine from the University of Lausanne, in 2013. In October 2018, she will receive the Prize for Excellence in Teaching from the section of Chemistry and Chemical Engineering.
Dominique PiolettiDominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
Ute KochEnseignement et PhD A co-dirigé les thèses EPFL de Delphine Tardivon, Mateusz Waldemar Antoszewski Cours Practical - Radtke Lab BIO-630 Self renewing organs.Flow Cytometry as tools for the analysis of the hematopoietic system.
Li TangEducation and Training Postdoctoral Fellow, Massachusetts Institute of Technology, 2013 - 2016 Ph.D., University of Illinois at Urbana-Champaign, 2007 - 2012 B.S., Peking University, 2003-2007
Patrick Daniel BarthProfessor Patrick Barth is Associate Professor at EPFL and Adjunct Associate Professor at Baylor College of Medicine, Houston, TX, USA. He received training in Physics, Chemistry and Biology (University of Paris, ENS) in France and performed his PhD at the Commissiariat a l'Energie Atomique in Saclay, France on structure/function studies of membrane proteins (photosystem I) using biochemical and biophysical experimental techniques. He carried out postdoctoral studies at University of California at Berkeley with Tom Alber on computational development for calculating protein electrostatics and designing de novo selective peptide inhibitors of cellular protein interactions. He then went to the University of Washington as a postdoctoral fellow and instructor in David Baker's laboratory to develop computational techniques in the software Rosetta for predicting and designing membrane protein structures. He started his independent career and received tenure at Baylor College of Medicine. He will continue at EPFL to marry computation and experiment for understanding the molecular determinants of signal transduction, as well as modeling and designing membrane proteins with novel functions for various synthetic biology and therapeutic applications.
Bernard SchneiderEnseignement et PhD Doctorant·es actuel·les Yesica Gloria, Christian Schellhaas A dirigé les thèses EPFL de Vanessa Laversenne, Sameer Mohammad Khaleel Nazeeruddin, Emma Charlotta Källstig A co-dirigé les thèses EPFL de Philippe Guillaume Coune, Emilda Pino, Elisabeth Anne Dirren, Aurélien Lathuilière, Wojciech Janusz Bobela, Lu Zheng, Cylia Cloé Rochat Cours Methods: from disease models to therapy BIOENG-518 Ce cours décrira les méthodes qui sont à la base des approches translationnelles
Romain ZuffereyEnseignement et PhD Cours Biologie pour ingénieurs MSE-212 Le cours est une introduction aux sciences de la vie en tant que domaine pluridisciplinaire ayant de multiples connexions avec l'ingénierie des matériaux. Il permettra aux étudiants de trouver dans la biologie une inspiration lors des leur activités dans le domaine des matérieaux. Cellular biology and biochemistry for engineers BIO-105 Cours intégré d'introduction à la biologie cellulaire et la biochimie pour étudiant
Didier TronoAprès des études de médecine à l’Université de Genève et une formation clinique en pathologie, médecine interne et maladies infectieuses à Genève et au Massachusetts General Hospital de Boston, Didier Trono s’engage dans une carrière scientifique au Whitehead Institute du MIT. En 1990, il est recruté par le Salk Institute de San Diego pour lancer un centre de recherche sur le SIDA. Il rentre en Europe sept ans plus tard, avant de prendre en 2004 les rênes de la toute nouvelle faculté des Sciences de la Vie de l’EPFL, dont il orchestre le développement et qu’il dirige jusqu’en 2012. Il participe aujourd’hui activement à la coordination des efforts de la Suisse en vue de l’intégration des nouvelles technologies dans le domaine de la médecine de précision et de la santé personnalisée.
Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
Johan AuwerxEnseignement et PhD Doctorant·es actuel·les Wenyu Liu, Maria Boulougouri, Giacomo Vincenzo Giorgio Von Alvensleben A dirigé les thèses EPFL de Pénélope Andreux, Mitsunori Nomura, Evan Graehl Williams, Hongbo Zhang, Virginija Jovaisaite, Elena Katsyuba, Karim Laurent Gariani, Adrienne Joëlle Laurence Mottis, Hao Li, Peiling Luan, Alexis Bachmann, Mario Romani, Xiaoxu Li, Alessia De Masi, Amélia Lalou A co-dirigé les thèses EPFL de Serge Thanh Son Ducommun, Laura Lukjanenko, Joanna Ratajczak, Angélique Sato
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Arnaud BertschExpertise
MicrostereolithographiePhotopolymersMicrofabrication
Enseignement et PhD Doctorant·es actuel·les Tao Zhang, Pol Torres Vila, Nicolas Bruno Minazzo A co-dirigé les thèses EPFL de Joan Teixidor, Clémentine Sophie Sarah Lipp, Nicolas Grégoire Maïno, Jiande Zhou, Jongeon Park Cours Advanced microfabrication practicals MICRO-373 Ce TP permet une formation approfondie sur les méthodes avancées de micro et nanofabrication dans un environnement de salle blanche pour des applications séle
