Roger FilligerEnseignement et PhD Cours Manufacturing systems and supply chain dynamics MICRO-448 Ce cours traite des aspects quantitatifs relatifs à la performance affectant le comportement des systèmes de production.
Sebastian Duque MahechaEnseignement et PhD Cours Stéréotomie AR-211 La Stéréotomie est l'art de concevoir et fabriquer des volumes complexes en pierre et des assemblages en bois. Ce cours propose une réinterprétation de la Stéréotomie avec différents outils, une réflexion sur la géométrie, les processus de fabrication, les modes de représentation, de communication.
Ignacio Ferrer Perez-BlancoEnseignement et PhD Cours Stéréotomie AR-211 La Stéréotomie est l'art de concevoir et fabriquer des volumes complexes en pierre et des assemblages en bois. Ce cours propose une réinterprétation de la Stéréotomie avec différents outils, une réflexion sur la géométrie, les processus de fabrication, les modes de représentation, de communication.
Andres Osorio SalazarExpertise
Robotics, advanced actuator design, soft actuators, sensor design, embedded systems, human-machine interface architecture, electronic-less control, mechanism design, additive and traditional manufacturing, industrial automation, process control, and fluid robotics.
Current Work
Smart Footwear for Diabetic Foot Care and Ulcer PreventionEvery 20 seconds, a person with diabetes has to face an amputation somewhere in the world. The main risk factor is high plantar pressure combined with foot nephropat
Yujia ZhangEnseignement et PhD Doctorant·es actuel·les Yuyan Su, Shulang Shen, Jiaqi Liu Cours Advanced microfabrication practicals MICRO-373 Ce TP permet une formation approfondie sur les méthodes avancées de micro et nanofabrication dans un environnement de salle blanche pour des applications sélectionnées, d'acquérir des connaissances plus approfondies sur les processus MEMS/NEMS, de travailler dans un petit groupe avec des doctorants/ MOOC: Micro and Nanofabrication (MEMS) - Fall MICRO-
Arnaud BertschExpertise
MicrostereolithographiePhotopolymersMicrofabrication
Enseignement et PhD Doctorant·es actuel·les Tao Zhang, Pol Torres Vila, Nicolas Bruno Minazzo A co-dirigé les thèses EPFL de Joan Teixidor, Clémentine Sophie Sarah Lipp, Nicolas Grégoire Maïno, Jiande Zhou, Jongeon Park Cours Advanced microfabrication practicals MICRO-373 Ce TP permet une formation approfondie sur les méthodes avancées de micro et nanofabrication dans un environnement de salle blanche pour des applications séle
Baraka Jean-Claude MunyakaExpertise
Transport modelling, Logistics, Supply Chain Systems, and Urban Planning, Geospatial Analysis, Lean Manufacturing
Dr. Jean-Claude Munyaka Baraka is a Research Collaborator at the Urban and Regional Planning Community (CEAT) at the Swiss Federal Institute of Technology in Lausanne (EPFL). A citizen of the Democratic Republic of Congo, Dr. Munyaka holds a Doctorate in Industrial and Systems Engineering from the University of Pretoria, South Africa, and earned his Master's degree with Cum Laude in th
Jérôme ChenalExpertise
UrbanismePlanification urbaineGestion urbaineProcessus d
Situation actuelle
Directeur du Centre "Excellence in Africa "Directeur de la CEATProfesseur affilié UM6P
Associations prof. et activités académiques Membre du Conseil d'administration de l'Université Senghor, Alexandrie (2025-2029)Directeur du Board of Directors de l'African Cities LabEditeur de l'African Cites JournalPrésident de la Biennale Africaine d'Architecture et d'urbanisme (BAAU)Médias Jérôme Chenal, la passion des villes et de l'A
Zihan LiGraduated from University of Science and Technology of China with a bachelor’s degree in optics. And now, I am working on LiNbO3 integrated photonic device and related nanofabrication technology.
Tobias KippenbergEnseignement et PhD Doctorant·es actuel·les Mengxin Lin, Xinru Ji, Shuhang Zheng, Junyin Zhang, Zhuoya Yuan, Evgenii Guzovskii, Mahdi Chegnizadeh, Jiale Sun, Shivaprasad Umesh Hulyal, Xiaoyi Cheng, Hao Li, Nikolai Kuznetsov, Alessio Zicoschi, Jiahe Pan, Mikael Sebastian Reichler, Xuxin Wang, Donato Manuel Jiménez Benetó, Xuan Yang, Hugo Paul Arbez, Amirali Arabmoheghi, Viacheslav Snigirev, Alisa Davydova, Zihan Li, Giovanni Scarioni A dirigé les thèses EPFL de Stefan Weis, Emanuel Gavartin, Xiaoqing Zhou,
John BotsisJohn (Ioannis) Botsis obtained his diplôme in civil engineering at the University of Patras, Greece in 1979. He continued his education at Case Institute of Technology in Cleveland Ohio/USA, where he received his MS and Ph.D. in 1984. After two years at the research center for national defense in Athens he was nominated assistant professor at the University of Illinois in Chicago, associate in 1991 and full professor in 1995. In 1996, he was nominated professor of solids and structural mechanics at the EPFL. At EPFL he teaches mechanics of structures and mechanics of continuous media´ at the bachelors level and Fracture mechanics at the masters and doctoral levels. His research covers the mechanics of solids and structures, fracture mechanics and micromechanics of polymers, metals and their composites as well as biomechanics. He is also actively involved in full-filed optical methods for surface strain measurements as well as internal strain measurements using fiber Bragg grating sensors, aimed at characterizing micromechanics of fracture, residual strains and strain distribution in composite laminates for structural monitoring. Funding for his research comes from the Swiss National Science Foundation, State Secretariat for Education and Research and Swiss industry. He retired on February 28, 2020.
Yves PerriardYves Perriard was born in Lausanne in 1965. He received the M. Sc. in Microengineering from the Swiss Federal Institute of Technology - Lausanne (EPFL) in 1989 and the Ph D. degree in 1992. Co-founder of Micro-Beam SA, he was CEO of this company involved in high precision electric drive. Senior lecturer from 1998 and professor since 2003, he is currently director of Laboratory of Integrated Actuators. His research interests are in the field of new actuator design and associated electronic devices. In 2009, he is appointed Vice-Director of the Microengineering Institute in Neuchâtel until 2011. In 2013 the Federal Council has named him the the CTI commission in Bern. In 2014 he is appointed guest professor at Zhejiang University in China. In 2017, the lab is granted by the Werner Siemens Foundation of an amount of 12 millions CHF in order to set up a new Center for Artificial Muscules. Since 2018, he is Expert with Innosuisse, the new Swiss Innovation Agency. http://scholar.google.com/citations?hl=fr&user=V2onuO8AAAAJ https://actu.epfl.ch/news/a-12-million-franc-donation-to-create-a-center-for/ Farhad Rachidi-HaeriFarhad Rachidi (IEEE Fellow, EMP Fellow, Electromagnetics Academy Fellow) was born in Geneva in 1962. He received the M.S. degree in electrical engineering and the Ph.D. degree from the Swiss Federal Institute of Technology, Lausanne, in 1986 and 1991 respectively.
He worked at the Power Systems Laboratory of the same institute until 1996 and had several short stays at the University of Florida and the NASA Kennedy Space Center. In 1997, he joined the Lightning Research Laboratory of the University of Toronto in Canada and from April 1998 until September 1999, he was with Montena EMC in Switzerland. He is currently a titular professor and the head of the EMC Laboratory at the Swiss Federal Institute of Technology, Lausanne, Switzerland.
His research interests concern electromagnetic compatibility, lightning electromagnetics and electromagnetic field interactions with transmission lines.
Dr. Rachidi is currently a member of the Advisory Board of the IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY and the President of the Swiss National Committee of the International Union of Radio Science.
He has received numerous awards including the 2005 IEEE EMC Technical Achievement Award, the 2005 CIGRE Technical Committee Award, the 2006 Blondel Medal from the French Association of Electrical Engineering, Electronics, Information Technology and Communication (SEE), the 2016 Berger Award from the International Conference on Lightning Protection, the 2016 Best Paper Award of the IEEE Transactions on EMC, and the 2017 Motohisa Kanda Award for the most cited paper of the IEEE Transactions on EMC (2012-2016).
In 2014, he was conferred the title of Honorary Professor of the Xi’an Jiaotong University in China.
He served as the Vice-Chair of the European COST Action on the Physics of Lightning Flash and its Effects from 2005 to 2009, the Chairman of the 2008 European Electromagnetics International Symposium, the President of the International Conference on Lightning Protection from 2008 to 2014, the Editor-in-Chief of the Open Atmospheric Science Journal (2010-2012) and the Editor-in-Chief of the IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY from 2013 to 2015. He is a Fellow of the IEEE and of the SUMMA Foundation, and a member of the Swiss Academy of Sciences.
He is the author or coauthor of over 200 scientific papers published in peer-reviewed journals and over 400 papers presented at international conferences.
Mario PaoloneMario Paolone received the M.Sc. (with honors) and the Ph.D. degree in electrical engineering from the University of Bologna, Italy, in 1998 and 2002, respectively. In 2005, he was appointed assistant professor in power systems at the University of Bologna where he was with the Power Systems laboratory until 2011. In 2010, he received the Associate Professor eligibility from the Politecnico di Milano, Italy. Since 2011 he joined the Swiss Federal Institute of Technology, Lausanne, Switzerland, where he is now Full Professor, Chair of the Distributed Electrical Systems laboratory and Head of the Swiss Competence Center for Energy Research (SCCER) FURIES (Future Swiss Electrical infrastructure). He was co-chairperson of the technical programme committees of the 9th edition of the International Conference of Power Systems Transients (IPST 2009) and of the 2016 Power Systems Computation Conference (PSCC 2016). He was chair of the technical programme committee of the 2018 Power Systems Computation Conference (PSCC 2018). In 2013, he was the recipient of the IEEE EMC Society Technical Achievement Award. He was co-author of several papers that received the following awards: best IEEE Transactions on EMC paper award for the year 2017, in 2014 best paper award at the 13th International Conference on Probabilistic Methods Applied to Power Systems, Durham, UK, in 2013 Basil Papadias best paper award at the 2013 IEEE PowerTech, Grenoble, France, in 2008 best paper award at the International Universities Power Engineering Conference (UPEC). He was the founder Editor-in-Chief of the Elsevier journal Sustainable Energy, Grids and Networks and was Associate Editor of the IEEE Transactions on Industrial Informatics. His research interests are in power systems with particular reference to real-time monitoring and operation, power system protections, power systems dynamics and power system transients. Mario Paolone is author or coauthor of over 300 scientific papers published in reviewed journals and international conferences.
Eric BoillatContact Microcity
Phone: 41 21 69 54456
Enseignement et PhD A co-dirigé les thèses EPFL de Serguei Kolossov, Cédric André, Jamasp Jhabvala, Christoph Van Gestel, Tatiana Polivnikova, Nikola Kalentics Cours Introduction to additive manufacturing ME-413 On présente l'état de l'art dans le domaine des procédés addifitifs (où la pièce est fabriquée par ajout de matière sans utilisation d'outil de forme). Les applications/avantages/limitations des procédés principaux seront discutés ainsi que
Paul Joseph DysonPaul Dyson rejoignit l’EPFL en 2002 à la tête du Laboratoire de chimie organométallique et médicinale de l’Institut des sciences et ingénierie chimiques, dont il en assuma ensuite la direction entre 2008 et 2016.
Le prof. Dyson a été récompensé par de nombreux prix dont le Prix Werner de la Société Suisse de Chimie en 2004, le Prix pour les réalisations exceptionnelles en chimie bio organométallique en 2010, la Médaille du Centenaire de la naissance de Luigi Sacconi (2011) de la Société Italienne de Chimie, le Prix de Chimie bio-inorganique de la Royal Society of Chemistry en 2015, le Prix européen pour une chimie durable de la Société Européenne de Chimie en 2018 et le Prix pour la chimie verte de la Royal Society of Chemistry en 2020.
Le prof. Dyson est également mentionné dans la liste établie par Clarivate des chercheurs les plus cités (Clarivate Highly Cited Researcher), avec un H-index >110 (Web of Science et Google Scholar). Paul Dyson a été élu membre de la Royal Société de Chimie en 2010, membre de l’Académie Européenne des Sciences en 2019 et membre à vie de l’Association Américaine pour l’Avancement de la Science en 2020. Au cours des dernières années il s’est vu décerner le titre de Professeurs Hôte par l’Université de Bourgogne, l’Université de Pierre et Marie Curie, l’Université de Vienne, l’Université de Rome Tor Vergara, l'Ecole Nationale Supérieure de chimie de Paris (Chimie ParisTech) et par l’Université de Shangai Jiao Tong.
De 2016 à 2021 il était membre du conseil de la recherche de la division de mathématique, sciences naturelles et de l’ingénieur du Fonds National Suisse. En 2021, il a été nommé doyen de la Faculté des Sciences de Base.
Daniel GörlEnseignement et PhD Cours Organic chemistry MSE-211 Cet enseignement fournit les bases de la chimie organique et de la chimie des polymères, dont notamment lanomenclature en chimie, les mécanismes de réaction ainsi que des méthodes de synthèse organique et de synthèse depolymères. Polymer science + TP MSE-360 Introduction à la physique des polymères et aux liens entre structures chimiques et propriétés macroscopiques, avec accent sur la morphologie et le comportement thermomé
